Popular Search
      Webcam
 Fabricating | Chipmaking
Last Updated: Tue, Apr 25, 2017
Search By:      MANUFACTURER   |    CATEGORY   |    MODEL
Sterling Machinery Exchange
Sterling Machinery Exchange
Sterling Machinery Exchange  Sterling Machinery Exchange  Sterling Machinery Exchange  Sterling Machinery Exchange  Sterling Machinery Exchange Sterling Machinery Exchange

Machinery and Equipment For Sale
Atrump (109)
more pictures
Compare

30" x 40" Brand New Atrump CNC Turning (Wheel - Rim) Flat Bed Lathe, Mdl. , Centroid T400i Control with 15" LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" Through Hole Spindle, Maximum 2,200 RPM Spindle Speed With Auto Shift 3 Gear Range, Hardened & Ground With Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, USB 2.0 Port, Halogen Work Light, Full Enclosed Guarding, Coolant System, Leveling Bolts, USB 2.0 Port, 60 GB Solid State Hard Drive, SIngle Position Quick Change Tool Post, Shop Floor Programming/Conversational, Digitizing Package with Software, 1 Day of Training and Set-Up, On-Site, 12" 3 Jaw Chuck, Dual Hand Wheel for Manual Operation, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Meehanite Casting Main Frame with Annealed & Stress Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, 14" Wide Bed Ways Design to Provide Maximum Rigidity & Stability, Massive One Piece Casting Construction for Maximum Cutting Performance, #SMRL3040NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
RL-3040NC
Capacity: 30" x 40"
Stock: #SMRL3040NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Basic Dimensions
Height Of Centers: 15"
Swing Over Bed: 30"
Swing Over Cross Slide: 16"
Distance Between Centers: 40"
Bed Width: 13.78"
.
Spindle
Spindle Nose: D1-8
Spindle Bore: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High - Middle - Low
.: 2200~491 - 490~125 - 124~27 rpm
Z-Axis Travel: 31.5"
X-Axis Travel: 11.6"
Rapid Traverse: 270 IPM
Cutting Feed Rate: 120 IPM
.
Tool
Maximum Cutting Tool Size: 1"
.
Oil Types
Ways: Mobil Vectra #2
Coolant: Mobil 1 Gear
Pneumatic: Air Tool Oil
.
Controller: Centroid
CNC Axis: 2
Coolant Tank Capacity: 3.5 Gallons
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Power Requirements: 20 H.P., 3 Phase, 208V to 230V (Max)
Dimensions (W x D x H)
Weight: 7,200 Lbs.
Register to Discount
$73,755
Finance As Low As
$1,509.76 Per Mo.*
more pictures
Compare

24" x 40" Brand New Atrump CNC (Wheel - Rim) Turning Flat Bed Lathe, Mdl. RL-2440NC, Coolant System, USB 2.0 Port, Operation Manual, Automatic Lube System, Tool Box & Tools, 12" 3 Jaw Chuck, RS-232 Interface, Full Guarding, Leveling Bolts & Plate, Halogen Work Light, Centroid T400I Control with 15" LCD, 60 GB Solid State Hard Drive, Single Position Quick Change Tool Post, Shop Floor Programming/Conversational, Digitizing Package with Software, 1 Day of Training & Set-Up, On Site, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14" Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, #SMRL2440NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
RL-2440NC
Capacity: 24" x 40"
Stock: #SMRL2440NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Basic Dimensions
Height Of Centers: 12"
Swing Over Bed: 24"
Swing Over Cross Slide: 16"
Distance Between Centers: 40"
Bed Width: 13.78"
.
Spindle
Spindle Nose: D1-8
Spindle Bore: 3-3/8"
Spindle Taper: MT #7
Range of Spindle Speeds: Auto Shift High - Middle - Low
  2200~491 - 490~125 - 124~27 rpm
Z-Axis Travel: 31.5"
X-Axis Travel: 11.6"
Rapid Traverse: 180 IPM
Cutting Feed Rate: 120 IPM
.
Tool
Maximum Cutting Tool Size: 1"
.
CNC Axis: 2
Controller: Centroid
Ways: Mobil Vectra #2
Coolant Tank Capacity: 3.5 Gallons
Coolant: Mobil 1 Gear
Pneumatic: Air Tool Oil
Power Requirements: 20 H.P., 3 Phase, 208V to 230V (Max)
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Dimensions ( L x W x H)
Weight: 7,000 Lbs.
Register to Discount
Starting At $69,500
Finance As Low As
$1,422.67 Per Mo.*
more pictures

videos
Compare

9" x 49" Brand New Atrump Variable Speed Vertical Milling Machine "Bridgeport Copy", Mdl. AONE 2VSG, One Shot Lube System, Built-In Quartz Work Light, Hardened & Grounded With Turcite-B Coating Guide Ways, Precision APEC Class 7 Spindle Bearing To Ensure Spindle Run Within 0.0002, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Tool Box W/Tools, China Casting Finished In Taiwan, R-8 Spindle, 3 H.P. Motor, Circuit Breaker Instead Of Fuse Box, Made in China/Taiwan, #SMAONE2VSG

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
AONE 2VSG
Capacity: 9" x 49"
Stock: #SMAONE2VSG
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table size: 9" x 49"
Longitudinal Travel (X Axis): 36"
Cross Travel (Y Axis): 12"
Vertical Knee Travel (Z Axis): 16"
Ram Travel: 12"
Spindle Taper: R-8
Speed Selector: Variable Speed
Spindle Speeds: 70 - 4,200 RPM
Quill Diameter: 3.37"
Quill Travel: 5"
Quill Feeds (3): 0.002", 0.004", 0.006"
Head Moves Right to Left: 90°
Head Tilts front to Back: 45°
Load Capacity: 600 Lbs.
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x D x H): 101" x 70" x 82"
Weight: 2,200 Lbs.
Register to Discount
Starting At $7,450
Finance As Low As
$152.50 Per Mo.*
more pictures
Compare

26" x 16" x 20" Brand New Atrump Vertical CNC Machining Center, Mdl. E216 Maxi-Mill, Coolant System, Air Blast System, Central Lubrication System, USB 2.0 Port, Leveling Bolts & Plate, Hardened & Ground with Turcite-B Coating Guide Way, 100% Laser Tested for Positioning Accuracy & Repeatability, Tool Box & Tools, Operation Manual, #SME216MAXIMILL

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
E216 Maxi-Mill
Capacity: 26" x 16" x 20"
Stock: #SME216MAXIMILL
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Table Size: 14.2" x 34.4"
Longitudinal Travel (X): 26"
Cross Travel (Y): 16.1"
Vertical Head Travel (Z): 20.1"
Load Capacity: 900 Lbs.
Spindle Nose To Table Top: 4.1" - 24.2"
Spindle Taper: BT 40 or CAT 40
Spindle To Column: 17.7"
Spindle Speed: 6,000
Feed Rates
Rapid Feed Rate: X: 150 IPM DC, Y: 150 IPM DC, Z: 320 IPM AC
Cutting Feed Rate: X: 1 - 120 DC, Y: 1- 120 IPM DC, Z: 150 IPM AC
CNC Axis: 3
Controller: Centroid
Automatic Tool Changer
Max. Tool Diameter: 3.54"
Number Of Tool Stations: 16
Max. Tool Weight: 15 lbs.
Voltage
Axis Motor: 1kW-AC
Horsepower: 7.5 H.P.
Dimensions (W x D x H): 91" x 84" x 91"
Weight: 7,000 Lbs.
Register to Discount
$50,270
Finance As Low As
$1,029.03 Per Mo.*
more pictures

videos
Compare

15" x 9" x 13" Brand New Atrump Space Saver 3 Axis CNC Machining Center W/ Automatic Tool Changer, Mdl. Space Saver S8, Centroid M400i Control with 15" LCD, 8 Tools ATC Armless, 1.5 H.P. Spindle Motor, BT30 Spindle Taper, 8000 RPM Spindle Speed, 3 Axes Linear Guide Way, Precision Ball Screws for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Coolant System, Air Blast System, Central Lubrication System, Leveling Bolts & Blocks, Full Enclosure, Halogen Work Light, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMSPACESAVERS8

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
Space Saver S8
Capacity: 15" x 9" x 13"
Stock: #SMSPACESAVERS8
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Table Size: 9.45" X 32"
Longitudinal Travel (X): 15.37"
Cross Travel (Y): 9.45"
Vertical Head Travel (Z): 13.75"
Load Capacity: 220 Lbs.
.
Spindle Nose To Table Top: 1.18" to 14.95"
Spindle Taper: BT 30
Spindle Speeds: 8000 RPM
.
Feed Rates
X Axis: 300 IPM
Y Axis: 300 IPM
Z Axis: 300 IPM
Cutting Feed Rates: 1 - 100 IPM
.
Automatic Tool Changer
Number Of Tool Stations: 8
Max. Tool Diameter: 2"
.
Air Requirement: 90 - 100 PSI
Horsepower: 10 H.P.
Voltage: 280V ~ 3 Phase
Dimensions (W x D x H): 74" x 48" x 79"
Weight: 2,700 Lbs.
Register to Discount
$29,960
Finance As Low As
$613.28 Per Mo.*
more pictures
Compare

4" x 19" Brand New Atrump CNC Turning Flat Bed Lathe, Mdl. S25L, Centroid T400I Control with 15" LCD, 3 H.P. Spindle Motor, 1.0" Through Hole Spindle, Rigid Cartridge Spindle Maximum 6000 rpm Spindle Speed, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, Precision Linear Guide Ways on X and Z Axis, Massive One Piece Casting Construction for Maximum Cutting Performance, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, 100% Laser Tested for Positioning Accuracy & Repeatability, Dual Hand Wheel for Manual Operation, Central Lubrication System, Coolant System, Shop Floor Programming/Conversational, Full Guarding, Leveling Bolts & Plate, Halogen Work Light, RS232 Port, USB 2.0 Port, 60 GB Solid State Hard Drive, 4 pcs Gang Tool Set, Tool Box & Tools, Operation Manual, 1 Day of Training & Set-Up, On Site, #SMS25L

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
S25L
Capacity: 4" x 19"
Stock: #SMS25L
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Basic Dimensions
Max. Turning Diameter: 0.984"
Swing Over Saddle: 19.7"
.
Bed: Flat Bed
Guide Way: Linear on X and Z Axis
.
Spindle
Spindle Nose Mounting: 25 Collect Chuck
Max. Bar Capacity: 0.984"
Range of Spindle Speeds: 50 to 6000 rpm
Longitudinal Travel (Z Axis): 6.2"
Cross Slide Travel (X Axis): 7.8"
Rapid Travel/Cutting Feed Rate: 400/120 ipm
.
Tool
I.D. Cutting Tool (Boring): 5/8"
O.D. Cutting (Turning): 5/8"
.
Motor
Main Spindle Motor: 3 H.P.
.
CNC Axis: 2
Controller: Centroid
Coolant Tank Capacity: 20 Gallons
Horsepower: 3.H.P
Power Requirements: 10 H.P., 3 Phase, 208V to 230V (Max)
.
Dimensions (W x D x H): 44" x 63" x 92"
Crate Dimensions (L x W x H): 49" x 68" x 67"
Weight: 3,100 Lbs.
Warranty: One Year Limited Warranty
Register to Discount
$44,795
Finance As Low As
$916.95 Per Mo.*
more pictures
Compare

43" x 24" x 27" Brand New Atrump Vertical CNC Machining Center, Mdl. M422W, Centroid M400 Control with 15" LCD, 20 Tools ATC Armless, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, Telescopic Steel Way Covers On All Three Axes, Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, 100% Laser Tested for Positioning Accuracy & Repeatability, USB 2.0 Port, RS232 Port, 1gb Solid State Hard Drive, Coolant System, Air Blast System, Central Lubrication System, Full Guarding, Leveling Bolts & Plate, Tool Box & Tools, Operation Manual, #SMM422W

