These machines transfer the heat generated by cutting to the chips created by the saw blade. Therefore, the blade and material being cut remain cold, unlike an abrasive saw, which abrades the metal and creates a great deal of heat in the metal and cutting blade. Cold saws use either a solid high speed steel (HSS) or tungsten carbide-tipped, resharpenable circular saw blade. They are equipped with an electric motor and a gear reduction unit to reduce the saw blade\'s rotational speed while maintaining constant torque. This allows the HSS saw blade to feed at a constant rate with a very high chip load per tooth.

MACHINERY AND EQUIPMENT FOR SALE


85 Items

Set Descending Direction
  1. Used

    19" x 165" Used Jinpu Double Miter Semi-Auto Sliding Saw, Mdl. LJJ2AS-500x4200, #C5129

    Used Jinpu Double Miter Semi-Auto Sliding Saw
    $19,750.00

    Finance as low as

    405.07 Per Mo.*
    Stock No: #C5129 Manufacturer: Jinpu Capacity: 6" X 6"
    Category: Saws, Cold & Carbide (Chop Saw), Double Miter
    Condition: Used
    Used Jinpu Double Miter Semi-Auto Sliding Saw

  2. Used

    12-1/2" Used Scotchman Manual Circular Coldsaw, Mdl. CPO-315, Manual Vise, Coolant System, Slotting and Longitudinal Capabilies, Double Reduction Gearbox, #A3986 Parts machine only.

  3. Used

    12" Used Soco Semi-Automatic Miter Cold Saw, Mdl. MC275AC, Semi Automatic Operation, Auto Cutting Cycle, Automatic Clamping, Manual Feed, Coolant System, #A2748

  4. Used

    13 - 1/2" Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed, Mdl. CPO 350NFPKPD, 230 Volt, 3 Phase Only, 2 Speed Motor, Power Clamping, Powered Automatic Head Feed, Foot Pedal, #A6805

    Used Scotchman (NON-FERROUS, Circular Cold Saws)  (For Cutting Aluminum, Brass, Copper, Plastics) High Speed
    $7,500.00

    Finance as low as

    177.75 Per Mo.*
    Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed
    Stock No: #A6805 Manufacturer: Scotchman Model: CPO 350 NFPKPD Capacity: 13 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: Used
    Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed

  5. Used

    14-1/2" Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Year (2010) #A5696

  6. Used

    14" Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle 1/4" - 27". Great for Brass, Aluminum and other Soft Materials, Mdl. MC-350NFA, Please Select, Air Vise, Automatic Hitch Feed from 1/4" - 27", #A6013

  7. Used

    14" Used Brobo Circular Metal Cutting Coldsaw With Pneumatic Vises (Heavy Duty Steel Cutting Saw), Mdl. S350D, 2 Pneumatic Operating Vises, Stand, Coolant System, #A6870

  8. Used

    14" Used Soco Automatic Ferrous Cold Saw, Mdl. MC-350FA, Automatic Clamping, Automatic Feed, Automatic Cutting, Built In Precision Digital Readout, Coolant, #A3854

  9. Used

    26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydraulic Clamps, (1) Horizontal Hydraulic Clamp, One Shot Lube System, Coolant System, 16-20-25 V=m/min, Low Speeds Only! Second Speed Change Not Avail., #A4350

  1. New

    24" Brand New Scotchman (Non-Ferrous Extrusion Cutting) Semi Automatic Upcut Circular Cold Saw, Mdl. SUP-600NF, Precision Miter Upcut Non-ferrous Saw, Safety Hood With Safety Switch That Will Not Allow Saw To Run With Hood Open, Blade Door With Safety Interlock Switch, Dual Palm Controll, Adjustable Feed Rate on Saw Head, (2) Horizontal Pneumatic Clamps, (2) Vertical Pneumatic Clamps, Capable of Slotting, Moveable Back Fence For Larger Capacity, Coolant Tank With Mist Lubrication, One Gallon Concentrated Coolant, One 20" (500mm) Diameter, 120 Tooth Carbide Blade, One Blade Wrench, Air Hose, Base Designed As A Chip Collection With Two Chip Extraction Ports, Noise Level (DB 68), Adjustable Leveling Pads, (Scotchman) Warranty: Three Years On Parts, #SMSUP600NF

    Brand New Scotchman (Non-Ferrous Extrusion Cutting) Semi Automatic Upcut Circular Cold Saw
    $16,245.00

    Finance as low as

    333.18 Per Mo.*
    Stock No: #SMSUP600NF Manufacturer: Scotchman Model: SUP-600NF Capacity: -
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Scotchman (Non-Ferrous Extrusion Cutting) Semi Automatic Upcut Circular Cold Saw Brand New Scotchman (Non-Ferrous Extrusion Cutting) Semi Automatic Upcut Circular Cold Saw

  2. New

    2.36" x 2.36" Brand New Baileigh Tungsten Carbide Automatic Saw, Mdl. CS-70NC, 11" Blade, Heavy Duty Design, Fully Automatic Magazine Style Material Feed System, 19" In-Feed Table, User Friendly Touch Screen Control, Mist Coolant System, Automatic Feeding Vise, Heavy Containment System, Hydraulic Pivot System, 220V / 3-Phase, #SMCS70NC

    Brand New Baileigh Tungsten Carbide Automatic Saw
    Starting At:
    $128,494.00

    Finance as low as

    2,573.73 Per Mo.*
    Stock No: #SMCS70NC Manufacturer: Baileigh Model: CS-70NC Capacity: 2.36" x 2.36"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Tungsten Carbide Automatic Saw Brand New Baileigh Tungsten Carbide Automatic Saw

  3. New

    4.72" x 1.96" Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw , Mdl. CS-C485SA, Accepts up to 17" Blade, Semi-Automatic Operation, Dual Miter Swivel Head, Tool Gap Compensation Device, Automatic Blade Shut Off, Manual Back Gauge, Industrial Coolant System, Hydraulic Feeding System, Hydraulic Vise, Foot Pedal, 220V / 3-Phase, #SMCSC485SA

    Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw
    Starting At:
    $29,279.00

    Finance as low as

    600.51 Per Mo.*
    Stock No: #SMCSC485SA Manufacturer: Baileigh Model: CS-C485SA Capacity: 4.72" x 1.96"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw

  4. New

    6" x 2.375" Brand New Baileigh Heavy Duty Automatic Cold Saw , Mdl. CS-475AV, Non-Ferrous, Heavy Duty Column Feed, Automatic Work Piece Feeding, Clamping, & Cutting, High Speed Aluminum Saw, Chip Collection Device, Automatic Operation, Touch Screen Interface, Hydraulic Vise, Flood Coolant System, Safety Guard, 220V / 3-Phase, #SMCS475AV

