We're able to obtain brokers for Cross country and worldwide deliveries and only hire fully insured Flatbed Double Drops, Single Drops and Permitted Loads.
Make sure to get insurance, as this is not usually included. All machines come banded and strapped to a pallet unless instructed otherwise.
Crating is optional and comes at extra charge.
Loading docks or ramps are required! If you do not have one, inform the shipping company and there will more than likely be an extra charge.
14"/19" x 40" Brand New Baileigh Lathe, Mdl. PL-1440E, Fully Assembled, 2 Axis Digital Readout, 6" 3 Jaw Chuck, 8" 4 Jaw Chuck, Face Plate, Steady Rest, Follow Rest, Live Center, Quick Change Tool Holder, Foot Brake, Coolant System With Splash Guard, Removable Chip Tray, Micrometer Saddle Stop, Halogen Work Light, 220V / 1-Phase, #SMPL1440E
Stock No:
#SMPL1440E
Manufacturer:
Baileigh
Model:
PL-1440E
Capacity:
14" x 40"
Condition:
New
Starting At: $14,999.00
DETAILED SPECIFICATION
Capacity
Maximum Swing Over Bed
14"
Maximum Swing Over Cross Slide
8.6"
Maximum Swing Over Gap Diameter
19.9"
Center Length
40"
Width Of Bed
7.086"
Weight (Lbs.)
1,450
Spindle Nose
D1 - 4"
Spindle Bore
1.50"
Spindle Bore Taper
Morse #5
Spindle Speeds
8
Top Slide Travel
2.68"
Maximum Tool Selection
0.625" x 0.625"
Cross Slide Travel
6.29"
Leadscrew Thread Pitch
8 TPI
Longitudinal Feed Range
0.002" - 0.0548"/rev
Cross Feed Range
0.007" - 0.0187"/rev
Metric Thread Range
0.4 - 7MM
Inch Thread Range
0.0157" - 0.275"
Sleeve Diameter
1.65"
Sleeve Travel
4.5"
Sleeve Taper
Morse #3
Horsepower
2 H.P.
Power Requirement
220v 1-Phase
Dimension (L x W x H)
79x44x63
WEIGHT
1430 lbs
EQUIPPED WITH
Face Plate
Fully Assembled
#6 morse Taper
Halogen Work Light
Steady Rest
Live Center
Foot Brake
Follow Rest
Quick CHange Tool Holder
Coolant System With Splash Guard
Micrometer Saddle Stop
Removable Chip Tray
2 Axis Digital Readout
220V / 1-Phase
OPTIONAL EQUIPMENT AND TOOLING
Name: Import - 8" 3-Jaw (D1-4) Camlock Lathe Chuck
Price: Call For Price
Stock No:# SM3900-4607
ADD TO MACHINE QUOTE:
Additional Information
The PL-1440E metal lathe raises the bar for entry-level lathes. Built with ground and hardened slideways and a DRO, this gap lathe is reliable and precise.
- Recommended for small to medium shops and schools.
- 8 spindle speeds, ranging from 90 to 1,800 rpm.
- 3 hp motor runs on a 220-volt single-phase power, so you can use it almost anywhere.
- No assembly required. Just open the crate and wire it up.
- Precision-ground and hardened ways ensure years of tight tolerances.
- Digital readout (pre-installed) helps you make precise cuts.
- Capable of making metric and standard threads.
- Gap lathe design allows you remove a section of the slide to fit a slightly larger diameter.
- Comes standard with:
- 3-jaw and 4-jaw chucks.
- Headstock chuck guard with automatic safety switch.
- Steady rest and follow rest.
- Face plate.
- Safety foot brake.
- Integrated coolant system, which maintains accuracy and helps the machine last longer.
- Halogen work light.
- Optional taper attachment for making cones is sold separately.
- Covered by a 1-year parts warranty.
- We stock replacement parts at our Wisconsin headquarters so we can ship them out quickly.
- Our team of experienced metalworkers is here to provide lifetime technical support by phone.
* Temporary specifications subject to verification.
All quotations subject to prior sale.
New pricing is good only at time of invoice and must be paid Immediately to guarantee no price increases by the manufacturers.