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
M422W
Capacity: 43" x 24" x 27"
Stock: #SMM422W
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Tabel Size: 20" x 49"
Load Capacity: 2,200 Lbs.
Longitudinal Travel (X): 43"
Cross Travel (Y): 24"
Vertical Head Travel (Z): 24"
Spindle Nose To Table Top: 5" - 32.6"
Spindle To Column: 25.6"
Spindle Taper: BT 40 or CAT 40
Spindle Speed: 8,000 RPM
Feed Rates
Rapid Feed Rate: X: 640 IPM, Y: 640 IPM, Z: 480 IPM
Cutting Feed Rate: 1 ~ 300 IPM
CNC Axis: 3
Controller: Centroid
Automatic Tool Changer
Max. Tool Diameter: 3.5"
Number Of Tool Stations: 20
Max. Tool Weight: 15 lbs.
Coolant Capacity: 36 Gallons
Oil Types
Coolant: Shell Tellus 32
Pneumatic: Air Tool Oil
Ways: Mobil Vectra #2
Voltage
Horsepower: 15 H.P.
Dimensions (W x D x H): 91" x 84" x 91"
Weight: 13,000 Lbs.
Register to Discount
$99,550
Finance As Low As
$2,037.79 Per Mo.*
more pictures
Compare

98" x 33" x 27" Brand New Atrump Vertical CNC Machining Center, Mdl. BM-780H, Centroid M400 Control with 15" LCD, 20 Tools ATC Armless, 20 H.P. Spindle Motor, BT40 or CAT40 Spindle Taper, Hardened & Ground with Turcite-B Coating Guide Way, FC30 Meehanite Casting Main Frame, Box Ways Design on Y Axis, Telescopic Steel Way Covers on all Three Axes, Table Guard, Leveling Bolts & Plate, Splash Guard, Halogen Work Light, Auto Lube/Coolant System, Air Blast & Coolant Flush Gun, USB 2.0 Port, RS-232 Interface, 120 GB Solid State Hard Drive, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMBM780H

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
BM-780H
Capacity: 98" x 33" x 27"
Stock: #SMBM780H
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Table Size: 32" x 108"
Load Capacity: 4,400 Lbs.
Longitudinal Travel (X): 98"
Cross Travel (Y): 33"
Vertical Head Travel (Z): 27.5"
Spindle Nose To Table Top: 3.9" - 31.4"
Spindle To Column: 35.4"
Spindle Taper: BT 40 or CAT 40
Spindle Speed: 8,000 RPM
.
Feed Rates
Rapid Feed Rate: 400 IPM AC
Cutting Feed Rate: 100 IPM AC
.
CNC Axis: 3
Controller: Centroid
.
Automatic Tool Changer
Number Of Tool Stations: 20
Max. Tool Diameter: 3.54"
Max. Tool Weight: 15.4 lbs
.
Coolant Capacity: 26 Gallons
.
Oil Types
Coolant: Shell Tellus 32
Pneumatic: Air Tool Oil
Ways: Mobil Vectra #2
.
Motor
Spindle Motor: 20 H.P.
Feed Motors on XYZ: 4 H.P.
Coolant Pump: 1/4 H.P.
Lubrication Pump: 150W
.
Horsepower: 20 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (W x D x H): 195" x 186" x 119"
Weight: 23,000 Lbs.
Register to Discount
$146,800
Finance As Low As
$3,005.00 Per Mo.*
more pictures
Compare

12" x 60" Brand New Atrump CNC Vertical Knee Milling Machine, Mdl. 5NC 3-Axis Rigid Head, Centroid M400i Control with 15" Color LCD, MPG 100 Steps Mounted On Head, Hard Limit Switch, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Anti-Rust Chrome Quill, Auto Lubrication System, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Coolant System, USB 2.0 Port, 60 GB Solid State Hard Drive, RS-232 Interface, Chip Tray, Leveling Bolts & Plate, 5 H.P. Spindle Motor, #40 Spindle Taper, Programmable 4000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B Coating Guide Way, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Tool Box W/Tools, Operation Manuals, #SM5NC3AX

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
5NC 3-Axis Rigid Head
Capacity: 12" x 60"
Stock: #SM5NC3AX
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table size: 12" x 60"
Longitudinal Travel: 38"
Cross Travel: 16.5"
Spindle Quill Travel: 5.5"
Knee Travel: 16.5" (Manual)
Spindle Taper: # 40
Spindle Speeds: 70 - 4,000 RPM
Spindle To Table: 2-1/4" ~ 21-3/4"
Spindle Center To Column Front Surface: 6-3/8" ~ 27"
Spindle Nose To Table Top: 2-1/4" to 21-3/4"
Quill Diameter: 4"
Controller: Centroid
CNC Axis: 3 Axis
Transmission Of Spindle & Motor: Timing Belt
Power Draw Bar: No
Speed Selector: Variable Speed
Load Capacity: 1000 lbs
Coolant Tank Capacity: 7 Gallons
Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Voltage: 208/230V - 3 Phase
Dimensions (W x D x H): 124" x 75" x 92"
Weight: 4,580 Lbs.
Register to Discount
$36,815
Finance As Low As
$753.60 Per Mo.*
more pictures
Compare

33" x 24" x 28" Brand New Atrump Horizontal Machining Center, Mdl. LH-87 Centriod, Centroid M400 Control with 15" LCD, 24 Tools Swing Arm ATC, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, Telescopic Steel Way Covers On All Three Axes, Built In 4 Axis 20" Rotary Table with 1 Degree Indexing, Anti-Flex Reinforced Base & Column, Coolant System, USB 2.0 Port, RS232 Port, Air Blast System, Central Lubrication System, Full Guarding, Built-In Quartz Work Light, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, Heavy Duty 3 Axis Linear Guide Way, Leveling Bolts & Plate, Tool Box & Tools, Operation Manual, #SMLH87CC

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
LH-87 Centriod
Capacity: 33" x 24" x 28"
Stock: #SMLH87CC
Category: Machining Centers
Subcategory: Horizontal, CNC
Condition: New Machinery
Tabel Size: 19.6" x 36"
Load Capacity: 880 Lbs.
Longitudinal Travel: 33.8"
Cross Travel: 24.6"
Vertical Head Travel: 28.3"
Spindle Nose To Table Top: 4" - 32.3"
Spindle Nose to Table Center: 6.2" - 30.9"
Spindle Taper: BT 40 or CAT 40
Spindle Speed: 6,000 RPM
Feed Rates
Rapid Feed Rate: X: 960 IPM AC, Z: 960 IPM AC, Y: 800 IPM
Cutting Feed Rate: 1 - 400 IPM
CNC Axis: 3
Controller: Centroid
Automatic Tool Changer
Number Of Tool Stations: 24 Arm Type
Max. Tool Diameter: 3.14"
Max. Tool Weight: 15 lbs.
Coolant Capacity: 36 Gallons
Oil Types
Coolant: Shell Tellus 32
Pneumatic: Air Tool Oil
Ways: Mobil Vectra #2
Voltage
Horsepower: 20 H.P.
Dimensions (W x D x H): 112" x 118" x 109"
Weight: 14,000 Lbs.
Register to Discount
$103,920
Finance As Low As
$2,127.24 Per Mo.*
more pictures
Compare

33" x 24" x 28" Brand New Atrump Horizontal Machining Center, Mdl. LH-87 Fanuc Control, Fanuc OI-MD Control with 15" LCD, 24 Tools Swing Arm ATC, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, Telescopic Steel Way Covers On All Three Axes, Built In 4 Axis 20" Rotary Table with 1 Degree Indexing, Anti-Flex Reinforced Base & Column, Coolant System, USB 2.0 Port, RS232 Port, Air Blast System, Central Lubrication System, Full Guarding, Built-In Quartz Work Light, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, Heavy Duty 3 Axis Linear Guide Way, Leveling Bolts & Plate, Tool Box & Tools, Operation Manual, #SMLH87FC

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
Capacity: 33" x 24" x 28"
Stock: #SMLH87FC
Category: Machining Centers
Subcategory: Horizontal, CNC
Condition: New Machinery
Tabel Size: 19.6" x 36"
Load Capacity: 880 Lbs.
Longitudinal Travel: 33.8"
Cross Travel: 24.6"
Vertical Head Travel: 28.3"
Spindle Nose To Table Top: 4" - 32.3"
Spindle Nose to Table Center: 6.2" - 30.9"
Spindle Taper: BT 40 or CAT 40
Spindle Speed: 6,000 RPM
.
Feed Rates
Rapid Feed Rate: X: 960 IPM AC, Z: 960 IPM AC, Y: 800 IPM
Cutting Feed Rate: 1 - 400 IPM
.
CNC Axis: 3
Controller: Fanuc
.
Automatic Tool Changer
Number Of Tool Stations: 24 Arm Type
Max. Tool Diameter: 3.14"
Max. Tool Weight: 15 lbs.
Coolant Capacity: 36 Gallons
.
Oil Types
Coolant: Shell Tellus 32
Pneumatic: Air Tool Oil
Ways: Mobil Vectra #2
.
Horsepower: 20 H.P.
Voltage
Dimensions (W x D x H): 112" x 118" x 109"
Weight: 14,000 Lbs.
Register to Discount
$122,880
Finance As Low As
$2,515.35 Per Mo.*
more pictures
Compare

43" x 35" x 27" Brand New Atrump Horizontal Machining Center with Centroid M400 Control, Mdl. LH-117 Centroid, Centroid M400 Control with 15" LCD, 24 Tools Swing Arm ATC, 25 H.P. Spindle Motor, BT50/CAT50 Spindle Taper, 4,500 rpm Spindle Speed, Heavy Duty 3 Axes Linear Guide Way, Built In Rotary Table, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy/Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy/Repeatability, Anti-Flex Reinforced Base & Column, Telescopic Steel Way Covers on all 3 Axes, Tool Box & Tools, Built In Quartz Work Light, Coolant System, Air Blast System, Central Lubrication System, RS-232 Interface, Automatic Lubrication System, Full Guarding, Leveling Bolts & Plate, Splash Guard, Halogen Work Light, Air Blast, Coolant Flush Gun, Shop Floor Programming/Conversational, Operation Manual, #SMLH117CENTROID

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
LH-117 Centroid
Capacity: 43" x 35" x 27"
Stock: #SMLH117CENTROID
Category: Machining Centers
Subcategory: Horizontal, CNC
Condition: New Machinery
Table Size: 27.6" x 49.6"
Load Capacity: 1,320 Lbs.
Longitudinal Travel: 43.3"
Cross Travel: 35.4"
Vertical Head Travel: 27.6"
Spindle Nose To Table Top: 4.6" - 32.3"
Spindle Nose to Table Center: 7.8" - 43.3"
Spindle Taper: CAT50/BT50
Spindle Speed: 4,500 RPM
.
Feed Rates
Rapid Feed Rate: X: 700 IPM AC, Z: 700 IPM AC, Y: 400 IPM
Cutting Feed Rate: 1 - 360 IPM
.
CNC Axis: 3
Controller: Centroid
.
Automatic Tool Changer
Number Of Tool Stations: 24 Arm Type
Max. Tool Diameter: 3.5"
Max. Tool Weight: 30 Lbs.
.
Oil Types
Coolant: Shell Tellus 32
Pneumatic: Air Tool Oil
Ways: Mobil Vectra #2
.
Coolant Capacity: 36 Gallons
.
Horsepower: 25 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (W x D x H): 117" x 136" x 113"
Weight: 14,200 Lbs.
Register to Discount
Starting At $141,340
Finance As Low As
$2,893.23 Per Mo.*
more pictures
Compare