    Brand New Baileigh Heavy Duty Automatic Cold Saw
    Starting At:
    $49,069.00

    Finance as low as

    1,006.41 Per Mo.*
    Stock No: #SMCS475AV Manufacturer: Baileigh Model: CS-475AV Capacity: 6" x 2.375"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Automatic Cold Saw Brand New Baileigh Heavy Duty Automatic Cold Saw

  5. New

    6" x 2.375" Brand New Baileigh Heavy Duty Automatic Cold Saw for Aluminum, Mdl. CS-400AV, Non-Ferrous, Control Panel, Heavy Duty Column Feed, Automatic Work Piece Feeding, Clamping, & Cutting, High Speed Aluminum Saw, Chip Collection Device, Automatic Operation, Blade Gap Compensation Device, Hydraulic Vise, Flood Coolant System, 220V / 3-Phase, #SMCS400AV

    Brand New Baileigh Heavy Duty Automatic Cold Saw for Aluminum
    Starting At:
    $42,016.00

    Finance as low as

    861.75 Per Mo.*
    Stock No: #SMCS400AV Manufacturer: Baileigh Model: CS-400AV Capacity: 6" x 2.375"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Automatic Cold Saw for Aluminum Brand New Baileigh Heavy Duty Automatic Cold Saw for Aluminum

  6. New

    7" x 4" Brand New Hydmech Automatic Vertical Column CNC Cold Saw, Mdl. C370-2CNC, Automatic Operation with Semi-Automatic Mode, Shuttle Features Automatic Multi-Indexing up to 40", Shuttle Feed Carriage Designed with Side Movement, Variable Speed from 15 - 150 RPM, Vertical Pneumatic Vise, Extended Jaws, Heavy Duty Sawing Head Movement Controlled by Electro Mechanic Cylinder, Flood Coolant with Electrical Coolant Pump, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Blade Drive Coupled Directly to Saw Head, Pneumatic Operating Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Ergonomically Positioned Control Panel with Emergency Stop, Programing Console, Digital Display for Machine Diagnostics & Cutting Parameters, Stores Up to 32 Jobs, One Blade Included, Replaceable Blade Brush, #SMC3702CNC

    Brand New Hydmech Automatic Vertical Column CNC Cold Saw
    Starting At:
    $57,900.00

    Finance as low as

    1,187.53 Per Mo.*
    Stock No: #SMC3702CNC Manufacturer: Hyd- Mech Model: C370-2CNC Capacity: 7" x 4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Automatic Vertical Column CNC Cold Saw Brand New Hydmech Automatic Vertical Column CNC Cold Saw

  7. New

    7" x 4" Brand New Hydmech Automatic CNC Vertical Column Cold Saw, Mdl. CNF400CNC, Automatic Operation, Automatic Multi-Indexing up to 40", Head Stroke Set from Control Panel, 2 Blade Speeds, Warning Indicator with Flashing Light, Pneumatic Vertical Vise, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Sawing Head Movement Controlled by Pneumatic Cylinder, 6 HP Saw Head Coupled Directly to Saw Head, Pneumatic Horizontal Operating Vise, Automatic Mist Lubrication During Cut, Enclosed Steel Base Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel with Emergency Stop, Programing Console, Digital Display for Machine Diagnostics & Cutting Parameters, Stores Up to 32 Jobs, #SMCNF400CNC

    Brand New Hydmech Automatic CNC Vertical Column Cold Saw
    Starting At:
    $51,900.00

    Finance as low as

    1,064.47 Per Mo.*
    Stock No: #SMCNF400CNC Manufacturer: Hyd- Mech Model: CNF400CNC Capacity: 7" x 4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Automatic CNC Vertical Column Cold Saw Brand New Hydmech Automatic CNC Vertical Column Cold Saw Brand New Hydmech Automatic CNC Vertical Column Cold Saw

  8. New

    10 - 3/4" New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 SSPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, 45 Degrees Right, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275SSPK

    New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $7,760.00

    Finance as low as

    183.91 Per Mo.*
    Stock No: #SMCPO275SSPK Manufacturer: Scotchman Model: CPO 275 SSPK Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  9. New

    10 - 3/4" New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 SS, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, 45 Degrees Right, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275SS

    New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $6,695.00

    Finance as low as

    158.67 Per Mo.*
    Stock No: #SMCPO275SS Manufacturer: Scotchman Model: CPO 275 SS Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  10. New

    10 - 3/4" New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 LTPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275LTPKPD

    New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $10,060.00

    Finance as low as

    206.33 Per Mo.*
    Stock No: #SMCPO275LTPKPD Manufacturer: Scotchman Model: CPO 275 LTPKPD Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  11. New

    10 - 3/4" New Scotchman (HIGH TURN SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 HTPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, 45 Degrees Right, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275HTPKPD

    New Scotchman (HIGH TURN SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $10,060.00

    Finance as low as

    206.33 Per Mo.*
    Stock No: #SMCPO275HTPKPD Manufacturer: Scotchman Model: CPO 275 HTPKPD Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (HIGH TURN SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (HIGH TURN SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  12. New

    10 - 3/4" New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 LT, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, 45 Degrees Right, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275LT

    New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $6,660.00

    Finance as low as

    157.84 Per Mo.*
    Stock No: #SMCPO275LT Manufacturer: Scotchman Model: CPO 275 LT Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  13. New

    10 - 3/4" New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 HT, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, 45 Degrees Right, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275HT

    New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    $6,660.00

    Finance as low as

    157.84 Per Mo.*
    Stock No: #SMCPO275HT Manufacturer: Scotchman Model: CPO 275 HT Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  14. New

    10 - 3/4" New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 HTPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, 45 Degrees Right, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275HTPK

    New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $7,560.00

    Finance as low as

    179.17 Per Mo.*
    Stock No: #SMCPO275HTPK Manufacturer: Scotchman Model: CPO 275 HTPK Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  15. New

    10 - 3/4" New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 275 LTPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities, 135, Degrees, 90 Degrees Left and, 45 Degrees Right, Capable of Slotting, Two Cutting Speeds, Hardened And Ground Worn And Wheel Gear Box, Worn Wheel Of Top Quality Bronze, (Scotchman) Warranty: Three Years On Parts, #SMCPO275LTPK

    New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $7,560.00

    Finance as low as

    179.17 Per Mo.*
    Stock No: #SMCPO275LTPK Manufacturer: Scotchman Model: CPO 275 LTPK Capacity: 10 - 3/4"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  16. New

    10" Brand New Baileigh Manually Operated Cold Saw, Mdl. CS-250EU, 10" Blade, Manual Feed, Miters up to 45┬░ Left & Right, Fully Cast Iron Head, Flood Coolant System, Self Contained Coolant Tray, Vise with Cam Lock Device, #SMCS250EU

    Brand New Baileigh Manually Operated Cold Saw
    Starting At:
    $2,679.00
    Stock No: #SMCS250EU Manufacturer: Baileigh Model: CS-250EU Capacity: 10"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Manually Operated Cold Saw Brand New Baileigh Manually Operated Cold Saw