Similar Machines
$7,650.00
Stock No:#SMYCL1440KGY
Manufacturer: Birmingham
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SM1440
Manufacturer: Standard Modern
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SM1440MILITARY
Manufacturer: Standard Modern
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$15,200.00
Stock No:#SMATEL1440C
Manufacturer: Acra
Capacity: 14" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$8,950.00
Stock No:#SMGML1440BGF3
Manufacturer: GMC
Capacity: 14"/19" x 40"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: New
View Complete Specs
$16,000.00
Stock No:#SM1440TE
Manufacturer: Acra
Capacity: 14 3/16"/ 21" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$20,500.00
Stock No:#SM1440TVS
Manufacturer: Acra
Capacity: 14"/21" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Starting At:
$14,500.00
Stock No:#SM1440SVS
Manufacturer: Acra
Capacity: 14" / 20" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$8,350.00
Stock No:#SMGML1440BGF1
Manufacturer: GMC
Capacity: 14"/19" x 40"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: New
Video Icon
View Complete Specs
$19,000.00
Stock No:#SM1460TE
Manufacturer: Acra
Capacity: 14 3/16" / 21" x 60
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$23,000.00
Stock No:#SM1460TVS
Manufacturer: Acra
Capacity: 14 3/16"/ 21" x 60"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$26,600.00
Finance as low as $545.57 Per Mo.*
Stock No:#SM1550C
Manufacturer: Acra
Capacity: 15"/24" x 50"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$30,186.00
Finance as low as $619.11 Per Mo.*
Stock No:#SMAT1550GTW
Manufacturer: Lagun
Capacity: 15" x 50"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: New
View Complete Specs
$10,500.00
Stock No:#A7295
Manufacturer: LeBlond Makino
Capacity: 15" x 54"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$8,750.00
Stock No:#A7249
Manufacturer: LeBlond Regal
Capacity: 15" x 54"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$6,950.00
Stock No:#A5996
Manufacturer: Goodway
Capacity: 16"/ 24" x 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$9,750.00
Stock No:#A7057
Manufacturer: Victor
Capacity: 16"/23" x 40"
Category: Lathes
Subcategory: Engine
Condition: Used
View Complete Specs
$14,850.00
Stock No:#SMGML1640HD
Manufacturer: GMC
Capacity: 16"/23" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
Video Icon
View Complete Specs
Starting At:
$12,000.00
Stock No:#SM1640GCY
Manufacturer: Acra
Capacity: 16"/22" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$12,000.00
Stock No:#SMFEL1640GCY
Manufacturer: Acra
Capacity: 16" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Starting At:
$15,500.00
Stock No:#SMLD1640
Manufacturer: Atrump
Capacity: 16"/21" x 40"
Category: Lathes
Subcategory: Engine
Precision
Precision
Condition: New
View Complete Specs
$18,500.00
Stock No:#SM1640TE
Manufacturer: Acra
Capacity: 16 3/16"/ 23" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Starting At:
$12,634.88
Stock No:#SMYCL1640KGY
Manufacturer: Birmingham
Capacity: 16"/23" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
$17,500.00
Stock No:#SMYCL1640
Manufacturer: Birmingham
Capacity: 16"/26" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
View Complete Specs
Stock No:#SMPL1640
Manufacturer: Baileigh
Capacity: 16"/23" x 40"
Category: Lathes
Subcategory: Engine
Condition: New
Video Icon
View Complete Specs
New Machines
Used Machines
SHIPPING
Sterling Machinery Exchange can help you with shipping worldwide. We ship daily and can get amazing shipping rates to make your purchase easier
Please let us know your information and we can find out the cost to your door!
Types of Trucking We Offer:
*TRUCKLOAD SHIPPING* The Full Truckload Advantage encompasses a comprehensive, end-to-end range of cargo transit and logistics solutions, backed by cutting-edge shipping analytic and monitoring technology.
- Reduced Cost Per Unit
- Shortened Transit Times
- Fewer Damages
- Dedicated Capacity
- More Cargo Insurance
- Thousands of Carriers to Choose From
- Ail or Rubber Tire Option
- Full Truckload
- Van
- Flatbed
- Standard 48' Flatbed
- Step Deck
- Removable Goose Neck
- Over-dimensional
- Conestoga
- Curtain Van
- Refrigerated
- Double-drop/Lowboy
- Partial Truckload
- Consolidated Truckloads
- Volume LTL
- Dedicated Partial Truckload
- Specialized Services
- Cross Dock
- E-track/Logistical Trailers
- Break Bulk
- Short Term Warehousing
- TWIC/TSA Services
- White Glove
- Intermodal
- 48' and 53' Containers
- 20', 40', and 45'
- International Containers & High Cubes
- Drayage (Port, Rail)
- *LTL SHIPPING*
Our LTL shipping offers a best-in-class proprietary Transportation Management System tailored to the needs of LTL shippers. CARRIER RATE 2.0 provides an industry-leading, all-in-one solution for obtaining quotes, booking, and managing shipments.
- Choose your carrier based on cost, transit time, and preference
- Choose from industry leading carriers for your specific shipment
- Schedule pickups with one click!
- Track and manage your shipments online
- QUOTE
- Enter Origin & Destination Zip Codes
- Select Package Type
- Enter Pallet Count for Pallet Rate
- Enter Class and Weight
- Add Accessorials
- *EXPEDITED SHIPPING*
We understand our transportation and logistics customers are looking for ways to save time and money. Air freight shipping means on-time delivery is a top priority. Our technology, relationships, and team of industry professionals provide an unparalleled ability to meet your most important shipping needs. Services Offerings
- Next Flight Out (NFO’s)
- Next Day by 1030
- Exclusive Use Vehicles (E.U.V.’s)
- Next Day by Noon
- Local Pickup/Delivery
- Next Day by 5pm
- 2nd Day by 1030
- 2nd Day by Noon
- 2nd Day by 5pm
- 3rd Day by 1030
- 3rd Day by Noon
- 3rd Day by 5pm
- 3-5 Day Economy Ground
- Trade Show Pickup/Delivery
- Weekend Pickup/Delivery
- Export/Import Freight
- After Hours Pickup/Delivery
- Project Freight/Distributions
- Aircraft Charters
- Ocean Services
The Place for Metal & Woodworking Machinery !
HIGH-PERFORMANCE MACHINES. PROFITABLE SOLUTIONS. EXPERT TECHNICAL SUPPORT.
Baileigh Industrial®, Inc. manufactures metal and woodworking equipment, trusted by customers ranging from large-scale commercial fabrication shops to passionate hobbyists. For 16 years, we’ve created machines that increase productivity, day in & day out, delivering repeatable quality results.
At Baileigh (pronounced “Bailey”), we build our cutting-edge designs using only the best parts and materials to handle maximum capacities with ease. When you buy from us, upgrades and extras—like coolant systems in drill presses—come standard. Plus, many of our best-selling products, including tube and pipe benders, abrasive notchers and press brakes, are made in the USA.
Our commitment to customer service continues after each sale. You can count on speedy and secure shipping at reasonable rates. We also back our machines with a one-year parts warranty and unlimited technical support.nd equipment to meet our customers' needs. We always appreciate feedback from our customers.