20" x 15" x 15" Brand New Atrump High Speed Vertical Machining Center, Mdl. L540, Dynapath WinDelta CNC Controller, Heavy Duty 3 Axis Linear Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, 20 Tools ATC Armless, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, Telescopic Steel Way Covers On All Three Axes, 100% Laser Tested for Positioning Accuracy & Repeatability, Central Lubrication System, Coolant System, Air Blast System, Tool Box & Tools, Leveling Bolts & Plate, Operation Manual, Built In 4 Axis 20" Rotary Table with 1 Degree Indexing, Anti-Flex Reinforced Base & Column, USB 2.0 Port, RS232 Port, Full Guarding, Built-In Quartz Work Light, Splash Guard, Alarm Light, MPG, Oil Skimmer, Auto Power Off, Spindle Cooler, Heat Exchange for Electrical Center, Air Guide Way Cover, #SML540

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
L540
Capacity: 20" x 15" x 15"
Stock: #SML540
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Tabel Size: 16.5" x 25.6"
Load Capacity: 660 Lbs.
Longitudinal Travel: 20.5"
Cross Travel: 15.7"
Vertical Head Travel: 15.7"
Spindle Nose To Table Top: 5.12" - 20.87"
Spindle Center to Column Ways: 18.5"
Spindle Taper: BT 40 or CAT 40
Spindle Speed: 10,000 RPM
Feed Rates
Rapid Feed Rate (X/Y/Z): 1,417 IPM
Cutting Feed Rate: 1 - 394 IPM
CNC Axis: 3
Controller: Centroid
Automatic Tool Changer
Number Of Tool Stations: 20 Arm Type
Max. Tool Diameter: 5.9"
Max. Tool Weight: 15.4"
Oil Types
Coolant: Shell Tellus 32
Pneumatic: Air Tool Oil
Ways: Mobil Vectra #2
Voltage
Horsepower: 10 H.P.
Dimensions (W x D x H): 74" x 91" x 105"
Weight: 6,350 Lbs.
Register to Discount
$58,600
Finance As Low As
$1,199.54 Per Mo.*
more pictures
Compare

Brand New Atrump CNC Tool & Cutter Grinder, Mdl. , IPC with 650M 5 Axes Controller with 15" LCD, ISO 9001 Quality Assurance, C3 Precision Ball Screws Hardened & Ground for Higher Accuracy and Long Lasting, Plug Guage for Management Machine Reference Points, Angular Setting Disc for Machine Reference Points, Pressure Dust Container with Filter, 3-Dimensional Model Simulation System, Multiple Pneumatic Collets with Holders, Portable Hand Wheel, Tool Box & Tools, Auto Lube System, Oil Coolant System, 5 Sets of Grinding Wheel Flanges, Full Enclosure, Work Light, Oil & Mist Separators, RS-232 Interface, USB 2.0 Port, Operator Manual, #SMTR520

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
Capacity:
Stock: #SMTR520
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Grinding Range
Max. Tool Diameter: 9.8"
Max. Tool Length: 1.2"
Max. Chuck Diameter: 1.2"
Work Head
Spindle Tapers: HSK-50
Clamping Systems: 80 PSI
Min. Work Head Graduation: 0.001 Degree
Axis Travels
X Axis Linear Motion: 7.8"
Y Axis Linear Motion: 4.3"
Z Axis Linear Motion: 5.5"
C Axis Linear Motion: 360 Degrees
A Axis Linear Motion: -10 Degrees ~ 180 Degrees
Feed Rate of X/Y/Z Axis: 0.01" ~ 236.2"/Min
Coolant Tank Capacity: 60 Gallons
Servo Motor
X Axis Servo Motor: 1 H.P.
Y Axis Servo Motor: 1 H.P.
Z Axis Servo Motor: 1 H.P.
C Axis Servo Motor: 1 H.P.
A Axis Servo Motor: 1 H.P.
Coolant Motor: 3 H.P. & 2 H.P.
Lubrication Pump: 1/8 H.P.
Horsepower: 5 H.P.
CNC Control: IPC with 650M
CNC Axis: 5
Voltage
Dimensions (W x D x H)
Weight: 7,800 Lbs.
Register to Discount
$197,120
Finance As Low As
$4,035.05 Per Mo.*
more pictures
Compare

9" x 49" Brand New Atrump CNC Bed Milling Machine, Mdl. A13T, Centroid M400I Control with 15" Color LCD, Auto Lubrication System, Coolant System, Tool Box W/Tools, X, Y, & Z Axis are Dovetail, Splash Guard, USB 2.0 Port, 60 GB Solid State Hard Drive, Operation Manuals, Leveling Bolts & Plate, RS-232 Interface, Chip Tray, Compression Tapping Software, User Definable Macros And Sub Programs M98 and G65, Cutter Compensation, 4th Axis Software, Halogen Work Light, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Standard Way Covers on All Three Axes, #SMA13T

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
A1-3T
Capacity: 9" x 49"
Stock: #SMA13T
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table size: 9" x 49"
Longitudinal Travel: 28"
Cross Travel: 15.74"
Knee Travel: 19.68"
Saddle Size: 20.07"
Spindle Quill Travel: 5"
Quill Diameter: 3.38"
Spindle Nose to Table Top: 3.93" to 23.62"
Spindle Taper: R8/ NT30
Spindle Speed: 70 to 4200 rpm with Hi/Lo Gear
Load Capacity: 880 lbs
T-Slot: 0.62" x 3" x 2.55"
Transmission Of Spindle & Motor: Timing Belt
Head Swivel (Right/Left): 90 Degrees
.
Controller: Centroid
CNC Axis: 3 Axis
Power Draw Bar: No
Speed Selector: Variable Speed
Horsepower: 3 H.P.
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 150ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 3 H.P.
Servo Motors on XYZ: 0.75 kW/0.75 kW/1 kW - AC
Coolant Pump: 1/8 H.P.
Lubrication Pump: Auto Lubrication
.
Warranty: One Year Limited Warranty
Horsepower: 9 H.P.
Voltage: 208V to 230V ~ 3 Phase
Floor Space (L x W x H): 99" x 102" x 98"
Shipping Dimension (L x W x H): 90" x 68" x 89"
Weight: 3770 lbs
Register to Discount
$29,950
Finance As Low As
$613.08 Per Mo.*
more pictures
Compare

30"/39" x 160" Brand New Atrump Heavy Duty "Gap Bed" Engine Lathe, Mdl. 30160LS, 15" 3 Jaw Chuck with Back Plate, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Tailstock, Steady Rest, Follow Rest, Gap Bed, Foot Brake, Meehanite Casting, Hardened & Ground Bed, Slide Ways & Gears, Rigid, One Piece Thermally Balance Casting Bed, Made In Taiwan, Machine Color is Bridgeport Grey, #SM30160LS

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
30160LS
Capacity: 30"/39" x 160"
Stock: #SM30160LS
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 30"/39" x 160 "
Swing Over Bed: 30"
Swing Over Cross Slide: 22"
Swing In Gap: 39-7/8"
Distance Between Centers: 160"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4-1/16"
Taper of Spindle: MT NO.5
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 7-1/2"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Dimensions (L x W x H): 217" x 59" x 71"
Weight: 11,800 Lbs.
Register to Discount
$46,665
Finance As Low As
$955.23 Per Mo.*
more pictures
Compare

78" x 33" x 27" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-760H, Centroid M400 Control with 15" LCD, 20 Tools ATC Armless, 20 H.P. Spindle Motor, BT40 or CAT40 Spindle Bore, 8000 RPM Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, FC30 Meehanite Casting Main Frame, Box Ways Design on Y Axis, Table Guard, RS-232 Interface, 60GB Solid State Hard Drive, USB 2.0 Port, Shop Floor Programming/Conversational, Leveling Bolts & Plate, Splash Guard, Halogen Work Light, Auto Lube/Coolant System, Air Blast, Coolant Flush Gun, Tools and Tool Box, Operation Manual, #SMBM760H

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
BM-760H
Capacity: 78" x 33" x 27"
Stock: #SMBM760H
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Capacity: 78" x 33" x 27"
X-Axis Travel: 78.5"
Y-Axis Travel: 33"
Z-Axis Travel: 27.5"
Table Size: 32" x 86"
Load Capacity: 4400 lbs
Spindle Nose to Table Top: 3.9" x 31.4"
Spindle Center to Column Front Surface: 35.4"
Spindle Taper: BT40 or CAT40
Spindle Speed: 8,000 RPM
Transmission of Spindle & Motor: Belt Driven
.
Feed Rate
Rapid Feed Rate: 400 ipm AC
Cutting Feed Rate: 100 ipm AC
.
Automatic Tool Changer
Number of Tools: 20
Maximum Tool Diameter: 3.54"
Maximum Tool Weight: 15.4 lbs
.
Coolant Capacity: 26 Gallons
.
Motor
Spindle Motor: 20 H.P.
Feed Motors on XYZ: 4 H.P.
Coolant Pump: 1/4 H.P.
Lubrication Pump: 0.20 H.P. (150 W)
.
Voltage: 208V - 230V ~ 3 Phase
Dimensions (L x W x H): 91" x 165" x 102"
Weight: 16,500 lbs
Register to Discount
Starting At $122,800
Finance As Low As
$2,513.72 Per Mo.*
more pictures
Compare

12" x 60" Brand New Atrump Variable Speed Vertical Milling Machine (Variable Speed) "Bridgeport Copy" INCLUDES DRO AND TABLE FEED, Mdl. 5VK, Power Knee Elevation, One Shot Lube System, Halogen Work Light, Hardened & Grounded With Turcite-B Coating Guide Ways, Precision APEC Class 7 Spindle Bearing To Ensure Spindle Run Within 0.0002, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 5 H.P Motor, Anti-Rust Chrome Quill, Draw Bar 1 Pc., Coolant System, Way Cover, Chip Tray, Leveling Bolts & Plate, Operation Manuals, Tool Box W/Tools, China Casting Finished In Taiwan, Made in China/Taiwan, #SM5VK

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
5VK
Capacity: 12" x 60"
Stock: #SM5VK
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table size: 12" x 60"
Load Capacity: 990 Lbs.
Longitudinal Travel (X Axis): 40"
Cross Travel (Y Axis): 17"
Vertical Knee Travel (Z Axis): 16-5/8"
Ram Travel: 20"
Spindle Taper: N.S.T. #40
Speed Selector: Variable Speed
Spindle Speeds: 70 to 3,900 RPM
Quill Diameter: 4.13"
Quill Travel: 5.5"
Distance From Spindle to Column: 6-3/8" to 23-1/4"
Distance From Spindle to Table: 2-1/4" to 21-7/8"
Horsepower: 5 H.P.
Voltage: 230V ~ 3 Phase
Dimensions (W x D x H): 114" x 71" x 90"
Weight: 4,500 Lbs.
Register to Discount
$16,460
Finance As Low As
$336.94 Per Mo.*
more pictures
Compare

10" x 54" Brand New Atrump Variable Speed Vertical Milling Machine "Bridgeport Copy" , Mdl. AONE 3VHG, One Shot Lube System, Built-In Quartz Work Light, Hardened & Grounded With Turcite-B Coating Guide Ways, Precision APEC Class 7 Spindle Bearing To Ensure Spindle Run Within 0.0002, Made in China/Taiwan, Anti-Rust Chrome Quill, #SMAONE3VHG

