The CNC150 is an economical, simple to use control that incorporates the most popular features used in our 30-plus years experience in the pressbrake backgauging industry. It offers 150 job memory storage with up to 20 bends per job. The CNC150 will control any of the backgauge configurations allowing the operator to form the complete workpiece in one handling by controlling the backgauge, ram depth and gauge bar height of each bend.
The CNC150 is our most popular control and is a simple low-cost way to improve your pressbrake productivity. Productivity increases of over 40% are typical when using this system over manual gauging. While simple, the CNC150 still offers enhanced features like reversal on pinch point and backgauge retract and delays. On 2-Axis hydraulic brakes backgauge retract on pinch point allows you to program the backgauge to retract once the workpiece is pinched in order to clear reverse bends. The backgauge retract/delay feature allows the operator to program the backgauge to retract away from the die a specified time and distance to allow the operator time to reposition the workpiece. Both the time and distance of retract can be programmed separately for each bend.
All electronics are housed in a single control panel featuring easy to read LED’s. The velvet-lexan front panel features high-feedback tactile feel pushbuttons. A parts counter keeps track of total parts formed and can be viewed simply by pressing one button. When you release the button you automatically return to the program. A ram offset ± .393” and bend allowance of ± .393" can be programmed for each job to offset all dimensions in the program by the same amount.
The CNC150 backgauge system comes with a two-year warranty.
Add Ram Axis:
Category 1 - Accurpress, Allsteel, Cincinnati, D&K, DiAcro, HTC, Hydrapower,
Niagara, Pacific, Piranha, Standard, Tri-Acro, Wysong MTH,
Wysong Rotary $5,510.00
Category 2 - Adira up-acting, Amada, Guifil, Komatsu, Promecam $6,765.00
Category 5 - Adira down-acting, AFM, Atlantic, Betenbender, Clausing, GFM,
Heller, LVD, Wolf $7,265.00
Category 6 - Accurpress ETS style control $5,510.00
NOTE: GF-9 Fingers will be provided on low profile P models and GF-8 Fingers will be provided on all other models unless
For G24B, G24HD (Programmable gauge Bar) $5,510.00
For G48HD, G24TD (Programmable gauge Bar) $6,265.00
For G48TD (Programmable gauge Bar) $6,765.00
DP-4 Pendant Mount Assembly $ 435.00
** Extra Length Linear Scale (24” travel) for Cat 1 Ram Axis (add) $ 520.00
Extra Pair GF-8 or GF-9 Finger Assembly $ 570.00
G48 Rollaway Option (available only on G48 systems) $ 5,635.00
G48 Tilt-Down Feature (available only on G48 systems) $ 5,480.00
Pinch Point Switch Assembly $ 660.00
**NOTE: Standard ram scale is 12”. If ram travel exceeds 12”, the Extra Length 24” Linear Scale must be ordered.**
Standard 1-Axis or 2-Axis Category 1 Systems $3,390.00
2-Axis Cat 2 and Cat 5, 3-Axis, G48, Triple Drive or Front/Rear Combo Systems $3,750.00
Removal of Existing Backgauge $ 785.00