Last Updated :Thu, Apr 09, 2020

All Machines   >   Drills  >   Radial
4' x 11" Brand New Jet Radial Arm Drill , Mdl. J-1230R, The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads, The spindle is made of finest case hardened steel, for extra strength and wear, The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top, Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy, Arm raising safety device prevents arm from dropping, Counter balanced mechanism for spindle return, 12 Speeds/3 Feed Rates, Centralized control center, Automatic Tool Ejector, Independent arm electric clamping system, which locks and unlocks the head and column, Built in Work Light, Coolant Pump, Box Table, Entire frame is made of Meehanite and high tensile strength cast iron to handle the haviest of jobs, Electrical circuits are located in the build-in control box at the rear of the arm. This keeps the controls dust-and-humidity-free while making them easilly accessible for maintenance, Push botton controls are all reduced to 110VAC, Tool Kit, Jet Red Assurance 2-Year Warranty, #SMJ1230R

Brand New Jet Radial Arm Drill

Stock No: #SMJ1230R
Manufacturer: Jet
Model: J-1230R
Capacity: 4' x 11"
Condition: New Machinery
Starting At:
$25,999.00
financing
FINANCING
AS LOW AS
$533.24

MONTH
discount img
DETAILED SPECIFICATION
Capacity4' x 11"
Quill Travel with Powerfeed Engaged 9-7/16"
Quill Down Feed Rates 3: 0.002", 0.004", 0.006"
Spindle TaperMT4
Number Of Spindle Speeds12 (44-1500)
Drilling Capacity (Mild Steel)1-7/8"
Drilling Capacity (Cast Iron) 2-5/16"
Tapping Capacity (Mild Steel)1"
Tapping Capacity (Cast Iron) 1-1/2"
Boring Capacity (Steel)3-3/8"
Boring Capacity (Cast Iron)4-3/4"
Column Diameter11-13/16"
Distance Spindle to Column 13-3/4" (minimum)
Distance Spindle to Column 46" (maximum)
Travel of Head Horizontal35"
Distance Base to Spindle19-3/8" (minimum) to 54"
Arm Vertical Travel35"
Voltage230V
EQUIPPED WITH
The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
The spindle is made of finest case hardened steel, for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
12 Speeds/3 Feed Rates
Centralized control center
Automatic Tool Ejector
Independent arm electric clamping system, which locks and unlocks the head and column
Built in Work Light
Coolant Pump
Box Table
Entire frame is made of Meehanite and high tensile strength cast iron to handle the haviest of jobs
Electrical circuits are located in the build-in control box at the rear of the arm. This keeps the controls dust-and-humidity-free while making them easilly accessible for maintenance
Push botton controls are all reduced to 110VAC
Tool Kit
Jet Red Assurance 2-Year Warranty
  • Similar Machines
  • New
  • Used
  • OEM Brochure
  • Shipping
  • Manufacturer
Similar Machines New Used OEM Brochure Shipping Manufacturer

* Temporary specifications subject to verification.

   All quotations subject to prior sale.