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
AONE 3VHG
Capacity: 10" x 54"
Stock: #SMAONE3VHG
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table size: 10" x 54"
Load Capacity: 704 Lbs.
Longitudinal Travel (X Axis): 36.37"
Cross Travel (Y Axis): 15.75"
Vertical Knee Travel (Z Axis): 16"
Ram Travel: 19"
Spindle Taper: R-8
Speed Selector: Variable Speed
Spindle Speeds: 70 - 4,200 RPM
Quill Diameter: 3-3/8"
Quill Travel: 5"
Quill Feeds (3): 0.002", 0.004", 0.006"
Head Moves Right to Left: 90°
Head Tilts front to Back: 45°
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x D x H): 102" x 77" x 84"
Weight: 3,000 Lbs.
Register to Discount
Starting At $9,175
Finance As Low As
$187.81 Per Mo.*
more pictures
Compare

10" x 54" Brand New Atrump CNC Vertical Knee Milling Machine, Mdl. 3VK 2-Axis, Centroid M400I Control with 15" Color LCD, 2-Axis Constant CNC, Shop Floor Programming/ Conversational, Anti-Rust Chrome Quill, Auto Lubrication System, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Coolant System, USB 2.0 Port, 60 GB Solid State Hard Drive, RS-232 Interface, Chip Tray, Built-In Quartz Work Light, Leveling Bolts & Plate, Hardened & Ground with Turcite-B Coating Guide Way, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Hard Limit Switch, Tool Box W/Tools, Operation Manuals, #SM3VK2AX

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
3VK 2-Axis
Capacity: 10" x 54"
Stock: #SM3VK2AX
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table size: 10" x 54"
Longitudinal Travel: 31"
Cross Travel: 14-1/2"
Spindle Quill Travel: 5"
Knee Travel: 16"
Spindle Taper: R-8
Spindle Speeds: 70 to 5,000 RPM
Spindle To Table: 3.75" to 16.75"
Spindle Center To Column Front Surface: 6-7/8" to 23-1/2"
Quill Diameter: 4"
Controller: Centroid
CNC Axis: 2 Axis
Power Draw Bar: No
Speed Selector: Variable Speed
Load Capacity: 600 Lbs.
Coolant Tank Capacity: 7 Gallons
Horsepower: 3 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (W x D x H): 108" x 77" x 92"
Weight: 3,200 Lbs.
Register to Discount
Starting At $22,115
Finance As Low As
$452.69 Per Mo.*
more pictures

videos
Compare

10" x 54" Brand New Atrump CNC Bed Milling Machine With 3 Axis CNC Centroid Control, Mdl. A2-5T, Centroid M400I Control with 15" Color LCD, Shop Floor Programming/ Conversational, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Auto Lubrication System, Coolant System, Splash Guard, Chip Tray, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Halogen Light, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, Standard Way Covers on All Three Axes, Leveling Bolts & Plate, Tool Box W/Tools, Operation Manuals, Variable Speed Head Controlled By Centroid Control, 3 Axis CNC, #SMA25T

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
A2-5T
Capacity: 10" x 54"
Stock: #SMA25T
Category: Milling Machines
Subcategory: CNC, Vertical (Bridgeport Type)
Condition: New Machinery
Table size: 10" x 54"
Longitudinal Travel: 33.8"
Cross Travel: 19.6"
Knee Travel: 24"
Saddle Size: 20.07"
Spindle Quill Travel: 5"
Quill Diameter: 3.93"
Spindle Nose To Table Top: 3.93" to 27.5"
Spindle Taper: NST40/NMTB40
Spindle Speeds: 70 - 4,000 RPM
Load Capacity: 1,100 Lbs.
T-Slots (3): .62" x 3" x 2.55"
Transmission Of Spindle & Motor: Timing Belt
Head Swivel (Right/Left): 90 Degrees
.
Feed Rates
Rapid Feed Rate: X,Y, & Z (240 IPM AC)
Cutting Feed Rate: 1 to 120 IPM
.
Motor
Spindle Motor/Max Torque: 5 H.P.
Servo Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Lubrication Pump: 150W
Power Requirement: 10 KVA, 3 Phase 208V to 230V
.
Controller: Centroid
CNC Axis: 3 Axis
Power Draw Bar: No
Speed Selector: Variable Speed
.
Warranty: One Year Limited Warranty
Horsepower: 3 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 116" x 83" x 102"
Weight: 4,600 Lbs.
Register to Discount
Starting At $37,085
Finance As Low As
$759.13 Per Mo.*
more pictures
Compare

9" x 49" Brand New Atrump CNC Bed Milling Machine, Mdl. A1-5T, Centroid M400I Control with 15" Color LCD, Hardened & Ground with Turcite-B Coating Guide Way, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, X, Y, & Z Axis are Dovetail, Standard Way Covers on All Three Axes, Tool Box W/Tools, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, RS-232 Interface, 60 GB Solid State Hard Drive, USB 2.0 Port, Operation Manuals, #SMA15T

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
A1-5T
Capacity: 9" x 49"
Stock: #SMA15T
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 9" x 49"
Longitudinal Travel: 28.74"
Cross Travel: 15.74"
Vertical Travel: 19.68"
Saddle Size: 20.07"
Quill Travel: 5"
Quill Diameter: 3.94"
Spindle Nose To Table Top: 3.93" to 23.62"
Spindle Taper: R8/NT40
Spindle Speed: 70 to 4200 rpm with Hi/Lo Gear
Load Capacity: 880 lbs
T-Slot: 0.62" x 3" x 2.55"
Transmission Of Spindle & Motor: Timing Belt
Head Swivel (Right/Left): 90 Degrees
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 150ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 5 H.P.
Servo Motors on XYZ: 0.75 kW/0.75 kW/1 kW - AC
Coolant Pump: 1/8 H.P.
Lubrication Pump: Auto Lubrication
.
Warranty: One Year Limited Warranty
Horsepower: 12 H.P.
Voltage: 208V to 230V ~ 3 Phase
Floor Space (L x W x H): 99" x 102" x 98"
Shipping Dimension (L x W x H): 90" x 68" x 89"
Weight: 3770 lbs
Register to Discount
Starting At $32,950
Finance As Low As
$674.49 Per Mo.*
more pictures
Compare

13" x 50" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-430H, Centroid M400 Control with 15" Color LCD, 7.5 H.P. Spindle Motor, CAT40 Spindle Taper, Programmable Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, Splash Guard, 120 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Standard Way Covers on All Three Axes, Tool Box W/Tools, Operation Manuals, #SMBM430H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-430H
Capacity: 13" x 50"
Stock: #SMBM430H
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Overall Capacity: 13.7" x 50"
Longitudinal Travel: 31.5"
Cross Travel: 15.7"
Vertical Travel: 17.7"
Spindle Nose To Table Top: 4.7" to 22.4"
Load Capacity: 880 lbs
Spindle Taper: CAT40
Spindle Speed: 60 to 8000 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface: 17.7"
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor: 7.5 H.P.
Feed Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: 150W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 16 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 110.6" x 94.5" x 96.8"
Weight: 5500 lbs
Register to Discount
Starting At $44,860
Finance As Low As
$918.28 Per Mo.*
more pictures
Compare

12" x 6" Brand New Atrump Manual Tool Cutter Grinder, Mdl. CM-A , Equipped With An Digital Readout On The X, Y, & A Axis, and a High Precision Camera Device for precise Grinding, Sharpening, & Reconditioning Complex Tools & Cutters., Precise Ballscrew Using Grinding Wheel Side X & Y Axis, Precise Grinding Acme Lead Screw Using the Other Entire Axis, Swiveling, Turntable & Moveable Offset Slide, Wheelhead Toothrest Assembly with Extension Bar, Super Precision Match Sets Class 7 Bearing at Spindle, Grinding Wheel Guards With Extension Bar, Front Stock Support, Straight Cylindrical Collects: (A) Metric Sizes or (B) Inch Sizes, Set of 3 Taper Collects, Set of 5 Grinding Wheel Flanges, 4 Standard & 1 Extension Flange, Diamond Holder Bracket, Wrench for Workhead, Toothrest Entering Gauge, Adjustable Tailstock Support Unit, Spanner for Grinding Wheel, Leveling Blocks, Standard Arbor, Screwdriver, Set of Wrenches, Double End Spanner, Set of 4 Index Plates for Spiral Lead Mechanism, Tool Box, Oil Bottle, Grinding Wheels (1 Each of Straight, Flaring Cup & Dish Shape), Additional Diamond Truing Tool with Diamond Nib, Spring Loaded Index Pawl for Workhead, 1/2" Wheel Flange & Spanner, Grinding Attachment for Large Face Milling Cutter, 4" Six-Jaw Chuck for Workhead, Wheel Flange with 2 Collets for Internal Grinding, Wet Grinding Attachment with Water Proof Equipment, Casting Base to Reduce Vibration, Quality Certified by ISO 9002 & CE Standard, #SMCMA

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
CM-A
Capacity: 12" x 6"
Stock: #SMCMA
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Capacity: 12" x 6"
.
Work Head
Swing Over Main Slide (Diameter) : 12"
Collet Work Diameter: 1.25" (max)
Collet Work Diameter: 0.19" (min)
Spiral Angle: 60 Degrees (max)
Distance Between Speak of Spindle: 3.93" (max)
Distance Between Center of Tailstock: 5.98" (max)
Grinding Wheel Head
Grinding Diameter: 3.93" (max)
.
Range
Work Head
Slide Travel : 5.11"
Offset Slide Travel: 3.93"
Front Of Center: 1.96"
Rear Of Center: 1.96"
.
Angle Adjustment of Workhead
Rotation of Horizontal Plane: +/- 105° (210°)
Rotational of Vertical Plane: +/- 40°
.
Grinding Wheel Head
Slide Travel : 4.33"
Vertical Slide Travel: 9.44" (total)
Above Center: 4.33"
Below Center: 5.11"
Cross Slide Travel: 6.7"
Front Of Center: 2.75"
Rear of Center: 3.93"
.
Spindle Speed
Workhead Speed: 360 rpm
Wheelhead (3 Speeds): 4000/6000/8000 rpm
.
Motor
Workhead, AC: 1/4 H.P.
Grinding Wheelhead, AC: 1/2 H.P.
.
Warranty: One Year Limited Warranty
Power Requirements : 6.5 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H): 82" x 45" x 80"
Weight: 2270 lbs
Register to Discount
Starting At $56,595
Finance As Low As
$1,158.50 Per Mo.*
more pictures
Compare

12" x 6" Brand New Atrump Manual Tool Cutter Grinder, Mdl. CM-2 , Swiveling, Turntable & Moveable Offset Slide, Precise Ballscrew Using Grinding Wheel Side X & Y Axis, Precise Grinding Acme Lead Screw Using the Other Entire Axis, Super Precision Match Sets Class 7 Bearing at Spindle, Wheelhead Toothrest Assembly with Extension Bar, Grinding Wheel Guards With Extension Bar, Front Stock Support, Diamond Holder Bracket, Wrench for Workhead, Toothrest Entering Gauge, Adjustable Tailstock Support Unit, Spanner for Grinding Wheel, Leveling Blocks, Standard Arbor, Screwdriver, Set of Wrenches, Double End Spanner, Set of 4 Index Plates for Spiral Lead Mechanism, Tool Box, Oil Bottle, Grinding Wheels (1 Each of Straight, Flaring Cup & Dish Shape), Additional Diamond Truing Tool with Diamond Nib, 1/2" Wheel Flange & Spanner, Casting Base to Reduce Vibration, Quality Certified by ISO 9002 & CE Standard, #SMCM2