  17. New

    9" Brand New Hydmech Manual Circular Cold Saw (Ferrous), Mdl. P225, Manually Operated, Manual Vise, Robust Sawing Head Miters 45 Degrees Left, Bench Top Model - No Base, Single Blade Speed of 1 HP, Material Work Stop Rod for Multiple Cuts of Same Length, Flood Coolant with Membrane Pump, One Blade Included, #SMP225

    Brand New Hydmech Manual Circular Cold Saw (Ferrous)
    Starting At:
    $2,100.00
    Stock No: #SMP225 Manufacturer: Hyd- Mech Model: P225 Capacity: 10"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Manual Circular Cold Saw (Ferrous) Brand New Hydmech Manual Circular Cold Saw (Ferrous)

  18. New

    10" Brand New Dake Technics Manual Cold Saw , Mdl. Technics 250, Head Rotates 45 Degrees Right & Left of Center for Mitering, Dependable Oversized Spindle & Gear Assembly with Steel Spindle & Bronze Gear, Coolant Pump with Flow Control Adjustment, Vise with Cam Lock Device, Ball Bearing Support of Hardened & Ground Spindle Shaft, 24V at Controls, Emergency Stop, Low Voltage Protection, Thermal Overload Protection, Blade, Gallon of Coolant, Adjustable Positive Stop, Tool Kit, Pedestal Base, #SMTechnics250

    Brand New Dake Technics Manual Cold Saw
    $2,995.00
    Stock No: #SMTechnics250 Manufacturer: DAKE Model: TECHNICS 250 Capacity: 10"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Technics Manual Cold Saw Brand New Dake Technics Manual Cold Saw

  19. New

    11" Brand New DoALL "Continental Series" Fully Automatic Circular Coldsaw, Mdl. SC-75A, PLC Control for Electric & Hydraulic Functions, Easy Conversational HMI, Infinity Variable Blade Speed Controlled by Inverter, Hydraulic Front & Vertical Vises, Floating Shuttle Device, Hydraulic Sorting Chute, Electro-Magnetic Powered Brake, Automatic Chip Conveyor, Power Wire Brush, Air Blow Device for Tube Cutting, Automatic Loading Table for Round Bar, Cutting Mist Oil - 5 Gallons, Automatic Chip Conveyor (Chain Type), Air Compressed Oil Mist, Feed System: Servo Motor & Ball Screw, One Set of Tools in a Tool Box, Work Light, Instruction & Parts Manuals on CD, #SMSC75A

    Brand New DoALL "Continental Series" Fully Automatic Circular Coldsaw
    Starting At:
    $119,400.00

    Finance as low as

    2,391.58 Per Mo.*
    Stock No: #SMSC75A Manufacturer: DoAll Model: SC-75A Capacity: 11"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New DoALL Brand New DoALL

  20. New

    12 - 1/2" New Scotchman (NON-FERROUS, CNC) Circular Cold Saw, (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 RFA/NF, 5 H.P. Variable RPM Speed Control (Ferrous Model), 3.8 H.P. - 3,000 RPM (Non-ferrous Model), Automatic Tube Ejection, Clamping Both Sides of Blade - Highest Quality, Burr-Free Cuts, Interlocking Safety Hood, Blade Guides for Accurate Tolerances (Ferrous, (Scotchman) Warranty: Three Years On Parts, #SMCPO315RFASTNF

    New Scotchman (NON-FERROUS, CNC) Circular Cold Saw, (For Cutting Aluminum, Brass, Copper, Plastics)
    $40,795.00

    Finance as low as

    836.71 Per Mo.*
    Stock No: #SMCPO315RFASTNF Manufacturer: Scotchman Model: CPO 315 RFA/NF Capacity: 12 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (NON-FERROUS, CNC) Circular Cold Saw, (For Cutting Aluminum, Brass, Copper, Plastics) New Scotchman (NON-FERROUS, CNC) Circular Cold Saw, (For Cutting Aluminum, Brass, Copper, Plastics)

  21. New

    12 - 1/2" New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw, Ideal for HIGH VOLUME JOBS WITH A MAGAZINE FEED (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 RFA/ST, Automatic Tube Ejection, Clamping Both Sides of Blade - Highest Quality, Burr-Free Cuts, Interlocking Safety Hood, Blade Guides for Accurate Tolerances (Ferrous, (Scotchman) Warranty: Three Years On Parts, #SMCPO315RFAST

    New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw, Ideal for HIGH VOLUME JOBS WITH A MAGAZINE FEED (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    $65,290.00

    Finance as low as

    1,339.10 Per Mo.*
    Stock No: #SMCPO315RFAST Manufacturer: Scotchman Model: CPO 315 RFA/ST Capacity: 12 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw, Ideal for HIGH VOLUME JOBS WITH A MAGAZINE FEED (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw, Ideal for HIGH VOLUME JOBS WITH A MAGAZINE FEED (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  22. New

    12-1/2" Brand New Dake SuperTechnics Manual Cold Saw , Mdl. Super Technics 315, Head Rotates 45 Degrees Right & Left of Center for Mitering, Dependable Oversized Spindle & Gear Assembly with Steel Spindle & Bronze Gear, Coolant Pump with Flow Control Adjustment, Vise with Cam Lock Device, Ball Bearing Support of Hardened & Ground Spindle Shaft, 24V at Controls, Emergency Stop, Low Voltage Protection, Thermal Overload Protection, Blade, Gallon of Coolant, Adjustable Positive Stop, Tool Kit, Pedestal Base, #SMSuperTechnics315

    Brand New Dake SuperTechnics Manual Cold Saw
    $4,995.00

    Finance as low as

    118.38 Per Mo.*
    Stock No: #SMSuperTechnics315 Manufacturer: DAKE Model: SUPER TECHNICS 315 Capacity: 12-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake SuperTechnics Manual Cold Saw Brand New Dake SuperTechnics Manual Cold Saw

  23. New

    12 - 1/2" New Scotchman (NON-FERROUS, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 HFA NF, Hitch Feed Automatic, Fully Automatic Cycle, Push Button Controls Actuate The Complete Cycle, (Scotchman) Warranty: Three Years On Parts, #SMCPO315HFANF

    New Scotchman (NON-FERROUS, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)
    $31,345.00

    Finance as low as

    642.89 Per Mo.*
    Stock No: #SMCPO315HFANF Manufacturer: Scotchman Model: CPO 315 HFA NF Capacity: 12 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (NON-FERROUS, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics) New Scotchman (NON-FERROUS, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)

