These machines transfer the heat generated by cutting to the chips created by the saw blade. Therefore, the blade and material being cut remain cold, unlike an abrasive saw, which abrades the metal and creates a great deal of heat in the metal and cutting blade. Cold saws use either a solid high speed steel (HSS) or tungsten carbide-tipped, resharpenable circular saw blade. They are equipped with an electric motor and a gear reduction unit to reduce the saw blade\'s rotational speed while maintaining constant torque. This allows the HSS saw blade to feed at a constant rate with a very high chip load per tooth.

Cold & Carbide (Chop Saw) Saws MACHINERY AND EQUIPMENT FOR SALE


4 Items

Set Descending Direction
  1. Used

    12" Used Dake Heavy Duty Semi Automatic Cold Saw, Mdl. MEP 350X Tiger, Automatic/Manual Air Vise, MEP Control, 350mm Blade, #A7049

    Used-DAKE-Used Dake Heavy Duty Semi Automatic Cold Saw-MEP 350X Tiger-A7049-01
    $8,750.00
    Stock No: #A7049 Manufacturer: DAKE Model: MEP 350X Tiger Capacity: 12"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: Used

  2. Used

    14-1/2" Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Year (2010) #A5696

  1. New

    14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370S

  2. New

    14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head), Mdl. Euromatic 370S-L, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370SL

    New-DAKE-Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head)-EUROMATIC 370S-L-SMEuromatic370SL-01
    $19,575.00
    Stock No: #SMEuromatic370SL Manufacturer: DAKE Model: EUROMATIC 370S-L Capacity: 14-1/2"
    Category: Saws, Cold & Carbide (Chop Saw)
    Condition: New
    Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head)

4 Items

Set Descending Direction