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
CM-2
Capacity: 12" x 6"
Stock: #SMCM2
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Capacity: 12" x 6"
.
Workhead Capacity:
Swing Over Main Slide (Diameter) : 12" (max)
Collet Work Diameter: 1.25" (max)
Collet Work Diameter: 0.19" (min)
Spiral Angle: 60 Degrees (max)
Distance Between Speak of Spindle: 3.93" (max)
Distance Between Center of Tailstock: 5.98" (max)
Grinding Wheel Head
Grinding Diameter: 3.93" (max)
.
Range
Work Head
Slide Travel : 5.11"
Offset Slide Travel: 3.93"
Front Of Center: 1.96"
Rear of Center: 1.96"
.
Angle Adjustment of Workhead
Rotation of Horizontal Plane: +/- 105° (210°)
Rotational of Vertical Plane: +/- 40°
.
Grinding Wheelhead
Slide Travel : 4.33"
Vertical Slide Travel: 9.44" (total)
Above Center: 4.33"
Below Center: 5.11"
Cross Slide Travel: 6.7"
Front of Center: 2.75"
Rear of Center: 3.93"
.
Spindle Speed
Workhead Speed: 360 rpm
Wheelhead (3 Speeds): 4000/6000/8000 rpm
.
Warranty: One Year Limited Warranty
Motor
Workhead, AC: 1/4 H.P.
Grinding Wheelhead, AC
.
Power Requirements : 6.5 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H): 65" x 45" x 60"
Weight: 1895 lbs
Register to Discount
Starting At $26,695
Finance As Low As
$546.45 Per Mo.*
more pictures
Compare

9" x 27" Brand New Atrump Manual Tool Cutter Grinder, Mdl. M40, Tilting Wheelhead for Easy Clearance Setting, Work Head, Accurate, Versatile Table, Anti-Friction Slide Way Bearings, Centralized Lubrication which Lubricates all Required Points, Left Hand & Right Hand Tailstock, Diamond Dresser Holder, Wheel Guards, Wheel Guard Holders (long & short), Universal Tooth Rest Plate & Blade Holder Extension, Center Gauge, Collet Wrench, Plain Tooth Rest Holder with Offset Blade, Ejector Rod, T-wrench for Grinding Wheel Sleeve, Sleeve Extracting Bar, Pin Wrench, Micrometer Adjustable Toothrest with Round Top Blade, Leveling Pads (3), Touch Up Paint, Plain Tooth Rest Holder with Offset Blade, Reducing Collet, 5 Sets of Grinding Wheel Sleeves, Grinding Wheels, Double End Wrench, Nut Wrench & Allen Wrench, Spacer for 1/8" Diameter Grinding Wheel, Center for Workhead Spindle, 4" Spindle Extension, 4" Extension Wheel Sleeve & Collar, Belt for Spindle Drive (Poly-Flex Belt), Draw-in Bolt for Workhead & Washer, Tool Cabinet, Extension & Spacers of Slit-Saw & Side-Mill Cutters, Hardened & Ground Ways, Quality Certified by ISO 9002 & CE Standard, #SMM40

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
M40
Capacity: 9" x 27"
Stock: #SMM40
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Capacity: 9" x 27"
.
Capacity
Longitudinal Movement of Table: 15.7"
Distance Between Center: 27.5"
Cross Movement of Saddle: 9.8"
Work Head Taper: MT #5
  NT50 or BT50
.
Table
T-slot: 0.59" (+0.0019" ~ +0.0039")
Table Working Range: 5.47" x 37"
Wheel Speeds: 2600/3700/6200 RPM
Wheel Motor: 1.5 H.P.
.
Range of Movement
Rotative Angle of Table: +/- 60 Degrees
Jog Adjustment of Table: +/- 10 Degrees
Vertical Movement of Wheelhead: 9.8"
Slope of Wheelhead: +/- 15 Degrees
Rotative Angle of Wheelhead: 360 Degrees
Distance Between Spindle Center & Table: Max 11.8", Min 1.96"
Distance Between Spindle Center & T-slot: Max 16.3", Min 6.5"
.
Power Requirements : 6.5 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H): 61" x 68" x 58"
Weight: 2560 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $21,780
Finance As Low As
$445.84 Per Mo.*
more pictures
Compare

11" x 5" Brand New Atrump CNC Tool & Cutter Grinder, Mdl. TD-2, PLC 2-Axis Controller, 19" TFT Monitor, CCD Camera System with Magnification 5X - 50X (manual), Grinding Wheel Workhead & Swing Workhead, Wheel Grinding Dress & Check, CNC Hand Wheel, 2 Sets of Work Lamps, Dress Grinding Wheel Flange, Tool Box, Dry & Wet Coolant Tank, CCD Test Bar, Spare Belt for Spindle Drive, Additional Diamond Truing Tool, Semi Splash Guard, Wheel Dresser, Leveling Bolts & Block, Coolant Hoses & Valves, Linear Scale Device (U, W), #SMTD2

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
TD-2
Capacity: 11" x 5"
Stock: #SMTD2
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Capacity: 11" x 5"
.
CBN Grinding Wheel
Spindle Taper: BT40
CBN Max. Diameter
CBN Max. Diameter
CBN Spindle Speed: 100 - 2500 rpm
CBN Spindle Motor: 2 H.P.
CBN Longitudinal Movement (W): 11"
CBN Cross Movement (U): 5.5"
.
Grinding Wheel
Grinding Wheel Diameter
Grinding Wheel Speed: 200 - 3500 rpm
Grinding Wheel Motor: 1 H.P.
Grinding Wheel X Axis Travel: 3.93" Servo
Grinding Wheel Z Axis Travel: 0.8" - 3.1" Servo
Grinding Wheel Z Axis Swing Time: 0 - 1965 inch/min
Grinding Wheel B Axis Auto Rotation: None
Grinding Wheel B Axis Rotation Angle: +/- 95 Degrees
.
Coolant Capacity: 60 Gallons
Air Requirement: 90 - 100 psi
Power Requirements : 15 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H): 60" x 78" x 71"
Weight: 3860 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $90,900
Finance As Low As
$1,860.72 Per Mo.*
more pictures
Compare

11" x 5" Brand New Atrump CNC Diamond Wheel Truing & Dressing Tool & Cutter Grinder, Mdl. TD-3, 19" TFT Monitor, CCD Camera System with Magnification 5X - 50X (manual), CNC Hand Wheel, Linear Scale Device (U, W), Dry & Wet Coolant Tank, Coolant Hoses & Valves, Leveling Bolts & Block, 2 Sets of Work Lamps, Dress Grinding Wheel Flange, CCD Test Bar, Spare Belt for Spindle Drive, Additional Diamond Truing Tool, Semi Splash Guard, Wheel Dresser, Tool Box/Adjusting Tool, #SMTD3

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
TD-3
Capacity: 11" x 5"
Stock: #SMTD3
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Capacity: 11" x 5"
.
CBN Grinding Wheel
Spindle Taper: BT40
CBN Max. Diameter: 9"
CBN Min. Diameter: 5"
CBN Spindle Speed: 100 - 2500 rpm
CBN Spindle Motor: 2 H.P.
CBN Longitudinal Movement (W): 11"
CBN Cross Movement (U): 5.5"
.
Grinding Wheel
Grinding Wheel Diameter: 8" x 0.75"t
Grinding Wheel Speed: 200 - 3500 rpm
Grinding Wheel Motor: 1 H.P.
Grinding Wheel X Axis Travel: 3.93" Servo
Grinding Wheel Z Axis Travel: 0.8" - 3.1" Servo
Grinding Wheel Z Axis Swing Time: 0 - 1965 inch/min
Grinding Wheel B Axis Auto Rotation: Servo
Grinding Wheel B Axis Rotation Angle: +/- 95 Degrees
.
Coolant Capacity: 60 Gallons
Air Requirement: 90 - 100 psi
Power Requirements : 15 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H): 60" x 78" x 71"
Weight: 3860 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $118,900
Finance As Low As
$2,433.88 Per Mo.*
more pictures
Compare

9" x 8" x 9" Brand New Atrump CNC 5 Axis Grinder, Mdl. TE-5, IPC with Siemens 840D 5-Axis Controller, ISO 9001 Quality Assurance, 3-Dimensional Model Simulation System, Heavy Duty Linear Slide Way, C3 Precision Ball Screws Hardened & Ground for Higher Accuracy and Long Lasting, FC30 Meehanite Casting Main Frame, Standard Way Cover on 3 Axes, GUTS Grinding Software, Oil & Mist Separators, Coolant System, Oil Coolant System, Central Lubrication System, Auto Lubrication System, Cooler Unit for Oil Coolant System, Portable Hand Wheel, Built In Quartz Work Light, Full Enclosure & Splash Guard, BT50 Test Bar, Plug Gauge BT50 for Grinding Wheel Dressing, Plug Gauge BT50 for Presetter Measurement, Halogen Lamp, Leveling Bolts & Blocks, Pressure Dust Container with Filter, Plug Gauge for Measurement Machine Reference Points, Pneumatic Collet Holder, Tool Box/Adjusting Tool, #SMTE5

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
TE-5
Capacity: 9" x 8" x 9"
Stock: #SMTE5
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Capacity: 9" x 8" x 9"
.
Tool Data
Maximum Working Length: 3.9"
Maximum Workpiece Diameter: 7.8"
.
Spindle Motor
Grinding Spindle Speed: 100 - 9000 rpm
Grinding Spindle Motor: 5 H.P.
Maximum Grinding Wheel Diameter: 5.9"
.
Work Head
Spindle Taper: BT50
Clamping System: 6 kg (80psi)
Min. Work Head Graduation: 0.001 Degree
.
Mechanical Axes Travel
X Axis: 9.4"
Y Axis: 8.6"
Z Axis: 9.8"
A Axis: -20 Degrees - +200 Degrees
C Axis: â
Rapid Traverse of X/Y Axis: 393 inch/min
Rapid Traverse of Z Axis: 314 inch/min
Rapid Traverse of A Axis: 15 rpm
Rapid Traverse of C Axis: 100 rpm
Linear Resolution: 3.9" x 10^-5
Radial Resolution: 0.001 Degree
.
Axis Motor & Coolant System
X/Y/Z Axis Servo Motor: 2 H.P.
C/A Axis Servo Motor: 1 H.P.
Coolant Motor: 2 H.P.
Lubrication Pump: 25 W
Coolant Capacity: 60 Gallons
.
Controller
Model: IPC with Siemens
Number of Control Axes: 5 Axis (X,Y,Z,C,A)
.
Air Requirement: 90 - 100 psi
Power Requirements : 15 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H): 88" x 74" x 98"
Weight: 8820 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $290,420
Finance As Low As
$5,944.90 Per Mo.*
more pictures
Compare

14" x 9" x 6" Brand New Atrump 5-Axis CNC Tool Grinder, Mdl. TG-5 Plus, IPC with Siemens 840D 5-Axis Controller, Heavy Duty Linear Slide Way, C3 Precision Ball Screws Hardened & Ground for Higher Accuracy and Long Lasting, FC30 Meehanite Casting Main Frame, Standard Way Cover on 3 Axes, Tool Box & Tools, Coolant System, Central Lubrication System, Built In Quartz Work Light, Portable Hand Wheel, Full Enclosure & Splash Guard, 5 Sets of Grinding Wheel Flanges, Cooler Unit for Oil Coolant System, 3-Dimensional Model Simulation System, Pneumatic Collet Holder, Halogen Lamp, Spare Belt, Oil & Mist Separators, Angular Setting Disc for Machine Reference Point Measurement, Pressure Dust Container, Leveling Bolts & Block, GUTS Grinding Software, Oil Coolant System, Plug Gauge BT/NT50 for Presetter Measurement, Automatic Lubrication System, ISO 9001 Quality Assurance, #SMTG5Plus