  24. New

    12 - 1/2" Brand New Scotchman Non-Ferrous Hitch Feed Automatic Touch Screen Coldsaw, Mdl. CPO 315 HFA/NF-CNC, Fully Automatic Cylce, Touch Screen Controls, 5 HP Variable RPM Speed Control (Ferrous Model), Interlocking Safety Hood, Clamping both Sides of Blade--Highest Quality, Burr-Free Cuts, Blade Guides for Accurate Tolerances (Ferrous Model), Mist Coolant, Adjustable Stroke Control on the Saw Head, Adjustable Down Feed Control on the Saw Head for Feed Rate, Fast Length Setup, No Wrenches required to Set Length, Adjustable Indexing Feed Speeds, Program up to Four Separate Cut Lengths in each Job, 100 Program Job Storage, 30" Shuttle Length, Unlimited Shuttles, Piece Counter, One Saw Blade, One Gallon Coolant (Non-ferrous Model), Warranty: Two Years on Parts, #SMCPO315HFANFCNC

    Brand New Scotchman Non-Ferrous Hitch Feed Automatic Touch Screen Coldsaw
    $39,345.00

    Finance as low as

    806.97 Per Mo.*
    Stock No: #SMCPO315HFANFCNC Manufacturer: Scotchman Model: CPO 315 HFA/NF-CNC Capacity: 12 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Scotchman Non-Ferrous Hitch Feed Automatic Touch Screen Coldsaw Brand New Scotchman Non-Ferrous Hitch Feed Automatic Touch Screen Coldsaw

  25. New

    12" New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 HFA, Fully Automatic Cycle, Push Button Controls Actuate The Complete Cycle, Interlocking Safety Hood, Clamping Both Sides Ff Blade - Highest Quality, Burr-Free Cut, (Scotchman) Warranty: Three Years On Parts, #SMCPO315HFA

    New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    $29,645.00

    Finance as low as

    608.02 Per Mo.*
    Stock No: #SMCPO315HFA Manufacturer: Scotchman Model: CPO 315 HFA Capacity: 12 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  26. New

    12-1/2" Brand New Baileigh European Style Manually Operated Cold Saw, Mdl. CS-315EU, 12.5" Blade, Heavy Duty Steel Base, Thick Cast Iron Base, Direct Drive Gear Box, Miters up to 45┬░ Left & Right, Coolant Pump, Taper Lock Vise, #SMCS315EU

    Brand New Baileigh European Style Manually Operated Cold Saw
    Starting At:
    $3,225.00
    Stock No: #SMCS315EU Manufacturer: Baileigh Model: CS-315EU Capacity: 12-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh European Style Manually Operated Cold Saw Brand New Baileigh European Style Manually Operated Cold Saw

  27. New

    12" Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. D300, Quick Acting Manual Vise, Double Hinged Safety Guards, Recirculating Coolant System (Reservoir In Base), Overload Protection Switch, Saw Blade, Robust Gear Box, #SMD300

    Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $5,850.00

    Finance as low as

    138.65 Per Mo.*
    Stock No: #SMD300 Manufacturer: Doringer Model: D300 Capacity: 12"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  28. New

    13 - 1/2" New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NFPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NFPKPD

    New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics)
    $12,160.00

    Finance as low as

    249.40 Per Mo.*
    Stock No: #SMCPO350NFPKPD Manufacturer: Scotchman Model: CPO 350 NFPKPD Capacity: 13 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics) New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics)

  29. New

    13 - 1/2" New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NFPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NFPK

    New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)
    $9,860.00

    Finance as low as

    233.68 Per Mo.*
    Stock No: #SMCPO350NFPK Manufacturer: Scotchman Model: CPO 350 NFPK Capacity: 13 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics) New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)

  30. New

    13 - 1/2" New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NF, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NF

    New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)
    Starting At:
    $9,260.00

    Finance as low as

    219.46 Per Mo.*
    Stock No: #SMCPO350NF Manufacturer: Scotchman Model: CPO 350 NF Capacity: 13 - 1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics) New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)

  31. New

    11" Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw, Mdl. CS-275SA, 11" Blade, Semi-Automatic Operation, Miters Up to 45┬░ Left & Right, Self Centering Vise, Heavy Duty Cast Iron Head, Backlash Adjustment, #SMCS275SA

    Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw
    Starting At:
    $8,179.00

    Finance as low as

    193.84 Per Mo.*
    Stock No: #SMCS275SA Manufacturer: Baileigh Model: CS-275SA Capacity: 13”x18”
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw

  32. New

    11" Brand New Baileigh Heavy Duty Manually Operated Cold Saw, Mdl. CS-275M, Cuts Ferrous & Non-Ferrous Metals, 11" Blade, Miters Both Ways, Stop Mechanism, Self Centering Vise, Direct Drive Head, #SMCS275M

    Brand New Baileigh Heavy Duty Manually Operated Cold Saw
    Starting At:
    $5,539.00

    Finance as low as

    131.27 Per Mo.*
    Stock No: #SMCS275M Manufacturer: Baileigh Model: CS-275M Capacity: 13”x18”
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Manually Operated Cold Saw Brand New Baileigh Heavy Duty Manually Operated Cold Saw

  33. New

    11" Brand New Baileigh Manually Operated Cold Saw, Mdl. CS-275EU, 11" Blade, Control Panel, Fully Cast Iron Head, Heavy Cast Base, Manual Feed, Miters up to 45┬░ Left & Right, Flood Coolant System, Material Stop Rod, Heavy Duty Vise, #SMCS275EU

    Brand New Baileigh Manually Operated Cold Saw
    Starting At:
    $2,919.00
    Stock No: #SMCS275EU Manufacturer: Baileigh Model: CS-275EU Capacity: 13”x18”
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Manually Operated Cold Saw Brand New Baileigh Manually Operated Cold Saw

  34. New

    14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370S

    Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head)
    $19,575.00

    Finance as low as

    401.48 Per Mo.*
    Stock No: #SMEuromatic370S Manufacturer: DAKE Model: EUROMATIC 370S Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head) Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head)

  35. New

    14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head), Mdl. Euromatic 370S-L, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370SL

    Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head)
    $19,575.00

    Finance as low as

    401.48 Per Mo.*
    Stock No: #SMEuromatic370SL Manufacturer: DAKE Model: EUROMATIC 370S-L Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head) Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head)

  36. New

    14-1/2" Brand New Hydmech Semi-Automatic Column Cold Saw (Ferrous Material) , Mdl. C370-2SI, Semi-Automatic Operation, Heavy Duty Gear Box, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Variable Speed from 15 - 150 RPM, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel includes Main Disconnect, Programmable Sawing Stroke, Saw Head Feed Rate Control, LED Display for Machine Diagnostics, Adjustable Material Stop with Ruler, Flood Coolant with Electrical Coolant Pump, One Blade Included, #SMC3702SI

    Brand New Hydmech Semi-Automatic Column Cold Saw (Ferrous Material)
    Starting At:
    $25,900.00

    Finance as low as

    531.21 Per Mo.*
    Stock No: #SMC3702SI Manufacturer: Hyd- Mech Model: C370-2SI Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Semi-Automatic Column Cold Saw (Ferrous Material) Brand New Hydmech Semi-Automatic Column Cold Saw (Ferrous Material) Brand New Hydmech Semi-Automatic Column Cold Saw (Ferrous Material)

