We're able to obtain brokers for Cross country and worldwide deliveries and only hire fully insured Flatbed Double Drops, Single Drops and Permitted Loads.
Make sure to get insurance, as this is not usually included. All machines come banded and strapped to a pallet unless instructed otherwise.
Crating is optional and comes at extra charge.
Loading docks or ramps are required! If you do not have one, inform the shipping company and there will more than likely be an extra charge.
20"/36" x 54" standard modern 2036-54, New #SM2036-54
Machine Type:
LATHES
Manufacturer:
Standard Modern
Model:
2036-54
Capacity:
20"/36" x 54"
Condition:
New
Stock No:
#SM2036-54
DETAILED SPECIFICATION
| Swing Over Bed & Saddle | 20" |
| Swing in Gap | 36" |
| Swing Over Cross Slide | 12" |
| Distance Between Centers (Closed) | 31" |
| Distance Between Centers (Open) | 54" |
| Bar Capacity | 3" |
| Headstock | |
| Spindle Speeds | 18 |
| Speed Range | 17 - 1000 RPM |
| Spindle Nose - Camlock | D1 - 8" |
| Spindle Hole | 3.06" |
| Spindle Center | #5 MT |
| Feedbox - Combination | |
| Feed & Thread Selections | 66 |
| Inch Feed Range | 0.0015" - 0.105" /rev. |
| Inch Thread Range | 2 to 127 TPI |
| Metric Feed Range | 0.04mm - 2.67mm /rev. |
| Metric Thread Range | 0.2mm to 14mm |
| Tailstock | |
| Quill Diameter | 2.94" |
| Quill Travel | 7" |
| Morse Taper with Tang | #5 MT |
| Offset | +/- 0.75" |
| Bed & Base | |
| Bed Width | 14" |
| Bed Depth | 12" |
| Bed Length | 52-1/2" |
| Base width | 30" |
| Base length | 78" |
| Apron | |
| Hand Wheel - 1 Revolution | 1" |
| Half Nuts | Double |
| High Speed Threading | to 800 RPM |
| Repeatability of Auto Carriage Stop | +/- 0.005" |
| Feed Torque Control | Variable |
| Carriage Cross Slide | |
| Carriage Length on Bed | 21" |
| Carriage Bridge Width | 10" |
| Cross Slide Length | 30-1/2" |
| Compound Travel | 5" |
| Direct Reading Dial Graduation | 0.001" |
| Warranty | 2 Year Limited Warranty |
| Horsepower | 7-1/2 H.P. |
| Voltage | 208 - 230/460V ~ 3 Phase |
| Dimensions (L x W x H) | 146" x 56" x 65" |
Features
7-1/2 H.P. Drive
18 Spindle Speeds 17 To 1000 RPM
D1-8" Camlock - 3 Bearing Spindle
Inch/Metric Feed Box
Super Rigid Bed & Base Structure
Lead Screw Reverse
Full Length Rear Splash Guard
10" Diameter Dog Plate
2 #5 MT Dead Centers
1 #5 MT Spindle Sleeve
Wrenches, Keys, Spare Shear Pins
Operation Manual
Standard 115V Electric Controls
All Hardened & Ground Gears - No Clutches
Feed Reverse
Bi-Directional Carriage Stop (Feeds & Threads)
One Shot Lubrication To Carriage & Cross Slide
Combination Inch-Metric Dials
Electric Brake
Spindle Nose 3-3/50"
OPTIONAL EQUIPMENT AND TOOLING
Name: Racer - 18" Toolmakers Face Plate
Price: Call For Price
Stock No:# RACER29
ADD TO MACHINE QUOTE:
Name: Racer - Steady Rest - Bronze Type, 10" Capacity
Price: Call For Price
Stock No:# RACER36
ADD TO MACHINE QUOTE:
Name: Racer - Steady Rest - Roller Type, 10" Capacity
Price: Call For Price
Stock No:# RACER37
ADD TO MACHINE QUOTE:
Name: Racer - Two Speed Tailstock (call for information/pricing)
Price: Call For Price
Stock No:# RACER64
ADD TO MACHINE QUOTE:
Name: Racer - Rear Toolpost (call for information/pricing)
Price: Call For Price
Stock No:# RACER65
ADD TO MACHINE QUOTE:
Name: Racer - 3 & 4 Jaw & Collet Chucks (call for information/pricing)
Price: Call For Price
Stock No:# RACER66
ADD TO MACHINE QUOTE:
Name: Racer - Turret Toolpost (call for information/pricing)
Price: Call For Price
Stock No:# RACER67
ADD TO MACHINE QUOTE:
Name: Racer - Live Centers (call for information/pricing)
Price: Call For Price
Stock No:# RACER68
ADD TO MACHINE QUOTE:
Name: Racer - Coolant System (call for information/pricing)
Price: Call For Price
Stock No:# RACER69
ADD TO MACHINE QUOTE:
Name: Racer - 36" diameter (Large) Face Plate (call for information/pricing)
Price: Call For Price
Stock No:# RACER70
ADD TO MACHINE QUOTE:
Name: Racer - Steady Rest - Bronze Type, 6" Capacity
Price: Call For Price
Stock No:# RACER34B
ADD TO MACHINE QUOTE:
Name: Racer - Steady Rest - Roller Type, 6" Capacity
Price: Call For Price
Stock No:# RACER35C
ADD TO MACHINE QUOTE:
Name: Racer - Telescopic Taper Attachment
Price: Call For Price
Stock No:# RACER1C
ADD TO MACHINE QUOTE:
Name: Racer - Micrometer Carriage Stop, INCH
Price: Call For Price
Stock No:# RACER44C
ADD TO MACHINE QUOTE:
Name: Racer - Micrometer Carriage Stop, METRIC
Price: Call For Price
Stock No:# RACER45A
ADD TO MACHINE QUOTE:
* Temporary specifications subject to verification.
All quotations subject to prior sale.
New pricing is good only at time of invoice and must be paid Immediately to guarantee no price increases by the manufacturers.
Similar Machines
Stock No:#SM2060
Manufacturer: Standard Modern
Capacity: 20" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$24,500.00
Stock No:#SMYCL2060
Manufacturer: Birmingham
Capacity: 20"/29" x 60"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SMPL2060
Manufacturer: Baileigh
Capacity: 20" x 60"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SMPL2080
Manufacturer: Baileigh
Capacity: 20" x 80"
Category: Lathes
Subcategory: Engine
Condition: New
Video Icon
View Complete Specs
Stock No:#SM2080
Manufacturer: Standard Modern
Capacity: 20" x 80"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$24,500.00
Stock No:#SMYCL2080
Manufacturer: Birmingham
Capacity: 20"/29" x 80"
Category: Lathes
Subcategory: Engine
Condition: New
Video Icon
View Complete Specs
$29,850.00
Finance as low as $612.22 Per Mo.*
Stock No:#SMGML2080
Manufacturer: GMC
Capacity: 20" x 80"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$27,250.00
Finance as low as $558.90 Per Mo.*
Stock No:#SMYCL20120
Manufacturer: Birmingham
Capacity: 20"/29" x 120"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SM20120
Manufacturer: Standard Modern
Capacity: 20"/26" x 120"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$24,200.00
Stock No:#SM2140SC
Manufacturer: Acra
Capacity: 21"/28" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Used Machines
$12,500.00
Stock No:#A5306
Manufacturer: Standard Modern
Capacity: 19" x 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$12,500.00
Stock No:#A4428
Manufacturer: LeBlond Regal
Capacity: 19" x 72"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$17,500.00
Stock No:#A6831
Manufacturer: Whacheon
Capacity: 20 1/2" x 60"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$5,500.00
Stock No:#A6090
Manufacturer: Hes
Capacity: 20" - 28" x 64"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$12,500.00
Stock No:#A4427
Manufacturer: LeBlond Regal
Capacity: 20" x 72"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$17,500.00
Stock No:#A6832
Manufacturer: Supertec
Capacity: 22" x 60"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$15,500.00
Stock No:#A7393
Manufacturer: Cadillac
Capacity: 22"/31" x 60"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$16,750.00
Stock No:#A7642
Manufacturer: Mori Seiki
Capacity: 22" x 60"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$25,500.00
Finance as low as $523.01 Per Mo.*
Stock No:#A6077
Manufacturer: Tuda
Capacity: 23"/30" x 118"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$16,500.00
Stock No:#A7697
Manufacturer: Mori Seiki
Capacity: 24"/31" x 60"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
New Machines
Used Machines
SHIPPING
Sterling Machinery Exchange can help you with shipping worldwide. We ship daily and can get amazing shipping rates to make your purchase easier
Please let us know your information and we can find out the cost to your door!