>> View Complete Specs

Atrump Grinders

Manufacturer: Atrump
Model:
TG-5 Plus
Capacity: 14" x 9" x 6"
Stock: #SMTG5Plus
Category: Grinders
Subcategory: Tool & Cutter
Condition: New Machinery
Capacity: 14" x 9" x 6"
.
Tool Data
Maximum Working Length: 7.8"
Maximum Workpiece Diameter: 7.8"
.
Grinding Spindle Drive
Spindle Speed: 100 - 9000 rpm
Peak Power: 10 H.P.
Maximum Grinding Wheel Diameter: 5.9"
.
Work Head
Spindle Taper: BT50 or BT40
Clamping System: 6 kg (80psi)
Min. Work Head Graduation: 0.001 Degree
.
Mechanical Axes Travel
X Axis: 14.5"
Y Axis: 9"
Z Axis: 6.7"
A Axis: -20 Degrees - +200 Degrees
C Axis: â
Rapid Traverse of X/Y/Z Axis: 236 inch/min
Rapid Traverse of A Axis: 15 rpm
Rapid Traverse of C Axis: 100 rpm
Linear Resolution: 3.9" x 10^-5
Radial Resolution: 0.001 Degree
.
Axis Motor & Coolant System
X/Y/Z Axis Servo Motor: 2 H.P.
C/A Axis Servo Motor: 1 H.P.
Coolant Motor: 3 H.P. & 2 H.P.
Lubrication Pump: 25 W
Coolant Capacity: 60 Gallons
.
Controller
Model: IPC with Siemens
Number of Control Axes: 5 Axis (X,Y,Z,C,A)
.
Air Requirement: 90 - 100 psi
Power Requirements : 15 KVA 3 Phase 208V to 230V (Max)
Dimensions (L x W x H): 125" x 90" x 88"
Weight: 9990 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $306,950
Finance As Low As
$6,283.27 Per Mo.*
more pictures
Compare

12" x 60" Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. AONE4EV, Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Hardened & Ground with Turcite-B coating Guide Way, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Power Knee, Draw Bar, Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Halogen Work Light, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Tools & Box, Operation Manual, #SMAONE4EV

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
AONE4EV
Capacity: 12" x 60"
Stock: #SMAONE4EV
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Capacity: 12" x 60"
.
Table: 12" x 60"
Logitudinal Travel: 40"
Cross Travel: 17"
Knee Travel: 16-5/8"
Quill Travel: 5"
Quill Diameter: 3.94"
Spindle Nose to Table Top: 2-1/4" to 21-7/8"
Load Capacity: 900 lbs
Spindle Taper: NST40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8" to 23-1/4"
Ram Travel: 20"
.
Head
Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees
.
Motor
Spindle Motor: 5 H.P. (max torque)
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic
.
Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 114" x 71" x 90"
Weight: 4300 lbs
Register to Discount
Starting At $16,925
Finance As Low As
$346.45 Per Mo.*
more pictures
Compare

12" x 60" Brand New Atrump Vertical 3 Axis Manual Knee Mill, Mdl. AONE4VK, 5 H.P. Spindle Motor, NST40/NMTB40 Spindle Taper, 3900 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Draw Bar, Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Halogen Work Light, Power Knee, Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Tools & Box, Operation Manual, #SMAONE4VK

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
AONE4VK
Capacity: 12" x 60"
Stock: #SMAONE4VK
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Capacity: 12" x 60"
.
Table: 12" x 60"
Logitudinal Travel: 40"
Cross Travel: 17"
Quill Travel: 5"
Knee Travel: 16-5/8"
Quill Diameter: 3.94"
Spindle Nose to Table Top: 2-1/4" to 21-7/8"
Load Capacity: 900 lbs
Spindle Taper: NST40
Spindle Speed: 70 to 3900 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8" to 23-1/4"
Ram Travel: 20"
.
Head
Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees
.
Motor
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic
Power Requirements : 6.5 KVA, 3 Phase, 208V to 230V (Max)
.
Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Dimensions (L x W x H): 114" x 71" x 90"
Weight: 4300 lbs
Register to Discount
Starting At $15,125
Finance As Low As
$309.61 Per Mo.*
more pictures
Compare

12" x 60" Brand New Atrump Vertical Variable Speed Manual Knee Mill, Mdl. AONE5EV, Electronical Variable Speed 5 H.P. Spindle Motor & 5 H.P. Inverter, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Heavy Duty Square Slideway on Y & Z Axis, Power Knee, Draw Bar, Built-In Coolant System, Auto Lubrication System, Chip Tray, Leveling Bolts & Plate, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Halogen Work Light, Tools & Box, Operation Manual, #SMAONE5EV

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
AONE5EV
Capacity: 12" x 60"
Stock: #SMAONE5EV
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Capacity: 12" x 60"
.
Table: 12" x 60"
Logitudinal Travel: 40"
Cross Travel: 17"
Knee Travel: 16-5/8"
Quill Travel: 5.5"
Quill Diameter: 4.13"
Spindle Nose to Table Top: 2-1/4" to 21-7/8"
Load Capacity: 990 lbs
Spindle Taper: NST40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8" to 23-1/4"
Ram Travel: 20"
.
Motor
Spindle Motor: 5 H.P.
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic
.
Warranty: One Year Limited Warranty
Horsepower: 8 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 114" x 71" x 90"
Weight: 4300 lbs
Register to Discount
Starting At $18,260
Finance As Low As
$373.78 Per Mo.*
more pictures
Compare

14" x 54" Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. AONE7EV, Electronic Variable Speed 7.5 H.P. Spindle Motor, NST40/NMTB40 Spindle Taper, Digital Output 4000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Heavy Duty Square Slideway on Y & Z Axis, Anti-Rust Chrome Quill, Draw Bar, Auto Lubrication System, Built-In Coolant System, Power Knee, Built-In Quartz Work Light, Gear Type Power Feed X Axis, Gear Type Power Feed Y Axis, Chip Tray, Leveling Bolts & Plate, Way Cover, Tools & Box, Operation Manual, #SMAONE7EV

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
AONE7EV
Capacity: 14" x 54"
Stock: #SMAONE7EV
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Capacity: 14" x 54"
.
Table: 14" x 54"
Logitudinal Travel: 33.5"
Cross Travel: 19.7"
Knee Travel: 23.6"
Quill Diameter: 4.13"
Quill Travel: 6"
Spindle Nose to Table Top: 11-1/4" to 27"
Load Capacity: N/A
Spindle Taper: NST40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Ram Travel: 24"
.
Motor
Spindle Motor: 7.5 H.P.
KVA Rating : 18 Amps
Coolant Pump: 1/8 H.P.
Lubrication Pump: Automatic
.
Warranty: One Year Limited Warranty
Horsepower: 8 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 78.7" x 68.9" x 104.3"
Weight: 6600 lbs
Register to Discount
Starting At $25,200
Finance As Low As
$515.84 Per Mo.*
more pictures
Compare

9" x 49" Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. 2EV, Electronic Variable Speed 3 H.P. Spindle Motor, R8 Spindle Taper, 5 H.P. Inverter, Digital Output 5000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", One Shot Lubrication System, Built-In Quartz Work Light, Draw Bar, Tools & Box, Operation Manual, #SM2EV

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
2EV
Capacity: 9" x 49"
Stock: #SM2EV
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Capacity: 9" x 49"
.
Table: 9" x 49"
Longitudinal Travel: 36"
Cross Travel: 12"
Quill Travel: 5"
Knee Travel (Manual): 16"
Quill Diameter: 3-3/8"
Spindle Nose to Table Top: 3/4" to 16-3/4"
Load Capacity: 600 lbs
Spindle Taper: R8
Spindle Speed: 70 to 5000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-7/8" to 27-7/8"
Ram Travel: 12"
.
Head
Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees
.
Motor
Spindle Motor: 3 H.P.
KVA Rating : 4 KVA, 15 Amps
Lubrication Pump: One Shot
.
Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 101" x 70" x 82"
Weight: 2600 lbs
Register to Discount
Starting At $9,065
Finance As Low As
$185.56 Per Mo.*
more pictures
Compare

10" x 54" Brand New Atrump Vertical Electronic Variable Speed Manual Knee Mill, Mdl. 3EV, Electronic Variable Speed 3 H.P. Spindle Motor, R8 Spindle Taper, 5 H.P. Inverter, Digital Output 5000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B coating Guide Way, C7 Double Nut Precision ACME Lead Screws For High Accuracy And Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Standard Way Covers on all 3 Axis, Tool Box W/Tools, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", One Shot Lubrication System, Built-In Quartz Work Light, Draw Bar, Leveling Bolts & Plate, Operation Manual, #SM3EV

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
3EV
Capacity: 10" x 54"
Stock: #SM3EV
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Capacity: 10" x 54"
.
Table: 10" x 54"
Logitudinal Travel: 36.37"
Cross Travel: 15.75"
Quill Travel (Z Axis): 5"
Knee Travel (Manual): 16"
Quill Diameter: 3-3/8"
Spindle Nose to Table Top: 3/4" to 16-3/4"
Load Capacity: 704 lbs
Spindle Taper: R8
Spindle Speed: 70 to 5000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-7/8" to 27-7/8"
Ram Travel: 19"
.
Head
Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees
.
Motor
Spindle Motor: 3 H.P.
KVA Rating : 4 KVA, 15 Amps
Lubrication Pump: One Shot
.
Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 102" x 77" x 84"
Weight: 2900 lbs
Register to Discount
Starting At $10,540
Finance As Low As
$215.75 Per Mo.*
more pictures
Compare

10" x 54" Brand New Atrump CNC Bed Milling Machine , Mdl. A2-5H, Centroid M400I Control with 15" Color LCD, Hardened & Ground with Turcite-B coating Guide Way, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Box Ways Design on Y & Z Axis, Standard Way Covers on all 3 Axis, Tool Box W/Tools, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, 60 GB Solid State Hard Drive, RS-232 Interface, Auto Lubrication System, USB 2.0 Port, Operation Manual, #SMA25H

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
A2-5H
Capacity: 10" x 54"
Stock: #SMA25H
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Table: 10" x 54"
Logitudinal Travel: 33.8"
Cross Travel: 19.6"
Vertical Travel: 25.1"
Saddle Size: 20.07"
Spindle Nose to Table Top: 3.93" to 29.13"
Spindle Taper: CAT40
Spindle Speed: 8000 rpm
Load Capacity: 1100 lbs
T-Slot: 0.62" x 3" x 2.55"
Transmission of Spindle & Motor: Belt
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 240 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max-Torque: 5 H.P.
Servo Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Lubrication Pump: 150 W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 13 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 115.6" x 82.7" x 101.6
Weight: 4550 lbs
Register to Discount
Starting At $38,450
Finance As Low As
$787.07 Per Mo.*
more pictures
Compare

10" x 54" Brand New Atrump CNC with 3 Axis Bed Mill, Mdl. A2-7H, Centroid M400i Control with 15" Color LCD, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Tool Box W/Tools, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, Splash Guard, 60 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Operation Manuals, #SMA27H

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
Capacity: 10" x 54"
Stock: #SMA27H
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Table: 10" x 54"
Longitudinal Travel: 33.8"
Cross Travel: 19.6"
Vertical Travel: 25.1"
Saddle Size: 20.07"
Spindle Nose to Table Top: 3.93" to 29.13"
Spindle Taper: CAT40
Spindle Speed: 8000 rpm
Load Capacity: 1100 lbs
T-Slot: 0.62" x 3" x 2.55"
Transmission Of Spindle & Motor: Belt
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 240 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 7.5 H.P.
Servo Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Lubrication Pump: 150W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 18 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 115.6" x 82.7" x 101.6"
Weight: 4600 lbs
Register to Discount
Starting At $39,500
Finance As Low As
$808.57 Per Mo.*
more pictures
Compare