  37. New

    14-1/2" Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370PP, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Head Rotates 45 Degrees Right of Center for Miter Cutting and Up to 90 Degrees Left of Center for Miter Cutting & Slotting, Instruction & Service Manual, Minimum 6" Remnant Drop Piece Size for Maximum Material Use, #SMEuromatic370PP

    Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head)
    $40,450.00

    Finance as low as

    829.63 Per Mo.*
    Stock No: #SMEuromatic370PP Manufacturer: DAKE Model: EUROMATIC 370PP Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head) Brand New Dake Euromatic Automatic Cold Saw (Ferrous Head)

  38. New

    14-1/2" Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head) , Mdl. Euromatic 370PP-L, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Head Rotates 45 Degrees Right of Center for Miter Cutting and Up to 90 Degrees Left of Center for Miter Cutting & Slotting, Instruction & Service Manual, Minimum 6" Remnant Drop Piece Size for Maximum Material Use, #SMEuromatic370PPL

    Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head)
    $40,450.00

    Finance as low as

    829.63 Per Mo.*
    Stock No: #SMEuromatic370PPL Manufacturer: DAKE Model: EUROMATIC 370PP-L Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head) Brand New Dake Euromatic Automatic Cold Saw (Non-Ferrous Head)

  39. New

    14" New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 LTPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable of Slotting, Two (2) Speed Control, Hardened And Ground Worn And Wheel Gear Box, (Scotchman) Warranty: Three Years On Parts, #SMCPO350LTPKPD

    New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $11,060.00

    Finance as low as

    226.84 Per Mo.*
    Stock No: #SMCPO350LTPKPD Manufacturer: Scotchman Model: CPO 350 LTPKPD Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  40. New

    14" Brand New Acra Manual (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. FHC 370T, Coolant, Adjustable Stop, Rotary Brush, Safety Guard, Tool Vise, #SMFHC370T

    Brand New Acra Manual (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    $6,215.00

    Finance as low as

    147.30 Per Mo.*
    Stock No: #SMFHC370T Manufacturer: Acra Model: FHC 370T Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Acra Manual (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) Brand New Acra Manual (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  41. New

    14" Brand New DoALL Fully Automatic Circular Coldsaw, Mdl. SC-100A, PLC Control for Electric & Hydraulic Functions, Easy Conversational HMI, Infinity Variable Blade Speed Controlled by Inverter, Hydraulic Front & Vertical Vises, Floating Shuttle Device, Hydraulic Sorting Chute, Electro-Magnetic Powered Brake, Automatic Chip Conveyor, Power Wire Brush, Air Blow Device for Tube Cutting, Automatic Loading Table for Round Bar, Cutting Mist Oil - 5 Gallons, Work Light, Air Compressed Oil Mist, Feed System: Servo Motor & Ball Screw, One Set of Tools in a Tool Box, Instruction & Parts Manuals on CD, #SMSC100A

    Brand New DoALL Fully Automatic Circular Coldsaw
    Starting At:
    $155,300.00

    Finance as low as

    3,110.66 Per Mo.*
    Stock No: #SMSC100A Manufacturer: DoAll Model: SC-100A Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New DoALL Fully Automatic Circular Coldsaw Brand New DoALL Fully Automatic Circular Coldsaw

  42. New

    14" New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 VSPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350VSPK

    New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    $10,160.00

    Finance as low as

    208.38 Per Mo.*
    Stock No: #SMCPO350VSPK Manufacturer: Scotchman Model: CPO 350 VSPK Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  43. New

    14" New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 SSPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350SSPK

    New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    $8,560.00

    Finance as low as

    202.87 Per Mo.*
    Stock No: #SMCPO350SSPK Manufacturer: Scotchman Model: CPO 350 SSPK Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  44. New

    14" Brand New Dake Super Technics Manual Cold Saw , Mdl. Super Technics 350CE, Head Rotates 45 Degrees Right & Left of Center for Mitering, Dependable Oversized Spindle & Gear Assembly with Steel Spindle & Bronze Gear, Coolant Pump with Flow Control Adjustment, Vise with Cam Lock Device, Ball Bearing Support of Hardened & Ground Spindle Shaft, 24V at Controls, Emergency Stop, Low Voltage Protection, Thermal Overload Protection, Blade, Gallon of Coolant, Adjustable Positive Stop, Tool Kit, Pedestal Base, 90 Degree Rotation for Slot Cutting Operations, #SMSuperTechnics350CE

    Brand New Dake Super Technics Manual Cold Saw
    $6,795.00

    Finance as low as

    161.04 Per Mo.*
    Stock No: #SMSuperTechnics350CE Manufacturer: DAKE Model: SUPER TECHNICS 350CE Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Super Technics Manual Cold Saw Brand New Dake Super Technics Manual Cold Saw

  45. New

    14" Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw , Mdl. Super Technics 350SA, Push Button or Foot Switch Activation, Shroud Enclosed Head Feed Cylinder with Sliding Cams, Ball Bearing Support of Hardened & Ground Spindle Shaft, Vise with Cam Lock Device, Adjustable Pneumatic Vise with Sliding Gib, Oversized Pedestal Base, Head Rotates 45 Degrees Right & 60 Degrees Left of Center, Removable Hardened, Serrated Vise Jaw Faces, Blade, Coolant, Saw Blade Selector Calculator, Tool Kit, Instruction & Service Manual, Adjustable Positive Stop, #SMSuperTechnics350SA

    Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw
    $10,500.00

    Finance as low as

    215.36 Per Mo.*
    Stock No: #SMSuperTechnics350SA Manufacturer: DAKE Model: SUPER TECHNICS 350SA Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw Brand New Dake Super Technics 3 Speed Semi-Automatic Cold Saw

  46. New

    14" Brand New Scotchman (VARIABLE SPEED, MANUAL CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 VS, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350VS

    Brand New Scotchman (VARIABLE SPEED, MANUAL CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $9,260.00

    Finance as low as

    219.46 Per Mo.*
    Stock No: #SMCPO350VS Manufacturer: Scotchman Model: CPO 350 VS Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Scotchman (VARIABLE SPEED, MANUAL CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) Brand New Scotchman (VARIABLE SPEED, MANUAL CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  47. New

    14" New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 SS, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350SS

    New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $7,660.00

    Finance as low as

    181.54 Per Mo.*
    Stock No: #SMCPO350SS Manufacturer: Scotchman Model: CPO 350 SS Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  48. New

    14" New Scotchman (HIGH TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 HTPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350HTPKPD

    New Scotchman (HIGH TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $11,060.00

    Finance as low as

    226.84 Per Mo.*
    Stock No: #SMCPO350HTPKPD Manufacturer: Scotchman Model: CPO 350 HTPKPD Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (HIGH TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (HIGH TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  49. New

    14" New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 SSPKPD, Powered Vise, Powered Down Feed, Double Self Centering Vise, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable of Slotting, (Scotchman) Warranty: Three Years On Parts, #SMCPO350SSPKPD

