These machines transfer the heat generated by cutting to the chips created by the saw blade. Therefore, the blade and material being cut remain cold, unlike an abrasive saw, which abrades the metal and creates a great deal of heat in the metal and cutting blade. Cold saws use either a solid high speed steel (HSS) or tungsten carbide-tipped, resharpenable circular saw blade. They are equipped with an electric motor and a gear reduction unit to reduce the saw blade\'s rotational speed while maintaining constant torque. This allows the HSS saw blade to feed at a constant rate with a very high chip load per tooth.

MACHINERY AND EQUIPMENT FOR SALE


10 Items

Set Descending Direction
  1. Used

    12" Used Dake Heavy Duty Semi Automatic Cold Saw, Mdl. MEP 350X Tiger, Automatic/Manual Air Vise, MEP Control, 350mm Blade, #A7049

    Used Dake Heavy Duty Semi Automatic Cold Saw
    $8,750.00

    Finance as low as

    207.38 Per Mo.*
    Stock No: #A7049 Manufacturer: DAKE Model: MEP 350X Tiger Capacity: 12"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: Used
    Used Dake Heavy Duty Semi Automatic Cold Saw

  2. Used

    14-1/2" Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Year (2010) #A5696

  1. New

    10" Brand New Dake Technics Manual Cold Saw , Mdl. Technics 250, Head Rotates 45 Degrees Right & Left of Center for Mitering, Dependable Oversized Spindle & Gear Assembly with Steel Spindle & Bronze Gear, Coolant Pump with Flow Control Adjustment, Vise with Cam Lock Device, Ball Bearing Support of Hardened & Ground Spindle Shaft, 24V at Controls, Emergency Stop, Low Voltage Protection, Thermal Overload Protection, Blade, Gallon of Coolant, Adjustable Positive Stop, Tool Kit, Pedestal Base, #SMTechnics250

    Brand New Dake Technics Manual Cold Saw
    $2,995.00
    Stock No: #SMTechnics250 Manufacturer: DAKE Model: TECHNICS 250 Capacity: 10"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Technics Manual Cold Saw Brand New Dake Technics Manual Cold Saw

  2. New

    12-1/2" Brand New Dake SuperTechnics Manual Cold Saw , Mdl. Super Technics 315, Head Rotates 45 Degrees Right & Left of Center for Mitering, Dependable Oversized Spindle & Gear Assembly with Steel Spindle & Bronze Gear, Coolant Pump with Flow Control Adjustment, Vise with Cam Lock Device, Ball Bearing Support of Hardened & Ground Spindle Shaft, 24V at Controls, Emergency Stop, Low Voltage Protection, Thermal Overload Protection, Blade, Gallon of Coolant, Adjustable Positive Stop, Tool Kit, Pedestal Base, #SMSuperTechnics315

    Brand New Dake SuperTechnics Manual Cold Saw
    $4,995.00

    Finance as low as

    118.38 Per Mo.*
    Stock No: #SMSuperTechnics315 Manufacturer: DAKE Model: SUPER TECHNICS 315 Capacity: 12-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake SuperTechnics Manual Cold Saw Brand New Dake SuperTechnics Manual Cold Saw

  3. New

    14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370S

    Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head)
    $19,575.00

    Finance as low as

    401.48 Per Mo.*
    Stock No: #SMEuromatic370S Manufacturer: DAKE Model: EUROMATIC 370S Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head) Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head)

  4. New

    14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head), Mdl. Euromatic 370S-L, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370SL

    Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head)
    $19,575.00

    Finance as low as

    401.48 Per Mo.*
    Stock No: #SMEuromatic370SL Manufacturer: DAKE Model: EUROMATIC 370S-L Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head) Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head)

  5. New

    14-1/2" Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370PP, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Head Rotates 45 Degrees Right of Center for Miter Cutting and Up to 90 Degrees Left of Center for Miter Cutting & Slotting, Instruction & Service Manual, Minimum 6" Remnant Drop Piece Size for Maximum Material Use, #SMEuromatic370PP

    Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head)
    $40,450.00

    Finance as low as

    829.63 Per Mo.*
    Stock No: #SMEuromatic370PP Manufacturer: DAKE Model: EUROMATIC 370PP Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head) Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head)

  6. New

    14-1/2" Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head) , Mdl. Euromatic 370PP-L, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Head Rotates 45 Degrees Right of Center for Miter Cutting and Up to 90 Degrees Left of Center for Miter Cutting & Slotting, Instruction & Service Manual, Minimum 6" Remnant Drop Piece Size for Maximum Material Use, #SMEuromatic370PPL

    Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head)
    $40,450.00

    Finance as low as

    829.63 Per Mo.*
    Stock No: #SMEuromatic370PPL Manufacturer: DAKE Model: EUROMATIC 370PP-L Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head) Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head)

  7. New

    14" Brand New Dake Super Technics Manual Cold Saw , Mdl. Super Technics 350CE, Head Rotates 45 Degrees Right & Left of Center for Mitering, Dependable Oversized Spindle & Gear Assembly with Steel Spindle & Bronze Gear, Coolant Pump with Flow Control Adjustment, Vise with Cam Lock Device, Ball Bearing Support of Hardened & Ground Spindle Shaft, 24V at Controls, Emergency Stop, Low Voltage Protection, Thermal Overload Protection, Blade, Gallon of Coolant, Adjustable Positive Stop, Tool Kit, Pedestal Base, 90 Degree Rotation for Slot Cutting Operations, #SMSuperTechnics350CE

    Brand New Dake Super Technics Manual Cold Saw
    $6,795.00

    Finance as low as

    161.04 Per Mo.*
    Stock No: #SMSuperTechnics350CE Manufacturer: DAKE Model: SUPER TECHNICS 350CE Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Super Technics Manual Cold Saw Brand New Dake Super Technics Manual Cold Saw

  8. New

    14" Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw , Mdl. Super Technics 350SA, Push Button or Foot Switch Activation, Shroud Enclosed Head Feed Cylinder with Sliding Cams, Ball Bearing Support of Hardened & Ground Spindle Shaft, Vise with Cam Lock Device, Adjustable Pneumatic Vise with Sliding Gib, Oversized Pedestal Base, Head Rotates 45 Degrees Right & 60 Degrees Left of Center, Removable Hardened, Serrated Vise Jaw Faces, Blade, Coolant, Saw Blade Selector Calculator, Tool Kit, Instruction & Service Manual, Adjustable Positive Stop, #SMSuperTechnics350SA

    Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw
    $10,500.00

    Finance as low as

    215.36 Per Mo.*
    Stock No: #SMSuperTechnics350SA Manufacturer: DAKE Model: SUPER TECHNICS 350SA Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw

10 Items

Set Descending Direction