Types of Trucking We Offer:
*TRUCKLOAD SHIPPING* The Full Truckload Advantage encompasses a comprehensive, end-to-end range of cargo transit and logistics solutions, backed by cutting-edge shipping analytic and monitoring technology.
- Reduced Cost Per Unit
- Shortened Transit Times
- Fewer Damages
- Dedicated Capacity
- More Cargo Insurance
- Thousands of Carriers to Choose From
- Ail or Rubber Tire Option
- Full Truckload
- Van
- Flatbed
- Standard 48' Flatbed
- Step Deck
- Removable Goose Neck
- Over-dimensional
- Conestoga
- Curtain Van
- Refrigerated
- Double-drop/Lowboy
- Partial Truckload
- Consolidated Truckloads
- Volume LTL
- Dedicated Partial Truckload
- Specialized Services
- Cross Dock
- E-track/Logistical Trailers
- Break Bulk
- Short Term Warehousing
- TWIC/TSA Services
- White Glove
- Intermodal
- 48' and 53' Containers
- 20', 40', and 45'
- International Containers & High Cubes
- Drayage (Port, Rail)
- *LTL SHIPPING*
Our LTL shipping offers a best-in-class proprietary Transportation Management System tailored to the needs of LTL shippers. CARRIER RATE 2.0 provides an industry-leading, all-in-one solution for obtaining quotes, booking, and managing shipments.
- Choose your carrier based on cost, transit time, and preference
- Choose from industry leading carriers for your specific shipment
- Schedule pickups with one click!
- Track and manage your shipments online
- QUOTE
- Enter Origin & Destination Zip Codes
- Select Package Type
- Enter Pallet Count for Pallet Rate
- Enter Class and Weight
- Add Accessorials
- *EXPEDITED SHIPPING*
We understand our transportation and logistics customers are looking for ways to save time and money. Air freight shipping means on-time delivery is a top priority. Our technology, relationships, and team of industry professionals provide an unparalleled ability to meet your most important shipping needs. Services Offerings
- Next Flight Out (NFO’s)
- Next Day by 1030
- Exclusive Use Vehicles (E.U.V.’s)
- Next Day by Noon
- Local Pickup/Delivery
- Next Day by 5pm
- 2nd Day by 1030
- 2nd Day by Noon
- 2nd Day by 5pm
- 3rd Day by 1030
- 3rd Day by Noon
- 3rd Day by 5pm
- 3-5 Day Economy Ground
- Trade Show Pickup/Delivery
- Weekend Pickup/Delivery
- Export/Import Freight
- After Hours Pickup/Delivery
- Project Freight/Distributions
- Aircraft Charters
- Ocean Services
Standard Machine & Tool was founded in 1931 by two partners in Windsor, Ontario, Canada. In 1935, an unrelated company began operations in Toronto as Modern Tools Works. Staveley Industries, a British company, purchased both Standard Machine & Tool Ltd. and Modern Tool Works Ltd. in 1955. The combined entity was incorporated under the name Standard Modern Tool Company Ltd. with operations in Toronto.
Over the last 83 years ownership has changed but the quality and pride has always been of high importance till this day and as always Standard Modern lathes are still manufacturered in North America.
With over 17,000 Standard Modern installations in North America, Standard Modern lathes are being used extensively in precision, high-tech machine shops, used by both the Canadian and United States military and by many technical colleges and trade schools.
With over 17,000 Standard Modern installations in North America, Standard Modern lathes are being used extensively in precision, high-tech machine shops, used by both the Canadian and United States military and by many technical colleges and trade schools.