    New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $11,210.00

    Finance as low as

    229.92 Per Mo.*
    Stock No: #SMCPO350SSPKPD Manufacturer: Scotchman Model: CPO 350 SSPKPD Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  50. New

    14" New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 HTPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, Wheel Gear Box, (Scotchman) Warranty: Three Years On Parts, #SMCPO350HTPK

    New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $8,560.00

    Finance as low as

    202.87 Per Mo.*
    Stock No: #SMCPO350HTPK Manufacturer: Scotchman Model: CPO 350 HTPK Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  51. New

    14" Brand New Doringer Semi-Automatic Circular Metal Cold Sawing Machine, Mdl. D-350SA, Air Over Hydraulic Infinitely Adjustable Saw Head Power Down Feed, Double Pneumatic Vicing System, Thermal Overload Protection Switch, Recirculating Coolant System, Cabinet Base Stand, 2-Speed Motor with Pole Changing Switch Mounted, Double Hinged Safety Guards, One Gallon Doringer H-32 Coolant Concentrate, Miter Capacity of 45 Degrees - 0 Degrees - 45 Degrees, Set of Allen Wrenches, Grease Gun, Operator Manual & Parts List, #SMD350SA

    Brand New Doringer Semi-Automatic Circular Metal Cold Sawing Machine
    Starting At:
    $18,850.00

    Finance as low as

    386.61 Per Mo.*
    Stock No: #SMD350SA Manufacturer: Doringer Model: D-350SA Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Doringer Semi-Automatic Circular Metal Cold Sawing Machine Brand New Doringer Semi-Automatic Circular Metal Cold Sawing Machine Brand New Doringer Semi-Automatic Circular Metal Cold Sawing Machine

  52. New

    14" Brand Scotchman (POWER CLAMPING, POWERED DOWN FEED. AND VARIABLE SPEED 11-177 RPM), Mdl. CPO 350 PKPDVS, Miter Capabilities 45 degrees Left and 45 degrees Right, Semi-Automatic Cycle, Air Operated Power Double Self-Centering Vise Assures Burr-Free Cuts, Pneumatic Power Down Feed with Electric Controls, Miter Locking Devise: Quick, Accurate Setting-Stops at 45 degrees Left, Straight 90 Degrees, and 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened and Ground Worm and Wheel Gear Box, Worm Wheel of Top Quality Bronze, Chip Drawer, Warranty: Three Years on Parts, Made In The USA!, #SMCPO350PKPDVS

    Brand Scotchman (POWER CLAMPING, POWERED DOWN FEED. AND VARIABLE SPEED 11-177 RPM)
    $12,660.00

    Finance as low as

    259.66 Per Mo.*
    Stock No: #SMCPO350PKPDVS Manufacturer: Scotchman Model: CPO 350 PKPDVS Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand Scotchman (POWER CLAMPING, POWERED DOWN FEED. AND VARIABLE SPEED 11-177 RPM) Brand Scotchman (POWER CLAMPING, POWERED DOWN FEED. AND VARIABLE SPEED 11-177 RPM)

  53. New

    14" New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 LTPK, Made in the U.S.A, Coolant Tank and Pump, (Scotchman) Warranty: Three Years On Parts, #SMCPO350LTPK

    New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $8,710.00

    Finance as low as

    206.43 Per Mo.*
    Stock No: #SMCPO350LTPK Manufacturer: Scotchman Model: CPO 350 LTPK Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    In Stock New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  54. New

    14" New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 HT, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, Wheel Gear Box, (Scotchman) Warranty: Three Years On Parts, #SMCPO350HT

    New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $7,660.00

    Finance as low as

    181.54 Per Mo.*
    Stock No: #SMCPO350HT Manufacturer: Scotchman Model: CPO 350 HT Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  55. New

    14" Brand New Jet Industrial "Ferrous" Manual Cold Saw (For Cutting Ferrous Metals), Mdl. J-FK350-2K, 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys., Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety, Quick tension and release mitering capabilities with stops at 45° right, 45° left, and 90° (center), capable of slotting, Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards, Hardened and ground worm screw and wheel drive gear box operates in an oil bath for added durability, Double self centering vise with adjustable gibs secures the material for burr free cuts, Heavy-Duty cast iron frame base with easy access storage provides a stable cuting platform, Thermal overload protection with magnetic starter for increased electrical safety, 30" adjustable length material stop, Made In Korea, #SMJFK3502K

    Brand New Jet Industrial "Ferrous" Manual Cold Saw (For Cutting Ferrous Metals)
    $7,229.00

    Finance as low as

    171.33 Per Mo.*
    Brand New Jet Industrial
    Stock No: #SMJFK3502K Manufacturer: Jet Model: J-FK350-2K Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    In Stock Brand New Jet Industrial Brand New Jet Industrial Brand New Jet Industrial

  56. New

    14" New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 LT, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Made in the U.S.A, (Scotchman) Warranty: Three Years On Parts, #SMCPO350LT

    New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $7,660.00

    Finance as low as

    181.54 Per Mo.*
    New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Stock No: #SMCPO350LT Manufacturer: Scotchman Model: CPO 350 LT Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  57. New

    14" Brand New Baileigh Heavy Duty Manually Operated Cold Saw, Mdl. CS-350M, 14" Blade, Manual Feed, Miters Up to 45┬░ Left & Right, Self Centering Vise, External Back Lash Adjustment, Flood Coolant System, #SMCS350M

    Brand New Baileigh Heavy Duty Manually Operated Cold Saw
    Starting At:
    $8,699.00

    Finance as low as

    206.17 Per Mo.*
    Stock No: #SMCS350M Manufacturer: Baileigh Model: CS-350M Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Manually Operated Cold Saw Brand New Baileigh Heavy Duty Manually Operated Cold Saw Brand New Baileigh Heavy Duty Manually Operated Cold Saw

  58. New

    14" Brand New Hydmech Automatic CNC Non-Ferrous Pivot Arm Cold Saw, Mdl. PNF350-2CNC, Semi-Automatic & Automatic Operation, Automatic Multi-Indexing with Automatic Kerf Compensation, Pneumatic Operating Saw Head Feed, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Rotating Table Mounted on Large Roller Bearing, 2 Pneumatic Operating Vises, Blade Drive Coupled Directly to Saw Head, Cutting Area Behind Protective Cover, Ergonomically Positioned CP Mounted on Articulating Arm, 1 Carbide Tipped Blade, #SMPNF3502CNC

    Brand New Hydmech Automatic CNC Non-Ferrous Pivot Arm Cold Saw
    Starting At:
    $27,900.00

    Finance as low as

    572.23 Per Mo.*
    Stock No: #SMPNF3502CNC Manufacturer: Hyd- Mech Model: PNF350-2CNC Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Automatic CNC Non-Ferrous Pivot Arm Cold Saw Brand New Hydmech Automatic CNC Non-Ferrous Pivot Arm Cold Saw Brand New Hydmech Automatic CNC Non-Ferrous Pivot Arm Cold Saw

