7
14″/19″ x 40″ Brand New Birmingham Precision (Gap Bed) Tool Room Lathe, Mdl. YCL-1440KGY, 6″ 3 Jaw Chuck, 8″ 4 Jaw Chuck, 10″ Face Plate, 2-3/4″ Steady Rest, 2-1/3″ Follow Rest, Thread Chasing Dial, (2) Dead Centers, Reducing Headstock Sleeve, Removable Gap, Full Length Splash Guard, Chip Tray, Foot Brake, Halogen Work Light, Coolant System, Stand, 4 Way Tool Post, #SMYCL1440KGY
Lathes, Machinery, machines, saleTags: 14"/19" x 40" Brand New Birmingham Precision (Gap Bed) Tool Room Lathe, birmingham, brand new, gap bed, lathe, precision lathe, tooling roomNo brands
14″/19″ x 40″ Brand New Birmingham Precision (Gap Bed) Tool Room Lathe, Mdl. YCL-1440KGY, 6″ 3 Jaw Chuck, 8″ 4 Jaw Chuck, 10″ Face Plate, 2-3/4″ Steady Rest, 2-1/3″ Follow Rest, Thread Chasing Dial, (2) Dead Centers, Reducing Headstock Sleeve, Removable Gap, Full Length Splash Guard, Chip Tray, Foot Brake, Halogen Work Light, Coolant System, Stand, 4 Way Tool Post, #SMYCL1440KGY
http://www.sterlingmachinery.com/10244/Birmingham+YCL-1440KGY/
Full Description
Capacity: | 14″/19-3/4″ x 40″ |
Swing Over Bed: | 14″ |
Swing Over Cross Slide: | 8-13/16″ |
Swing In Gap: | 19-3/4″ |
Distance Between Centers: | 40″ |
Hole Thru Spindle: | 1-1/2″ |
Center Height: | 7″ |
Headstock |
|
Spindle Nose: | D1-4 |
Spindle Speeds: | 70 – 2000 RPM |
Spindle Taper: | MT #5 |
Feeds & Threads |
|
Longitudinal Feeds: | .00168 – .1175″/rev |
Cross Feeds: | .00046 – .03231″/rev |
Metric Threads: | 0.1 – 7mm (34 Kinds) |
Inch Threads: | 4 – 112 TPI |
Modular Pitches: | 0.1 – 1.75 MP |
Diametrical Pitches: | 16 – 112 DP |
Carriage |
|
Max. Travel of Cross Slide: | 6″ |
Max. Travel of Compound Rest: | 3-9/16″ |
4 Way Tool Post Size: | 5/8″ x 5/8″ |
Longitudinal Leadscrew Diameter/Pitch: | 3/4″/ 8 TPI |
Tailstock |
|
Diameter: | 1-1/4″ |
Taper of Center: | MT #3 |
Travel: | 3-15/16″ |
Collet Closer: | No |
Digital Readout: | No |
Tracer Attachment: | No |
Horsepower: | 2 H.P. |
Voltage: | 220V ~ 1 Phase |
Dimensions (W x D x H): | 67″ x 30″ x 61″ |
Weight: | 1,500 Lbs. |
No comments yet.
Leave a comment
« 12″ x 54″ New Acra Milling Machine With Inverter Head Speed Control, Mdl. AM3VVAC, Hardened & Ground Table & Ways, Double Wall Construction, Turcite On The Table X & Y Axis, Quill Heat Treat Hardened & Chromed, #SMAM3VVAC | 11″ x 18″ Used Hardinge Precision Tool Room Lathe With Inch & Metric Threading, Mdl. HLV-EM, Trak 2 Axis Digital Readout, Inch/Metric Threading, Taper Attachment, Aloris Tool Post, Coolant Pump, Drill Chuck, Hardinge 3 Jaw Chuck, 2- Racks Of 5C Collets, Work Light, 5C Collet Closer, #A4111 »