13" x 60" Brand New Atrump CNC with 3 Axis Bed Mill, Mdl. A3-7H, Centroid M400i Control with 15" Color LCD, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Dovetail Way on X, Standard Roller Way Cover on Rear Y & Z, Telescopic Metal Way Cover on Front Y, Tool Box W/Tools, Coolant System, Auto Lubrication System, Built-In Quartz Work Light, Table Guard, Leveling Bolts & Plate, Half Enclosed Splash Guard, 60 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Standard Way Cover on X & Z, Metal Way Cover on Front Y, Operation Manuals, #SMA37H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
A3-7H
Capacity: 13" x 60"
Stock: #SMA37H
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 13" x 60"
Longitudinal Travel: 39.9"
Cross Travel: 19.9"
Vertical Travel: 19.6"
Saddle Size: 47.2"
Spindle Nose to Table Top: 3.9" to 24.4"
Spindle Taper: CAT40/BT40
Spindle Speed: 8000 rpm
Load Capacity: 1100 lbs
T-Slot: 0.62" x 3" x 2.55"
Transmission Of Spindle & Motor: Belt
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 120 ipm
.
Motor
Spindle Motor/Max Torque: 7.5 H.P.
Servo Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Lubrication Pump: 150W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 18 H.P.
Voltage: 208V to 230V ~ 3 Phase
Floor Space (L x W x H): 135.8" x 111.8"
Dimensions (L x W x H): 91.4" x 69.6" x 91.7"
Weight: 4600 lbs
Register to Discount
Starting At $45,300
Finance As Low As
$927.29 Per Mo.*
more pictures
Compare

13" x 60" Brand New Atrump CNC Bed Mill, Mdl. A3-10H, Centroid M400i Control with 15" Color LCD, 8000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Dovetail Way on X, Standard Roller Way Cover on Rear Y & Z, Telescopic Metal Way Cover on Front Y, Coolant System, Auto Lubrication System, Built-In Quartz Work Light, Table Guard, Leveling Bolts & Plate, Half Enclosed Splash Guard, 60 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SMA310H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
A3-10H
Capacity: 13" x 60"
Stock: #SMA310H
Category: Milling Machines
Subcategory: Bed Mills, CNC
Condition: New Machinery
Table: 13" x 60"
Longitudinal Travel: 39.9"
Cross Travel: 19.9"
Vertical Travel: 19.6"
Saddle Size: 47.2"
Spindle Nose to Table Top: 3.9" to 24.4"
Spindle Taper: CAT40/BT40
Spindle Speed: 8000 rpm
Load Capacity: 1100 lbs
T-Slot: 0.62" x 3" x 2.55"
Transmission Of Spindle & Motor: Belt
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 120 ipm
.
Motor
Spindle Motor/Max Torque: 10 H.P.
Servo Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: 150W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 16 H.P.
Voltage: 208V to 230V ~ 3 Phase
Floor Space: 135.8" x 111.8"
Dimensions (L x W x H): 91.4" x 69.6" x 91.7"
Weight: 4600 lbs
Register to Discount
Starting At $45,300
Finance As Low As
$927.29 Per Mo.*
more pictures
Compare

15" x 54" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-460H, Centroid M400 Control with 15" Color LCD, 10 H.P. Spindle Motor, CAT40 Spindle Taper, 8000 rpm Spindle Taper, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Auto Lubrication System, Leveling Bolts & Plate, 120 GB Solid State Hard Drive, RS-232 Interface, USB 2.0 Port, Splash Guard, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SMBM460H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-460H
Capacity: 15" x 54"
Stock: #SMBM460H
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 15.7" x 54"
Longitudinal Travel: 40"
Cross Travel: 20"
Vertical Travel: 22"
Spindle Nose to Table Top: 4" to 26"
Load Capacity: 1550 lbs
Spindle Taper: CAT40
Spindle Speed: 60 to 8000 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface: 21.7"
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor: 10 H.P.
Feed Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: 150W
.
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 16 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 115" x 78" x 96"
Weight: 6820 lbs
Register to Discount
Starting At $52,860
Finance As Low As
$1,082.04 Per Mo.*
more pictures
Compare

15" x 54" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-460T, Centroid M400 Control with 15" Color LCD, 7.5 H.P. Spindle Motor, NT40 Spindle Taper, 4200 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, Splash Guard, Shop Floor Programming/ Conversational, USB 2.0 Port, 120 GB Solid State Hard Drive, RS-232 Interface, Tool Box W/Tools, Operation Manuals, #SMBM460T

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-460T
Capacity: 15" x 54"
Stock: #SMBM460T
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 15.7" x 54"
Longitudinal Travel: 40"
Cross Travel: 20"
Vertical Travel: 22"
Spindle Nose to Table Top: 4" to 26"
Load Capacity: 1550 lbs
Spindle Taper: NT40
Spindle Speed: 60 - 4200 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface: 21.7"
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 7.5 H.P.
Feed Motors on XYZ: 1 kW - AC
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: 150W
.
Warranty: One Year Limited Warranty
Horsepower: 16 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 115" x 78" x 96"
Weight: 6820 lbs
Register to Discount
Starting At $52,860
Finance As Low As
$1,082.04 Per Mo.*
more pictures
Compare

16" x 63" Brand New Atrump CNC Bed Milling Machine , Mdl. BM-560H, Centroid M400 Control with 15" Color LCD, 10 H.P. Spindle Motor, CAT40 Spindle Taper, 8000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, USB 2.0 Port, 120 GB Solid State Hard Drive, RS-232 Interface, Splash Guard, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SMBM560H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-560H
Capacity: 16" x 63"
Stock: #SMBM560H
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 16.5" x 63"
Longitudinal Travel: 51"
Cross Travel: 24.5"
Vertical Travel: 24"
Spindle Nose To Table Top: 5" to 30"
Load Capacity: 2000 lbs
Spindle Taper: NMTB40 or CAT40
Spindle Speed: 60 to 8000 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor: 10 H.P.
Feed Motors on XYZ: 2 kW - AC Servo
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: 150W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 16 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 165" x 84" x 105"
Weight: 8360 lbs
Register to Discount
Starting At $62,300
Finance As Low As
$1,275.28 Per Mo.*
more pictures
Compare

16" x 63" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-560T, Centroid M400 Control with 15" Color LCD, 10 H.P. Spindle Motor, NT40 Spindle Taper, 4000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Leveling Bolts & Plate, Splash Guard, Shop Floor Programming/ Conversational, USB 2.0 Port, 120 GB Solid State Hard Drive, RS-232 Interface, Tool Box W/Tools, Operation Manuals, #SMBM560T

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-560T
Capacity: 16" x 63"
Stock: #SMBM560T
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 16.5" x 63"
Longitudinal Travel: 51"
Cross Travel: 24.5"
Vertical Travel: 24"
Spindle Nose to Table Top: 5" to 30"
Load Capacity: 2000 lbs
Spindle Taper: NT40
Spindle Speed: 60 to 4000 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface: 25.5"
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 10 H.P.
Feed Motors on XYZ: 2 kW - AC Servo
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: 150W
.
Warranty: One Year Limited Warranty
Horsepower: 16 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 165" x 84" x 105"
Weight: 8360 lbs
Register to Discount
Starting At $62,300
Finance As Low As
$1,275.28 Per Mo.*
more pictures
Compare

17" x 70" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-600H, Centroid M400 Control with 15" Color LCD, 15 H.P. Spindle Motor, CAT40 Spindle Taper, 8000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Auto Lubrication System, Leveling Bolts & Plate, USB 2.0 Port, RS-232 Interface, 120 GB Solid State Hard Drive, Splash Guard, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SMBM600H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-600H
Capacity: 17" x 70"
Stock: #SMBM600H
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 17.7" x 70.8"
Longitudinal Travel: 59"
Cross Travel: 24.4"
Vertical Travel: 23.6"
Spindle Nose to Table Top: 4.7" x 28.3"
Load Capacity: 2200 lbs
Spindle Taper: BT40 or CAT40
Spindle Speed: 60 to 8000 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface: 25.5"
T-Slot: 0.62" x 3" x 2.36"
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 15 H.P.
Feed Motors on XYZ: 2 kW - AC Servo
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 16 Gallons
Lubrication Pump: 150W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 21 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 175" x 102.7" x 110.5"
Weight: 9460 lbs
Register to Discount
Starting At $66,320
Finance As Low As
$1,357.57 Per Mo.*
more pictures
Compare

24" x 73" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-630H, Centroid M400 Control with 15" Color LCD, 15 H.P. Spindle Motor, CAT40 Spindle Taper, 8000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Auto Lubrication System, USB 2.0 Port, Leveling Bolts & Plate, RS-232 Interface, Splash Guard, 120 GB Solid State Hard Drive, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SMBM630H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-630H
Capacity: 24" x 73"
Stock: #SMBM630H
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 24" x 73"
Longitudinal Travel: 59"
Cross Travel: 33.5"
Vertical Travel: 28"
Spindle Nose To Table Top: 4.7" x 28.3"
Load Capacity: 3300 lbs
Spindle Taper: BT40 or CAT40
Spindle Speed: 60 to 8000 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface: 25.5"
T-Slot: 0.7" x 5" x 2.7"
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 15 H.P.
Feed Motors on XYZ: 2 kW - AC Servo
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 16 Gallons
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 21 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 175" x 105" x 115"
Weight: 11,000 lbs
Register to Discount
Starting At $79,720
Finance As Low As
$1,631.87 Per Mo.*
more pictures
Compare

13"/19" x 40" Brand New Atrump Precision Engine Lathe, Mdl. LD-1340, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Gap Bed, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8", 3 Jaw Scroll Chuck 6", 4 Way Tool Post, Floor Stand, Follow Rest, Face Plate 10", Complete Electric Control Unit, Tool Box & Kits, #SMLD1340

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
LD-1340
Capacity: 13"/19" x 40"
Stock: #SMLD1340
Category: Lathes
Subcategory: Precision, Engine
Condition: New Machinery
Basic Dimension
Swing Over Bed: 13"
Swing Over Gap: 19-1/4"
Swing Over Saddle: 7-5/8"
Distance Between Centers: 40"
.
Bed
Width of Bed Ways: 7-9/16"
Top Slide Travel: 4"
Cross Slide Travel: 6-1/2"
.
Spindle
Spindle Nose Mounting: STD: D1-4
Spindle Bore: 1-1/2"
Spindle Nose Taper & Sleeve: Outer M.T. #5, Inner M.T. #3
Range of Spindle Speeds: 9 Speed Gear Change
  80 to 2000 rpm
.
Thread & Feed
Range of Inch Threads: 4 to 56 T.P.I. (32 kinds)
Range of Metric Threads: 0.4 to 7.0 (30 kinds)
Range of Longitudinal Feeds: 0.0026" to 0.0638"/rev
Range of Crossfeeds: 0.0013" to 0.03919"/rev
.
Tailstock
Quill Taper: M.T. #3
Quill Travel: 4"
.
Motor
Main Spindle Motor: 3 H.P
Coolant Pump Motor: 1/8 H.P.
.
Warranty: One Year Limited Warranty
Horsepower: 8.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 73" x 30" x 58"
Weight: 1322 lbs
Register to Discount
Starting At $9,275
Finance As Low As
$189.86 Per Mo.*
more pictures
Compare

29" x 72" Brand New Atrump CNC Bed Milling Machine, Mdl. BM-660H, Centroid M400 Control with 15" Color LCD, 15 H.P. Spindle Motor, CAT40 Spindle Taper, 8000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy and Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Auto Lubrication System, Leveling Bolts & Plate, Splash Guard, Shop Floor Programming/ Conversational, USB 2.0 Port, RS-232 Interface, 120 GB Solid State Hard Drive, Tool Box W/Tools, Operation Manuals, #SMBM660H

