Last Updated :Mon, Oct 26, 2020

4000 Watts Brand New Cincinnati CNC Fiber Laser Cutting System, Mdl. CL-940, HMI 15" Color LCD Touch Screen, Nozzle Tip Cooling, 3/4" to 1-1/2" Steel Frame Construction, IPG Solid-State Fiber Laser, Lightweight Aluminum Honeycomb Gantry, A/C Brushless Permanent-Magnet Linear Servo Motors, High Resolution Open Style Linear Coders, Preloaded Extended-Lube-Interval Linear Bearings, Breakaway Non-Contact Autofocus Laser Head with Magnetic Coupling, 7.5" Focal Length Lens with Self-Aligning Lens Holder, Edge of Sheet Detection, CNC Programmable High Pressure Assist Gas (400 PSI Max.) Three Assist Gas Ports, Frame Mounted Compressed Air Dryer/Filter for Cooling & Purging Air, Box Cutting (Lower Pallet Special Function), Dual Pallet Cutting Tables (Material Supports, Quick-Adjust Material Clamps, Chain-Drive Pallet System), Recirculating Water-Cooling System, Fume Collection Plenum, Safety Lights, Tactile Foot for Cutting Non-Conductive Materials, One Operation & Safety Manual (Blue), Nesting Software, Cutting Area Enclosure, #SMCL940

Brand New Cincinnati CNC Fiber Laser Cutting System

Stock No: #SMCL940
Manufacturer: Cincinnati, Inc
Model: CL-940
Capacity: 4000 Watts
Condition: New
Section 179
Starting At:
Call for Price
DETAILED SPECIFICATION
Table Size60" x 120"
Table Load Capacity2,292 Lbs.
Max. Workpiece Dimensions
X Axis120"
Y Axis60"
Z Axis2-1/2" Above Each Pallet
Cutting Capacities
Nitrogen20 Ga. to 1/4"
Oxygen10 Ga. to 1/2"
Machine Speeds
Positioning Speed12,000 IPM
Rapid Traverse X & Y Axis8,500 IPM
Rapid Traverse X & Y Axis Simultaneous12,020 IPM
Rapid Traverse Z Axis1,700 IPM
Jog Mode
Normal Jog (X and Y Axis)300 IPM
Rapid Traverse Jog (X and Y Axis)1200 IPM
Z-Axis1700 IPM
Accelerations
X and Y Axis1.65 G
Z-Axis2.00 G
Machine Travel Limits
X Axis121"
Y Axis61"
Z Axis10"
Accuracies
Absolute Positioning X & Y Axis +/- 0.001"
Repeatability X & Y Axis.001"
Fume Control System
Standard Duct for Hookup21" ID/ 21-3/4" Bolt Circle
Recommended Air Flow Rate4500 SCFM
Programmable Assist Gases3
Chiller
Ambient Temperature35 °F to 105°F
Circuit #1 Laser Sonator
FluidDistilled Water
Capacity37 Gallons
Circuit #2 Optics, Linear Motors, Cutting Head
Fluid30% Downtherm SR1/ 70% Water
Capacity17 Gallons
Temperature Stability+/- 1°F (+/- .6°C)
Lens Focal Length7.5"
Assist Gas Pressure Adjustment5 - 400 PSIG
Ambient Temperature Range50° to 105°F
Controller
ManufacturerCincinnati Incorporated
ModelCustom Laser Control
MicroprocessorMulti-Processor
Operating SystemWindows Embedded Standard (WES)
Nozzle Cooling Purge Compressed Air Filter/Dryer
Compressed Air Supply480 SCFM @ 80 to 140 PSIG
Output: Instrument Air40°F Dewpoint
Fiber Laser Power Source
ManufacturerIPG
TypeSolid State Ytterbium Fiber
Power Output
Rated4000 Watt CW 2%
Modes of OperationContinuous Wave, Quasi-Continuous Wave
Pulse Frequency8 - 5000 Hz
Range10 - 105%
Beam Quality50 Micron Feeding Fiber
PolarizationRandom
Voltage460V ~ 3 Phase
Dimensions (W x D x H)395" x 183" x 92"
EQUIPPED WITH
HMI 15" Color LCD Touch Screen
Nozzle Tip Cooling
3/4" to 1-1/2" Steel Frame Construction
IPG Solid-State Fiber Laser
Lightweight Aluminum Honeycomb Gantry
A/C Brushless Permanent-Magnet Linear Servo Motors
High Resolution Open Style Linear Coders
Preloaded Extended-Lube-Interval Linear Bearings
Breakaway Non-Contact Autofocus Laser Head with Magnetic Coupling
7.5" Focal Length Lens with Self-Aligning Lens Holder
Edge of Sheet Detection
CNC Programmable High Pressure Assist Gas (400 PSI Max.) Three Assist Gas Ports
Frame Mounted Compressed Air Dryer/Filter for Cooling & Purging Air
Box Cutting (Lower Pallet Special Function)
Dual Pallet Cutting Tables (Material Supports, Quick-Adjust Material Clamps, Chain-Drive Pallet System)
Recirculating Water-Cooling System
Fume Collection Plenum
Safety Lights
Tactile Foot for Cutting Non-Conductive Materials
One Operation & Safety Manual (Blue)
Nesting Software
Cutting Area Enclosure

Additional information:

The CL-900 Series Fiber Laser System offers high speed cutting on thinner materials and lower operating costs. The CL-900 controls Human Machine Interface (HMI) is easily understood and intuitive in its use enabling operators to produce good parts independently. In a work environment where operators often switch from machine to machine it is key to have a control where one can be cutting parts quickly, fast and accurately. The CL-900 control excels in this area. The CINCINNATI HMI has a touch screen display, easy to understand buttons and a full size keyboard. Using the Windows Operating System, the operator feels right at home. A web cam is available for easy monitoring of the cutting process. Rather than using cumbersome tech tables, the CL-900 uses Dynamic Power Control (DPC), which computes optimum power and the fastest possible cutting speed for any material on the fly.

  • Similar Machines
  • New
  • Used
  • OEM Brochure
  • Shipping
  • Manufacturer
Similar Machines New Used OEM Brochure Shipping Manufacturer

* Temporary specifications subject to verification.

   All quotations subject to prior sale.