|Punching Tonnage||66 Ton|
|Length of Bed & Ram||72"|
|Distance Between Housings||4'-5"|
|Shipping Weight||12,000 lbs|
|Standard Industrial is 100% Owned, Operated and Manufactured In The U.S.A.
|Unheard of Factory and Dealer Service and Support
|Full-Tonnage Throughout Stroke
|Typical 30+ Year Lifetime, Plus a Lifetime of Parts and Service Availability
|Solid, Non-Moveable Lower Beam Substantially More Rigid Than "Bed Level" press Brakes
|± 0.001" Ram Repeatability
|Off-center loading Capability
|The Most Heavy Duty Press Brake Built In The U.S.A.
|Extremely Heavy-Duty lower beams allowing the least amount of deflection. Less Deflection = Longer Tool Life = More Profitability.
Additional information:Standard brakes were specifically designed for the following applications
Full length bends where full tonnage across the bed is a necessity for the truest bends
Off-center loading when any amount of the brakes tonnage is needed across the bed
Center loading where any amount of the brakes tonnage is required
Multiple die set-ups across the bed that require varying amounts of tonnage
Punching applications in one area or at varied locations across the bed - each brake has a counter balance valve to allow the least shock to the hydraulic system
Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision.
Any Size Facility will benefit for the Standard Industrial brake from the price conscious smaller facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtimeWhy It Is Important For You To Buy A Standard Industrial Press Brake
Standard Industrial is 100% Owned, Operated and Manufactured In The U.S.A.
5 Year Across The Board Parts and Limited Labor Warranty
Unheard of Factory and Dealer Service and Support
Full-Tonnage Throughout Stroke
Typical 30+ Year Lifetime, Plus a Lifetime of Parts and Service Availability
Solid, Non-Moveable Lower Beam Substantially More Rigid Than "Bed Level" press Brakes
± 0.001" Ram Repeatability
Off-center loading Capability
The Most Heavy Duty Press Brake Built In The U.S.A.
Extremely Heavy-Duty lower beams allowing the least amount of deflection. Less Deflection = Longer Tool Life = More Profitability.
Groove in bed for tooling is standard on all brakes.
All Components are readily available from your local suppliers and are covered by our 5 year warranty
All parts will be readily available for a lifetime from anywhere in the U.S.A.
Precision mechanical in-line depth stop as back-up for any CNC control
The in-line depth stop insures NO Down-Time due to computer failure.