15" x 50" Brand New Lagun Precision High Speed Gear Head Lathe (Colchester Type) with Clutch Headstock, Mdl. AT-1550-G-TW, Colchester Type Engine Lathe, Chip and Coolant Tray, Foot Brake, Full Length Rear Splash Guard, Compound Protection Guard (without limit switch), Manual Indexing Square 4 Position Tool Post, Back Plate, 2 MT4 Centers & Main Spindle Reduction Sleeve, Matrix Disk Clutch, Lead Screw Protection Cover, Halogen Work Light, Operator Protection Guard Compound Mounted, Coolant System, Threading Dial, Leveling Bolts & Pads, Tailstock Quill with Tang, Inch/Metric Dials on Compound & Cross Slide (Direct Readings), Tool Box, Spindle Nose 2-3/16", Operation Manual, #SMAT1550GTW

Stock No:
#SMAT1550GTW
Manufacturer:
Lagun
Model:
AT-1550-G-TW
Capacity:
15" x 50"
Condition:
New
Print a Quick Quote!
View Gallery
DETAILED SPECIFICATION
Overall Capacity
15-1/4" x 50"
Capacity
.
Center Height
7-1/2"
Swing Over Bed
15-1/4"
Swing Over Cross Slide
9-3/8"
Distance Between Centers
50"
Headstock
.
Spindle Nose
D1 - 6
Spindle Bore (Max Bar Dia)
2-3/16"
Spindle Speed
16 Steps
Spindle Speed Range
25 to 2000 rpm
Ranges
25-33-45-60-80-108-140-190-265-350-470-625-840-1120-1500-2000
Carriage
.
Width of Bridge
17-1/2"
Cross Slide Travel
9-1/4"
Top Slide Travel
4-3/4"
Bed
.
Number of V Ways
3 Each
Bed Width
11"
Swing in Gap
24"
Gap Bed Length Face Plate
7-5/8"
Tailstock
.
Quill Diameter
2.8"
Quill Center
MT 4
Quill Travel
6-1/8"
Feeds and Threads
.
Range of Whitworth Threads & Number
2 - 72 TPI / 45
Range of Metric Threads & Number
0.2 - 14 / 39
Range of D.P. & Number
8 - 44 / 21
Range of M.P. & Number
0.3 - 3.5 / 18
Longitudinal Feed
0.0015 - 0.04"
Cross Feeds
0.00075 - 0.02"
Coolant Pump Motor
1/8 HP
Horsepower
7.5 HP
Voltage
220/440V ~ 3 Phase
Dimensions (L x W x H)
102" x 43" x 60"
WEIGHT
3740 lbs
EQUIPPED WITH
Colchester Type Engine Lathe
Chip And Coolant Tray
Full Length Rear Splash Guard
Coolant System
Halogen Work Light
Compound Protection Guard (without Limit Switch)
Manual Indexing Square 4 Position Tool Post
Foot Brake
Tool Box
Back Plate
2 MT4 Centers & Main Spindle Reduction Sleeve
Matrix Disk Clutch
Lead Screw Protection Cover
Operation Manual
Operator Protection Guard Compound Mounted
Threading Dial
Leveling Bolts & Pads
Tailstock Quill With Tang
Inch/Metric Dials On Compound & Cross Slide (Direct Readings)
Spindle Nose 2-3/16"
OPTIONAL EQUIPMENT AND TOOLING
lagun - electronic variable speed headstock, 7.5 hp motor drive, jic, nfpa-79, nema 12 electronics (evs)
Name: Lagun - Electronic Variable Speed Headstock, 7.5 HP Motor Drive, JIC, NFPA-79, NEMA 12 Electronics (EVS)
Price: Call For Price
Stock No:# 20-310-15
ADD TO MACHINE QUOTE:

lagun - electronic variable speed headstock, 7.5 hp, 220 volts (evs)
Name: Lagun - Electronic Variable Speed Headstock, 7.5 HP, 220 Volts (EVS)
Price: Call For Price
Stock No:# 20-310-15-Y
ADD TO MACHINE QUOTE:

lagun - electronic variable speed headstock, 440 volts (evs)
Name: Lagun - Electronic Variable Speed Headstock, 440 Volts (EVS)
Price: Call For Price
Stock No:# 20-170-C-440
ADD TO MACHINE QUOTE:

lagun - allen bradley electrics, 7.5 hp motor
Name: Lagun - Allen Bradley Electrics, 7.5 HP Motor
Price: Call For Price
Stock No:# 20-AB-7.5HP
ADD TO MACHINE QUOTE:

lagun - jic, nfpa-79/nema 12 special electrics
Name: Lagun - JIC, NFPA-79/NEMA 12 Special Electrics
Price: Call For Price
Stock No:# 20-289-C-15
ADD TO MACHINE QUOTE:

lagun - ul certification (required for evs option 20-310-15 or jic 20-289-c-15)
Name: Lagun - UL Certification (Required for EVS Option 20-310-15 or JIC 20-289-C-15)
Price: Call For Price
Stock No:# 20-UL-001
ADD TO MACHINE QUOTE:

lagun - steady rest - (6
Name: Lagun - Steady Rest - (6" Capacity) with Rollers
Price: Call For Price
Stock No:# 20-320-15
ADD TO MACHINE QUOTE:

lagun - follow rest with bronze tips
Name: Lagun - Follow Rest with Bronze Tips
Price: Call For Price
Stock No:# 20-325-15
ADD TO MACHINE QUOTE:

lagun - 8
Name: Lagun - 8" 3 Jaw Chuck D1-6, Direct Mount (Semi-Steel)
Price: Call For Price
Stock No:# 20-300-08D6
ADD TO MACHINE QUOTE:

lagun - 10
Name: Lagun - 10" 3 Jaw Chuck D1-6, Direct Mount (Semi-Steel)
Price: Call For Price
Stock No:# 20-300-10D6
ADD TO MACHINE QUOTE:

lagun - 12
Name: Lagun - 12" 3 Jaw Chuck D1-6, Direct Mount (Semi-Steel)
Price: Call For Price
Stock No:# 20-300-12D6
ADD TO MACHINE QUOTE:

lagun - 8
Name: Lagun - 8" 3 Jaw Chuck D1-6, Direct Mount (Steel Body)
Price: Call For Price
Stock No:# 20-301-08D6
ADD TO MACHINE QUOTE:

lagun - 10
Name: Lagun - 10" 3 Jaw Chuck D1-6, Direct Mount (Steel Body)
Price: Call For Price
Stock No:# 20-301-10D6
ADD TO MACHINE QUOTE:

lagun - 12
Name: Lagun - 12" 3 Jaw Chuck D1-6, Direct Mount (Steel Body)
Price: Call For Price
Stock No:# 20-301-12D6
ADD TO MACHINE QUOTE:

lagun - 10
Name: Lagun - 10" 4 Jaw Chuck D1-6, Direct Mount (Semi-Steel)
Price: Call For Price
Stock No:# 20-400-10D6
ADD TO MACHINE QUOTE:

lagun - 12
Name: Lagun - 12" 4 Jaw Chuck D1-6, Direct Mount (Semi-Steel)
Price: Call For Price
Stock No:# 20-400-12D6
ADD TO MACHINE QUOTE:

lagun - 8
Name: Lagun - 8" 4 Jaw Chuck D1-6, Direct Mount (Steel Body)
Price: Call For Price
Stock No:# 20-401-08D6
ADD TO MACHINE QUOTE:

lagun - 10
Name: Lagun - 10" 4 Jaw Chuck D1-6, Direct Mount (Steel Body)
Price: Call For Price
Stock No:# 20-401-10D6
ADD TO MACHINE QUOTE:

lagun - 12
Name: Lagun - 12" 4 Jaw Chuck D1-6, Direct Mount (Steel Body)
Price: Call For Price
Stock No:# 20-401-12D6
ADD TO MACHINE QUOTE:

lagun - face plate - 14
Name: Lagun - Face Plate - 14" (for D1-6 Spindle Nose)
Price: Call For Price
Stock No:# 20-315-15
ADD TO MACHINE QUOTE:

lagun - back plate or dog plate - 8
Name: Lagun - Back Plate or Dog Plate - 8", D1-6
Price: Call For Price
Stock No:# 20-318-15
ADD TO MACHINE QUOTE:

lagun - chuck guard with safety limit switch
Name: Lagun - Chuck Guard with Safety Limit Switch
Price: Call For Price
Stock No:# 20-314-15
ADD TO MACHINE QUOTE:

lagun - drill chuck 1/2
Name: Lagun - Drill Chuck 1/2" (Key Type) with #4 Morse Taper Shank
Price: Call For Price
Stock No:# 20-10-057
ADD TO MACHINE QUOTE:

lagun - drill chuck 3/4
Name: Lagun - Drill Chuck 3/4" (Key Type) with #4 Morse Taper Shank
Price: Call For Price
Stock No:# 20-6336
ADD TO MACHINE QUOTE:

lagun - 2 axis acu-rite 200s digital read out (installed)
Name: Lagun - 2 Axis Acu-Rite 200S Digital Read Out (Installed)
Price: Call For Price
Stock No:# 20-1550
ADD TO MACHINE QUOTE:

lagun - 2 axis acu-rite 300s digital read out with thread assist for 15
Name: Lagun - 2 Axis Acu-Rite 300S Digital Read Out with Thread Assist for 15" x 50" (Installed)
Price: Call For Price
Stock No:# 20-1550-TA
ADD TO MACHINE QUOTE:

lagun - 2 axis fagor 40i digital read out with constant surface speed for evs lathes 15
Name: Lagun - 2 Axis Fagor 40i Digital Read Out with Constant Surface Speed for EVS Lathes 15" x 50" (Installed) (4 Gear Range)
Price: Call For Price
Stock No:# 200-1550-CSS
ADD TO MACHINE QUOTE:

lagun - 2 axis newall dp700 digital read out (installed)
Name: Lagun - 2 Axis Newall DP700 Digital Read Out (Installed)
Price: Call For Price
Stock No:# 20-396-15
ADD TO MACHINE QUOTE:

lagun - custom paint color (call for information/pricing)
Name: Lagun - Custom Paint Color (call for information/pricing)
Price: Call For Price
Stock No:# 20-10-071
ADD TO MACHINE QUOTE:

lagun - taper attachment, telescopic type, travel 6
Name: Lagun - Taper Attachment, Telescopic Type, Travel 6" - 10 Degrees
Price: Call For Price
Stock No:# 20-340-15
ADD TO MACHINE QUOTE:

lagun - micrometer carriage stop
Name: Lagun - Micrometer Carriage Stop
Price: Call For Price
Stock No:# 20-355-15
ADD TO MACHINE QUOTE:

lagun - carriage stop - 5 position bed with micrometer
Name: Lagun - Carriage Stop - 5 Position Bed with Micrometer
Price: Call For Price
Stock No:# 20-350-15
ADD TO MACHINE QUOTE:

lagun - live center, mt4
Name: Lagun - Live Center, MT4
Price: Call For Price
Stock No:# 20-10-049
ADD TO MACHINE QUOTE:

lagun - aloris quick change tool holder set (cxa #3) - 5 piece (1 tool post & 4 holders), capacity 3/4
Name: Lagun - Aloris Quick Change Tool Holder Set (CXA #3) - 5 Piece (1 Tool Post & 4 Holders), Capacity 3/4"
Price: Call For Price
Stock No:# 20-374-15
ADD TO MACHINE QUOTE:

lagun - aloris quick change tool holder set (cxa #3) - 7 piece (1 tool post & 6 holders), capacity 3/4
Name: Lagun - Aloris Quick Change Tool Holder Set (CXA #3) - 7 Piece (1 Tool Post & 6 Holders), Capacity 3/4"
Price: Call For Price
Stock No:# 20-373-15
ADD TO MACHINE QUOTE:

lagun - dorian tool 5 piece 4 way quadra quick change tool post set (4 assorted tool holders)
Name: Lagun - Dorian Tool 5 Piece 4 Way Quadra Quick Change Tool Post Set (4 Assorted Tool Holders)
Price: Call For Price
Stock No:# 20-00060
ADD TO MACHINE QUOTE:

lagun - 5-c lever type production collet closer (up to 1-1/16
Name: Lagun - 5-C lever Type Production Collet Closer (up to 1-1/16" Capacity), D1-6
Price: Call For Price
Stock No:# 20-385-15
ADD TO MACHINE QUOTE:

lagun - handwheel type collet chuck - 5-c, d1-6 (spindle nose mounted)
Name: Lagun - Handwheel Type Collet Chuck - 5-C, D1-6 (Spindle Nose Mounted)
Price: Call For Price
Stock No:# 20-386-15
ADD TO MACHINE QUOTE:

lagun - 5-c collets: 16 pieces, 1/8
Name: Lagun - 5-C Collets: 16 Pieces, 1/8" to 1-1/16" Capacity
Price: Call For Price
Stock No:# 20-387-15
ADD TO MACHINE QUOTE:

lagun - completely enclosed wood crate (treated wood), machine treated with anti-rust coat over all metal surfaces and wrapped in thermal sealed foil bag (call for information/pricing)
Name: Lagun - Completely Enclosed Wood Crate (Treated Wood), Machine Treated with Anti-Rust Coat over all Metal Surfaces and Wrapped in Thermal Sealed Foil Bag (call for information/pricing)
Price: Call For Price
Stock No:# 10-EFC-1200-A
ADD TO MACHINE QUOTE:

* Temporary specifications subject to verification.

  All quotations subject to prior sale.

  New pricing is good only at time of invoice and must be paid Immediately to guarantee no price increases by the manufacturers.

Similar Machines
Used-Webb-Used Webb Gap Bed Heavy Duty Engine Lathe (Heavy Duty)-17GX40-A7312-01
$13,500.00
Used-LeBlond Makino-Used LeBlond Makino Engine Lathe-REGAL SERVO SHIFT-A7295-01
$10,500.00
Stock No:#A7295
Manufacturer: LeBlond Makino
Capacity: 15" x 54"
Category: Lathes
Subcategory: Engine
Condition: Used
Used-LeBlond Regal-Used Leblond Geared Head Lathe-15
$8,750.00
Stock No:#A7249
Manufacturer: LeBlond Regal
Capacity: 15" x 54"
Category: Lathes
Subcategory: Engine
Condition: Used
New Machines
Used Machines

SHIPPING

We're able to obtain brokers for Cross country and worldwide deliveries and only hire fully insured Flatbed Double Drops, Single Drops and Permitted Loads.

