19
64″ x 120″ Brand New Birmingham Precision Heavy Duty Engine Lathe, Mdl. HTL64120/W6, 39″ 4 Jaw Chuck, Dead Center, Center Sleeve, Thread Chasing Dial, 2-3/4″ to 19″ Steady Rest, 2″ to 9″ Follow Rest, 4 Way Tool Post, Coolant System, Halogen Work Light, Manual Tailstock, Foundation Bolts, Tools, Made in China, #SMHTL64120W6
Brand New, LathesTags: large lathe, lathe, LathesNo brands
64″ x 120″ Brand New Birmingham Precision Heavy Duty Engine Lathe, Mdl. HTL64120/W6, 39″ 4 Jaw Chuck, Dead Center, Center Sleeve, Thread Chasing Dial, 2-3/4″ to 19″ Steady Rest, 2″ to 9″ Follow Rest, 4 Way Tool Post, Coolant System, Halogen Work Light, Manual Tailstock, Foundation Bolts, Tools, Made in China, #SMHTL64120W6
http://www.sterlingmachinery.com/10653/Birmingham+HTL64120/W6/
Full Description
Capacity: | 64″ x 120″ |
Swing Over Bed: | 32″ |
Swing Over Cross Slide: | 49″ |
Distance Between Centers: | 120″ |
Max. Weight of Work Piece: | 13,200 Lbs. |
Width of Bed: | 29-3/4″ |
Swing Over Cross Slide: | 22-1/2″ |
Hole Thru Spindle: | 5-1/8″ |
Max Travel of Top Slide: | 12″ |
Cross Slide Travel: | 25″ |
Tool post Swing Angle: | 16-1/2″ |
Spindle Nose: | A2-15 |
Tailstock Quill Travel: | 12″ |
Tailstock Quill Taper: | #6 MT |
Spindle Speeds: | 3.78 – 378 RPM |
Cross Rapid Speed: | 73-3/4″/min |
Longitudinal Rapid Speed: | 147-1/2″/min |
Spindle Taper: | MT #140 |
Feeds |
|
Longitudinal Feeds: | 0.1 – 12 mm/rev |
Traverse Feed: | 0.05 – 6 mm/rev |
Inch Threads: | 1/4 – 28 TPI |
Metric Threads: | 1 120 mm |
Diametrical Pitches: | 1/2 – 56 TPI |
Modular Pitches: | 0.5 – 60 mm |
Up Tool Post Feed Range: | 0.025 – 3 mm/rev |
Horsepower: | 30 H.P. |
Voltage |
|
Dimensions (L x W x H): | 21′ x 6′ x 7′ |
Weight: | 31, 000 Lbs. |
No comments yet.
Leave a comment
« 5′ x 10′ Brand New EZ Cut Turn-Key CNC Plasma Cutting Systems, Mdl. EZ Cut 8000, CNC Controller, 15″ Integrated Laptop, Computer Stand, Controller, and X-Axis Tracking, CAD Drawing, CAM Cutting Software included., Automatic Torch Height Control, Ohmic and Touch Pressure Sensors for Surface Detection, Self Cleaning Bolted V-Guides, Automatic Torch Height Control (ATHC), Enclosed Precision Rack and Pinon, X(a), X(b), Y, and Z Table Boundaries Are Set By Electronic Optical Proximity Sensors, 3:1 Gear Reduction for Smooth Motion, Gantry & Carriage, Base, End Trucks, Bearings, Drive Motor System, Zero Backlash Gearbox, On-Site Training, Made In The USA & Canada, #SMEZCUT8000 | 6′ x 12′ Brand New EZ Cut Turn-Key CNC Plasma Cutting Systems, Mdl. Ez Cut 11000, CNC Controller, 15″ Integrated Laptop, Computer Stand, Controller, and X-Axis Tracking, CAD Drawing, CAM Cutting Software included., Automatic Torch Height Control, Ohmic and Touch Pressure Sensors for Surface Detection, Self Cleaning Bolted V-Guides, Automatic Torch Height Control (ATHC), Enclosed Precision Rack and Pinon, X(a), X(b), Y, and Z Table Boundaries Are Set By Electronic Optical Proximity Sensors, 3:1 Gear Reduction for Smooth Motion, Gantry & Carriage, Base, End Trucks, Bearings, Drive Motor System, Zero Backlash Gearbox, On-Site Training, Made In The USA & Canada, #SMEZCUT11000 »