- 9 Bends per Job
- 9 Cycles per bend
- 1/2" LCD Display
- Bend allowance ± .999”
- Gauge Offset - All backgauge dimensions can be offset ± .999” with one data entry.
- .001” resolution
- IN/MM conversion
- Tactile feel pushbuttons
- 5 Year flash memory backup
- 20" or 24”Backgauge
- Input power - 115 VAC ± 10% 50/60 HZ, 1A MAX (Control)
- Contol size - Height 8 1/3" x Width 10" x Depth 2 1/4"
- 2 year warranty
The CNC9x9 backgauge system is a simple-to-use 9 bend, single axis system that was developed as a low cost solution to be used with Automec’s series of backgauges for pressbrakes. The system comes with a two year warranty.
The typical CNC9x9 user bends simple parts. The system can be used for single bend “go to” positioning or sequential bending of up to 9 bends with up to 9 repeats of identical bends.
The CNC9x9 backgauge system retains the same speed, accuracy, and repeatability as provided by Automec’s higher end controls at a more affordable price. The system also features bend allowance and inch/mm conversion. The operator can display backgauge position, bend number, and cycles per bend. Error messages appear when unattainable dimensions are entered and all backgauge dimensions can be offset ± .999” with one data entry.
The CNC9x9 backgauge system consists of a mechanical gauging mechanism, controller, gauge bar, (2) flip fingers, instruction manual, interconnect cables and mounting hardware.
The CNC9x9 is also offered as a control only upgrade for our customers looking to replace their old G24 controls.