  59. New

    14" Brand New Hydmech Manual (Non-Ferrous) Pivot Arm Cold Saw, Mdl. PFF350-2AV, Manual Saw Head Movement, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Rotating Table on Large Roller Bearings, 2 Pneumatic Operating Vises, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Blade Drive Coupled Directly to Saw Head, Safety Head Locking Device, Automatic Coolant Lubrication Activates During Cut, 1 Carbide Tipped Blade, #SMPNF3502AV

    Brand New Hydmech Manual (Non-Ferrous) Pivot Arm Cold Saw
    Starting At:
    $9,000.00

    Finance as low as

    213.30 Per Mo.*
    Stock No: #SMPNF3502AV Manufacturer: Hyd- Mech Model: PFF350-2AV Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Manual (Non-Ferrous) Pivot Arm Cold Saw Brand New Hydmech Manual (Non-Ferrous) Pivot Arm Cold Saw Brand New Hydmech Manual (Non-Ferrous) Pivot Arm Cold Saw

  60. New

    14" Brand New Hydmch Manual Column Cold Saw, Mdl. C350-2AV, Manually Operated, Heavy Duty Sawing Head, Adjustable Dual Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, 4 Blade Speeds, Foot Pedal Control with Emergency Stop, Pneumatic Operating Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel, LED Display for Machine Diagnostics, Material Work Stop Rod, Flood Coolant with Electrical Coolant Pump, One Blade Included, #SMC3502AV

    Brand New Hydmch Manual Column Cold Saw
    Starting At:
    $9,000.00

    Finance as low as

    213.30 Per Mo.*
    Stock No: #SMC3502AV Manufacturer: Hyd- Mech Model: C350-2AV Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmch Manual Column Cold Saw Brand New Hydmch Manual Column Cold Saw

  61. New

    14" Brand New Hydmech Semi-Automatic Column Cold Saw, Mdl. C350-2S, Semi-Automatic Operation, Heavy Duty Sawing Head, Manual Movement on Adjustable Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, 4 Blade Speeds, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Pneumatic Horizontal Operating Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel includes Main Disconnect, Programmable Sawing Stroke, Saw Head Feed Rate Control, LED Display for Machine Diagnostics, Adjustable Material Stop with Ruler, Flood Coolant with Electrical Coolant Pump & Wash Down Hose, One Blade Included, #SMC3502S

    Brand New Hydmech Semi-Automatic Column Cold Saw
    Starting At:
    $19,500.00

    Finance as low as

    399.95 Per Mo.*
    Stock No: #SMC3502S Manufacturer: Hyd- Mech Model: C350-2S Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Semi-Automatic Column Cold Saw Brand New Hydmech Semi-Automatic Column Cold Saw

  62. New

    14" Brand New Hydmech Manual Pivot Arm Cold Saw, Mdl. P350, Manually Operated, Control Handle with Safety Spring Loaded Trigger, Saw Base, Vise Quick Clamp & Release Lever, Flood Coolant with Electrical Coolant Pump, 2 Blade Speeds, Movement of Head & Vise, Adjustable Manual Vise with Anti-Burr Clamp, Saw Head Miters 45 Degrees Left & 45 Degrees Right, Material Work Stop Rod for Multiple Cuts of Same Length, One Blade Included, #SMP350

    Brand New Hydmech Manual Pivot Arm Cold Saw
    Starting At:
    $7,900.00

    Finance as low as

    187.23 Per Mo.*
    Stock No: #SMP350 Manufacturer: Hyd- Mech Model: P350 Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Manual Pivot Arm Cold Saw Brand New Hydmech Manual Pivot Arm Cold Saw

  63. New

    14" Brand New MACC Manual Cold Saw (Ferrous Material), Mdl. MACC 350 EDV, Movable Head - 45 deg L/45 deg R, Reduction Unit in Oil Bath, Double Hinged Pin with Eccentric Brush, Double Quick Locking Vise, Coolant Filter, Power Driven Pump for Band Cooling, Jet Separation System to Keep Blade Oiled, Sliding Counter Vice for Longitudinal Cutting, Bar Stop, Bar Support Arm, Service Tools, Instruction Manual, #SMMACC350EDV

    Brand New MACC Manual Cold Saw (Ferrous Material)
    Starting At:
    $5,500.00

    Finance as low as

    130.35 Per Mo.*
    Brand New MACC Manual Cold Saw (Ferrous Material)
    Stock No: #SMMACC350EDV Manufacturer: MACC Model: MACC 350 EDV Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    In Stock Brand New MACC Manual Cold Saw (Ferrous Material) Brand New MACC Manual Cold Saw (Ferrous Material) Brand New MACC Manual Cold Saw (Ferrous Material)

  64. New

    14" Brand New Hydmech Semi-Automatic Circular Cold Saw, Mdl. PNF350-2S, Semi-Automatic Operation, Pneumatic Operating Saw Head & Vises, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Rotating Table Mounted on Roller Bearings, 2 Pneumatic Operating Devices, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Blade Drive Coupled to Saw Head, Cutting Area Behind Protective Cover, Automatic Coolant Lubrication Activates During Cut, 1 Carbide Tipped Blade, #SMPNF3502S

    Brand New Hydmech Semi-Automatic Non-Ferrous Pivot Arm Cold Saw
    Starting At:
    $15,900.00

    Finance as low as

    326.11 Per Mo.*
    Stock No: #SMPNF3502S Manufacturer: Hyd- Mech Model: PNF350-2S Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Semi-Automatic Non-Ferrous Pivot Arm Cold Saw Brand New Hydmech Semi-Automatic Non-Ferrous Pivot Arm Cold Saw

  65. New

    14" Brand New Hydmech Automatic Column Cold Saw, Mdl. C350-2CNC, Automatic Operation, Feed Rate Control Dial, Automatic Multi-Indexing Up to 23" in Single Stroke, Manual Movement on Adjustable Dual Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Variable Blade Speed of 15 to 90 RPM, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel Includes Main Disconnect, Programmable Sawing Stroke, Digital Display, Flood Coolant with Electrical Coolant Pump, Wash Down Hose, Stores up to 99 jobs, One Blade Included, #SMC3502CNC

    Brand New Hydmech Automatic Column Cold Saw
    Starting At:
    $32,200.00

    Finance as low as

    660.42 Per Mo.*
    Stock No: #SMC3502CNC Manufacturer: Hyd- Mech Model: C350-2CNC Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Hydmech Automatic Column Cold Saw Brand New Hydmech Automatic Column Cold Saw Brand New Hydmech Automatic Column Cold Saw

  66. New

    14" Brand New Baileigh Variable Speed Inverter Driven Cold Saw, Mdl. CS-350EU, 14" Blade, Variable Speed Inverter Driven, Digital Readout for RPM, Miters 45┬░ Left & Right, Taper Lock Vise, Direct Drive Gear Box, Steel Base, Coolant Pump, #SMCS350EU

