Is the safest, and most expensive. They are generally slower and have more of a precise bend. Hydraulic Press Brakes have a better control when inching down and setting up for your bend, they also can return to the top at any time. Hydra-Mechanical Press Brakes Rotary hydraulic cylinder turns the eccentric shaft by means of rigid mechanical linkage to both ends of the ram, distributing power equally over its full length. This basic power principle offers the operational control and safety of the hydraulic principle plus the rigid ram alignment, accuracy and operating speeds of the mechanical press brakes. With a Hydra-Mechanical press brake design the operator is in full command of the job. He can meter out just the right amount of fluid to move the ram the exact distance needed. With a Hydra-mechanical press brake you can easily inch the ram down for scribed line work, and easily locate the stroke bottom for setting up. This gives more accuracy, less operating time, and less training is needed. The Hydra-mechanical advantage allows you to instantly stop or start anywhere in the cycle, and allow reversal of stroke direction at any position. Different from a mechanical press brake that can only return the ram to the top after the cycle is complete.

MACHINERY AND EQUIPMENT FOR SALE


4 Items

Set Descending Direction
  1. Used

    135 Ton x 10' Used Pacific Hydraulic Press Brake "American Made", Mdl. J135-10, Autogauge CNC 1000 Controller, Autogauge G24 Backgauge, Dual Foot Pedal with E-Stop, ProTech Eagle Eye Light Curtains, Note: Non Functional- Needs New PLC. Sold As-Is., #A5456 *Sold As-Is, No Warranty*

    Used Pacific Hydraulic Press Brake "American Made"
    $16,500.00

    Finance as low as

    338.42 Per Mo.*
    Used Pacific Hydraulic Press Brake
    Stock No: #A5456 Manufacturer: Pacific Model: J135-10 Capacity: 135 Ton x 10'
    Category: Brake Press, Hydraulic, Press Brake, Hydraulic
    Condition: Used
    Used Pacific Hydraulic Press Brake

  2. Used

    200 Ton x 8' Used Pacific Hydraulic Press Brake (Heavy Duty, ALL ABOVE GROUND- No Pit), Mdl. 200-8, Foot Pedal Control, Manual Backgauge, Single Foot Control, #A7068

    Used Pacific Hydraulic Press Brake (Heavy Duty, ALL ABOVE GROUND- No Pit)
    $26,500.00

    Finance as low as

    543.52 Per Mo.*
    Used Pacific Hydraulic Press Brake (Heavy Duty, ALL ABOVE GROUND- No Pit)
    Stock No: #A7068 Manufacturer: Pacific Model: 200-8 Capacity: 200 Ton x 8'
    Category: Brake Press, Hydraulic, CNC, Press Brake, Hydraulic, Cnc, Hydraulic & Mechanical
    Condition: Used
    Used Pacific Hydraulic Press Brake (Heavy Duty, ALL ABOVE GROUND- No Pit) Used Pacific Hydraulic Press Brake (Heavy Duty, ALL ABOVE GROUND- No Pit)

  3. Used

    300 Ton x 14' Used Pacific Heavy Duty Hydraulic Press Brake, Mdl. 300-14, Foot Pedal, #A4348

    Used Pacific Heavy Duty Hydraulic Press Brake
    $32,500.00

    Finance as low as

    666.58 Per Mo.*
    Used Pacific Heavy Duty Hydraulic Press Brake
    Stock No: #A4348 Manufacturer: Pacific Model: 300-14 Capacity: 300 Ton x 14'
    Category: Brake Press, Hydraulic, Press Brake, Hydraulic
    Condition: Used
    Used Pacific Heavy Duty Hydraulic Press Brake

  4. Used

    1,000 Ton x 22'/26' Used Pacific (Tandem) CNC Hydraulic Press Brake, Mdl. FK1000-26/22, Dual Palm Pedestal Control, TOOLING, DNC 80 CNC Controller, #CD5114

    Used Pacific (Tandem) CNC Hydraulic Press Brake
    Call for Price
    Stock No: #CD5114 Manufacturer: Pacific Model: FK1000-26/22 Capacity: 1,000 Ton x 22'/26'
    Category: Brake Press, Hydraulic, CNC, Press Brake, Cnc, Hydraulic & Mechanical
    Condition: Used
    Used Pacific (Tandem) CNC Hydraulic Press Brake

4 Items

Set Descending Direction