Make sure to get insurance, as this is not usually included. All machines come banded and strapped to a pallet unless instructed otherwise.
Crating is optional and comes at extra charge.
Loading docks or ramps are required! If you do not have one, inform the shipping company and there will more than likely be an extra charge.
* Indicates required fields

Sterling Machinery Exchange can help you with shipping worldwide. We ship daily and can get amazing shipping rates to make your purchase easier

Please let us know your information and we can find out the cost to your door!
Types of Trucking We Offer:

*TRUCKLOAD SHIPPING* The Full Truckload Advantage encompasses a comprehensive, end-to-end range of cargo transit and logistics solutions, backed by cutting-edge shipping analytic and monitoring technology.

  • Reduced Cost Per Unit
  • Shortened Transit Times
  • Fewer Damages
  • Dedicated Capacity
  • More Cargo Insurance
  • Thousands of Carriers to Choose From
  • Ail or Rubber Tire Option
  • Full Truckload
    • Van
    • Flatbed
    • Standard 48' Flatbed
    • Step Deck
    • Removable Goose Neck
    • Over-dimensional
    • Conestoga
    • Curtain Van
    • Refrigerated
    • Double-drop/Lowboy
  • Partial Truckload
    • Consolidated Truckloads
    • Volume LTL
    • Dedicated Partial Truckload
  • Specialized Services
    • Cross Dock
    • E-track/Logistical Trailers
    • Break Bulk
    • Short Term Warehousing
    • TWIC/TSA Services
    • White Glove
  • Intermodal
    • 48' and 53' Containers
    • 20', 40', and 45'
    • International Containers & High Cubes
    • Drayage (Port, Rail)
  • *LTL SHIPPING*

Our LTL shipping offers a best-in-class proprietary Transportation Management System tailored to the needs of LTL shippers. CARRIER RATE 2.0 provides an industry-leading, all-in-one solution for obtaining quotes, booking, and managing shipments.

    • Choose your carrier based on cost, transit time, and preference
    • Choose from industry leading carriers for your specific shipment
    • Schedule pickups with one click!
    • Track and manage your shipments online
  • QUOTE
    • Enter Origin & Destination Zip Codes
    • Select Package Type
    • Enter Pallet Count for Pallet Rate
    • Enter Class and Weight
    • Add Accessorials
  • *EXPEDITED SHIPPING*

We understand our transportation and logistics customers are looking for ways to save time and money. Air freight shipping means on-time delivery is a top priority. Our technology, relationships, and team of industry professionals provide an unparalleled ability to meet your most important shipping needs. Services Offerings

    • Next Flight Out (NFO’s)
    • Next Day by 1030
    • Exclusive Use Vehicles (E.U.V.’s)
    • Next Day by Noon
    • Local Pickup/Delivery
    • Next Day by 5pm
    • 2nd Day by 1030
    • 2nd Day by Noon
    • 2nd Day by 5pm
    • 3rd Day by 1030
    • 3rd Day by Noon
    • 3rd Day by 5pm
    • 3-5 Day Economy Ground
    • Trade Show Pickup/Delivery
    • Weekend Pickup/Delivery
    • Export/Import Freight
    • After Hours Pickup/Delivery
    • Project Freight/Distributions
    • Aircraft Charters
    • Ocean Services

LATE 1930

Lagun Machinery opens its doors with 15 employees in the industrial town of Elgoibar, Spain. The bench-type hand mill is the first machine produced.

Family-owned since 1968, Lagun Engineering Solutions is proud to be the oldest machine distributor in the U.S. With more than 95,000 machines installed worldwide, building high-quality machinery, with exceptional customer service, is our commitment to you.

Our manual and CNC milling machines, lathes and machining centers provide a broad range of capabilities serving the power generation, aerospace, renewable energy, iron, steel, railway, earthmoving, oil, gas, and construction industries, along with the Department of Defense. No matter the task at hand, we’ll build the specific machine for the job, with the utmost attention to detail.

Work that isn’t handled in-house, is finished by our trusted factories around the world. Once your machine is built, we even laser-verify it to ensure it’s properly functioning and ready for production. After your equipment is installed, we go a step further and train your employees on how to operate the machine.

For added peace of mind, we provide on-call service with a 24 hour on-site guarantee, if ever there’s an issue. With a stock of more than three million replacement parts and accessories, we ensure your equipment will be up and running in no time.

Lagun Engineering Solutions provides a first-class experience, to make your job easier.