    Brand New Baileigh Variable Speed Inverter Driven Cold Saw
    Starting At:
    $5,659.00

    Finance as low as

    134.12 Per Mo.*
    Stock No: #SMCS350EU Manufacturer: Baileigh Model: CS-350EU Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Variable Speed Inverter Driven Cold Saw Brand New Baileigh Variable Speed Inverter Driven Cold Saw Brand New Baileigh Variable Speed Inverter Driven Cold Saw

  67. New

    14" New Baileigh Abrasive Chop Saw, Mdl. AS-350M, Cast Base and Head, #SMAS350M

  68. New

    14" Brand New Baileigh Heavy Duty Manually Operated Cold Saw with Pneumatic Vise, Mdl. CS-350P, Pneumatic Centering Vise, Stop Mechanism, Heavy Cast Construction, Cuts Ferrous & Non-Ferrous Metals, External Back Lash Adjustment, Moveable Safety Guard, Foot Pedal, Flood Blade Cooling System, #SMCS350P

    Brand New Baileigh Heavy Duty Manually Operated Cold Saw with Pneumatic Vise
    Starting At:
    $9,359.00

    Finance as low as

    221.81 Per Mo.*
    Stock No: #SMCS350P Manufacturer: Baileigh Model: CS-350P Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Manually Operated Cold Saw with Pneumatic Vise Brand New Baileigh Heavy Duty Manually Operated Cold Saw with Pneumatic Vise

  69. New

    14" Brand New Baileigh Heavy Duty Manually Operated Aluminum Cutting Cold Saw , Mdl. CS-355M, Cuts Non-Ferrous Metals, Miters Left & Right, Centering Vise, Heavy Cast Construction, Stop Mechanism, Flood Coolant System, #SMCS355M

    Brand New Baileigh Heavy Duty Manually Operated Aluminum Cutting Cold Saw
    Starting At:
    $9,359.00

    Finance as low as

    221.81 Per Mo.*
    Stock No: #SMCS355M Manufacturer: Baileigh Model: CS-355M Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Manually Operated Aluminum Cutting Cold Saw Brand New Baileigh Heavy Duty Manually Operated Aluminum Cutting Cold Saw

  70. New

    14" Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw for Aluminum, Mdl. CS-355SA, Cuts Non-Ferrous Metals, Miters Left & Right, Centering Vise, Heavy Cast Construction, Stop Mechanism, Flood Coolant System, 220V / 3-Phase, Foot Pedal, #SMCS355SA

    Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw for Aluminum
    Starting At:
    $13,709.00

    Finance as low as

    281.17 Per Mo.*
    Stock No: #SMCS355SA Manufacturer: Baileigh Model: CS-355SA Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw for Aluminum Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw for Aluminum

  71. New

    14" Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw , Mdl. CS-350SA, Cuts Ferrous & Non-Ferrous Metals, 14" Blade, Pneumatic Centering Vise, Hydraulic Blade Descent, Automatic Shut Off & Vise Release, Stop Mechanism, Heavy Cast Construction, External Back Lash Adjustment, Foot Pedal, #SMCS350SA

    Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw
    Starting At:
    $13,709.00

    Finance as low as

    281.17 Per Mo.*
    Stock No: #SMCS350SA Manufacturer: Baileigh Model: CS-350SA Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw

  72. New

    14" Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw , Mdl. CS-C425SA, Accepts up to 17" Blade, Semi-Automatic Operation, Dual Miter Swivel Head, Tool Gap Compensation Device, Automatic Blade Shut Off, Manual Back Gauge, Industrial Coolant System, Material Stop, Foot Pedal, #SMCSC425SA

    Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw
    Starting At:
    $24,359.00

    Finance as low as

    499.60 Per Mo.*
    Stock No: #SMCSC425SA Manufacturer: Baileigh Model: CS-C425SA Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw

  73. New

    14" Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. D-350, 58/108 RPM, Quick Acting Manual Vise, Coolant System, Stand, Horsepower: 3, Overload Protection Switch, Saw Blade, #SMD350

    Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)
    Starting At:
    $9,250.00

    Finance as low as

    219.23 Per Mo.*
    Stock No: #SMD350 Manufacturer: Doringer Model: D-350 Capacity: 14"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics) Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)

  74. New

    20" Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw, Mdl. SUP-500 NF, Precision Miter Upcut Non-ferrous Saw, Safety Hood With Safety Switch That Will Not Allow Saw To Run With Hood Open, Blade Door With Safety Interlock Switch, Dual Palm Controll, Adjustable Feed Rate on Saw Head, (2) Horizontal Pneumatic Clamps, (2) Vertical Pneumatic Clamps, Capable Of Slotting, Moveable Back Fence For Larger Capacity, Coolant Tank With Mist Lubrication, One Gallon Concentrated Coolant, One 20" (500mm) Diameter, 120 Tooth Carbide Blade, One Blade Wrench, Air Hose, Base Designed As A Chip Collection With Two Chip Extraction Ports, Noise Level (DB 68), Adjustable Leveling Pads, (Scotchman) Warranty: Three Years On Parts, #SMSUP500NF

    Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw
    $14,145.00

    Finance as low as

    290.11 Per Mo.*
    Stock No: #SMSUP500NF Manufacturer: Scotchman Model: SUP-500 NF Capacity: 20"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw

  75. New

    26" Brand New Kalamazoo Wet Abrasive Chop Saw , Mdl. 31744, Great for Cutting: Pipe, Solids, Shapes & Channels Fast!, Magnetic Switch, CAM Vise, Cog Belt Drive, Threaded Manual Down Stop, Made In The USA!, #SMK26W

    Brand New Kalamazoo Wet Abrasive Chop Saw
    $19,500.00

    Finance as low as

    399.95 Per Mo.*
    Stock No: #SMK26W Manufacturer: Kalamazoo Model: K26W Capacity: 26"
    Category: Saws, Cold & Carbide (Chop Saw), Abrasive & Friction
    Condition: New
    Brand New Kalamazoo Wet Abrasive Chop Saw Brand New Kalamazoo Wet Abrasive Chop Saw

  76. New

    26" Brand New Kalamazoo DRY Abrasive Chop Saw, Mdl. K26S, Great for Cutting: Pipe, Solids, Shapes & Channels Fast!, Magnetic Switch, CAM Vise, Cog Belt Drive, Threaded Manual Down Stop, Made In The USA!, #SMK26S

    Brand New Kalamazoo DRY Abrasive Chop Saw
    $16,500.00

    Finance as low as

    338.42 Per Mo.*
    Stock No: #SMK26S Manufacturer: Kalamazoo Model: K26S Capacity: 26"
    Category: Saws, Cold & Carbide (Chop Saw), Abrasive & Friction
    Condition: New
    Brand New Kalamazoo DRY Abrasive Chop Saw Brand New Kalamazoo DRY Abrasive Chop Saw

85 Items

Set Descending Direction