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
BM-660H
Capacity: 29" x 72"
Stock: #SMBM660H
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 29.9" x 72"
Longitudinal Travel: 66.9"
Cross Travel: 33.4"
Vertical Travel: 27.5"
Spindle Nose To Table Top: 4.7" to 33.4"
Load Capacity: 3300 lbs
Spindle Taper: BT40 or CAT40
Spindle Speed: 60 to 8000 rpm
Transmission Of Spindle & Motor: Belts
Spindle Center To Column Front Surface: 25.5"
T-Slot: 0.62" x 3 x 2.36"
.
Feed Rate
Rapid Feed Rate: X/Y/Z: 250 ipm AC
Cutting Feed Rate: 1 to 120 ipm
.
Motor
Spindle Motor/Max Torque: 15 H.P.
Feed Motors on XYZ: 3 kW - AC Servo
Coolant Pump: 1/8 H.P.
Coolant Tank Capacity: 16 Gallons
Lubrication Pump: 150W
.
Automatic Tool Changer
Maximum Tool Diameter: 3.5"
Maximum Tool Weight: 15 lbs
.
Warranty: One Year Limited Warranty
Horsepower: 32 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 194.7" x 125.7" x 118.5"
Weight: 18,700 lbs
Register to Discount
Starting At $98,120
Finance As Low As
$2,008.52 Per Mo.*
more pictures
Compare

10" x 54" Brand New Atrump CNC Vertical Knee Milling Machine, Mdl. 3VK Inverter 2+1, Centroid M400i Control with 15" Color LCD, 3 H.P. Spindle Motor, R8 Spindle Taper, 5000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B Coating Guide Way, Precision Ballscrews for High Accuracy & Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Standard Way Covers on All Three Axes, Precision APEC Class 7 Spindle Bearing to Ensure Spindle Runout Within 0.0002", Auto Lubrication System, Coolant System, Built-In Quartz Work Light, USB 2.0 Port, Leveling Bolts & Plate, Chip Tray, 60 GB Solid State Hard Drive, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manuals, #SM3VK2Plus1

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
3VK Inverter 2+1
Capacity: 10" x 54"
Stock: #SM3VK2Plus1
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 10" x 54"
Logitudinal Travel: 31"
Cross Travel: 14-1/2"
Quill Travel (Z Axis): 5" (Manual)
Spindle Nose to Table Top: 3/4" to 16-3/4"
Load Capacity: 600 lbs
Spindle Taper: R8
Spindle Speed: 70 to 5000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-7/8" to 23-1/2"
.
Head
Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees
.
Spindle Motor/Max-Torque: 3 H.P.
KVA Rating : 4 KVA, 15 Amps
Lubrication Pump: Automatic
.
Warranty: One Year Limited Warranty
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Dimensions (L x W x H): 108" x 77" x 92"
Weight: 3100 lbs
Register to Discount
Starting At $29,015
Finance As Low As
$593.94 Per Mo.*
more pictures
Compare

10" x 54" Brand New Atrump CNC Knee Milling Machine with Rigid Head & Moveable RAM, Mdl. 3VK Inverter Rigid Head with Moveable RAM, Centroid M400i Control with 15" Color LCD, 3 Axis Control, 3 H.P. Spindle Motor, R8 Spindle Taper, Programmable 50 to 5000 rpm Spindle Speed, Hardened & Ground with Turcite-B Coating Guide Way, Precision Ballscrews for High Accuracy & Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Moveable Arm with CNC Head Stock, Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, Standard Way Covers on All Three Axes, Built-In Quartz Work Light, Hard Limit Switch, MPG Hand Wheel Mounted on Head, USB 2.0 Port, Leveling Bolts & Plate, Chip Tray, Coolant System, Auto Lubrication System, On Shot Lube System, RS-232 Interface, 60 GB Solid State Hard Drive, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manual, #SM3VKMR

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
3VK Inverter Rigid Head with Moveable RAM
Capacity: 10" x 54"
Stock: #SM3VKMR
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 10" x 54"
Logitudinal Travel: 31"
Cross Travel: 14-1/2"
Quill Travel (Z Axis): 4.5"
Knee Travel (Manual): 16"
Quill Diameter: 3 3/8"
Spindle Nose to Table Top: 3/4" to 16-3/4"
Load Capacity: 600 lbs
Spindle Taper: R8
Spindle Speed: 70 to 5000 rpm with Hi/Lo Gear
Transmission of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-7/8" to 23-1/2"
.
Motor
Spindle Motor: 3 H.P.
KVA Rating : 4 KVA, 15 Amps
Lubrication Pump: Automatic
Coolant Tank Capacity: 7 Gallons
Power Requirements : 5 H.P., 3 Phase 208V to 230V (Max)
.
Warranty: One Year Limited Warranty
Dimensions (L x W x H): 108" x 77" x 92"
Weight: 3100 lbs
Horsepower: 5 H.P.
Voltage: 208V to 230V ~ 3 Phase
Register to Discount
Starting At $31,545
Finance As Low As
$645.73 Per Mo.*
more pictures
Compare

12" x 60" Brand New Atrump CNC Vertical Knee Milling Machine, Mdl. 4VK NC Inverter 2+1, Centroid M400i Control with 15" Color LCD, 5 H.P. Spindle Motor, #40 Spindle Taper, Programmable 4000 rpm Spindle Speed with Hi/Lo Gear, Hardened & Ground with Turcite-B Coating Guide Way, Precision Ballscrews for High Accuracy & Long Lasting, FC30 Mechanite Castings Main Frame With Annealed And Stress Relieved For Long Term Reliability, Anti-Rust Chrome Quill, Box Ways Design on Y & Z Axis to Provide Maximum Rigidity and Stability, Standard Way Covers on All Three Axes, Auto Lubrication System, Built-In Quartz Work Light, Hard Limit Switch, 2-Axis or 3rd Axis Simultaneous, One Shot Lubrication System, USB 2.0 Port, Lamp, Chip Tray, Coolant System, RS-232 Interface, 60 GB Solid State Hard Drive, Shop Floor Programming/ Conversational, Tool Box W/Tools, Operation Manual, #SM4VKNC

>> View Complete Specs

Atrump Milling Machines

Manufacturer: Atrump
Model:
4VK NC Inverter 2+1
Capacity: 12" x 60"
Stock: #SM4VKNC
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table: 12" x 60"
Longitudinal Travel: 38"
Cross Travel: 16.5"
Quill Travel (Z Axis): 5" Manual, 4.5" CNC
Knee Travel (Manual): 16.5"
Quill Diameter: 4"
Spindle Nose To Table Top: 2-1/4" to 21-3/4"
Load Capacity: 1000 lbs
Spindle Taper: #40
Spindle Speed: 70 to 4000 rpm with Hi/Lo Gear
Transmission Of Spindle & Motor: Timing Belt
Spindle Center To Column Front Surface: 6-3/8" to 27"
.
Head
Swivel (Left/Right): 90 Degrees
Tile (Front/Back): 45 Degrees
.
Motor
Spindle Motor: 5 H.P.
KVA Rating : 4KVA, 18 Amps
Coolant Tank Capacity: 7 Gallons
Lubrication Pump: Automatic
Warranty: One Year Limited Warranty
Power Requirement: 5 H.P., 3 Phase 208V to 230V (Max)
.
Dimensions (L x W x H): 124" x 75" x 92"
Weight: 4300 lbs
Register to Discount
Starting At $37,815
Finance As Low As
$774.07 Per Mo.*
more pictures
Compare

14"/20" x 40" Brand New Atrump Precision Gap Bed Engine Lathe, Mdl. LD-1440, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Gap Bed, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8", 4 Way Tool Post, Floor Stand, Face Plate 10", Complete Electric Control Unit, 3 Jaw Scroll Chuck 6", Tool Box & Kits, #SMLD1440

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
LD-1440
Capacity: 14"/20" x 40"
Stock: #SMLD1440
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Swing Over Bed: 14"
Swing Over Gap: 20-3/4"
Swing Over Saddle: 8-3/4"
Distance Between Centers: 40''
.
Bed
Width of Bed Ways: 7-9/16"
Top Slide Travel: 4"
Cross Slide Travel: 6-1/2"
.
Spindle
Spindle Nose Mounting: STD: D1-4
Spindle Bore: 1-1/2"
Spindle Nose Taper & Sleeve: Outer M.T. #5, Inner M.T. #3
Range of Spindle Speeds: 9 Speed Gear Change
  80 to 2000 rpm
.
Thread & Feed
Range of Inch Threads: 4 to 56 T.P.I. (32 kinds)
Range of Metric Threads: 0.4 to 7.0 (30 kinds)
Range of Longitudinal Feeds: 0.0026" to 0.0638"/rev
Range of Crossfeeds: 0.0013" to 0.03919"/rev
.
Tailstock
Quill Taper: M.T. #3
Quill Travel: 4"
.
Motor
Main Spindle Motor: 3 H.P
Coolant Pump Motor: 1/8 H.P.
.
Warranty: One Year Limited Warranty
Horsepower: 8.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 73" x 30" x 58"
Weight: 1367 lbs
Register to Discount
Starting At $10,610
Finance As Low As
$217.19 Per Mo.*
more pictures
Compare

17" x 42" Brand New Atrump Gear Head Gap Bed Engine Lathe, Mdl. 1743GH, Rigid, One Piece Thermally Balance Casting Bed, Meehanite Casting, One Piece Casting Floor Stand, Gap Bed, Inch And Metric Threading, Built-In Coolant System, Precision Taper Roller Bearings, Hardened & Ground Bed, Slide Ways & Gears, Heavy Duty Machine, Helps to Eliminate Machining Vibration & Extends Tools Life, Dead Center, Center Sleeve, Work Lamp, Back Plate 7" & 9", Steady Rest, Multi-Position Length Stop, 3 Jaw Chuck SK-9", Tool Box w/Tools, #SM1743GH

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
1743GH
Capacity: 17" x 42"
Stock: #SM1743GH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Height of Center from Leg Bottom: 42"
Swing Over Bed: 17''
Swing Over Cross Slide: 10-1/2"
Distance Between Centers: 42"
Swing In Gap: 24"
.
Bed
Width of Bed Ways: 11.8"
Total Travel of Top Slide: 4-3/4"
.
Headstock
Spindle Nose Mounting: STD: D1-6
Spindle Bore: 2-1/4"
Taper Of Spindle Bore: M.T. #6 x #4
Range of Spindle Speeds: 12 Speed
  35 to 2000 rpm
.
Thread & Feed
Lead Screw Diameter & Pitch: 1-1/8", 4 TPI
Range of Threads: 2 to 72 (44 changes) Inches
  0.2 to 14 (39 changes) Metric
Number of Feeds: 36
Range of Longitudinal Feeds: 0.0012" to 0.034"
Range of Crossfeeds: 1/2 of Longitudinal Feeds
.
Tailstock
Quill Diameter: 2-3/8"
Quill Taper: M.T. #4
Quill Travel: 6"
.
Coolant Pump Motor: 1/8 H.P.
.
Warranty: One Year Limited Warranty
Horsepower: 7.5 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (L x W x H): 91" x 42" x 60"
Weight: 3500 lbs
Register to Discount
Starting At $19,825
Finance As Low As
$405.82 Per Mo.*
more pictures
Compare

17"/24" x 67" Brand New Atrump Gear Head Engine Lathe, Mdl. 1767GH, Rigid, One Piece Thermally Balance Casting Bed, Meehanite Casting, One Piece Casting Floor Stand, Gap Bed, Inch And Metric Threading, Built-In Coolant System, Precision Taper Roller Bearings, Hardened & Ground Bed, Slide Ways & Gears, Heavy Duty Machine, Helps to Eliminate Machining Vibration & Extends Tools Life, 3 Jaw Chuck SK-9", Dead Center, Center Sleeve, Work Lamp, Back Plate 7" & 9", Steady Rest, Multi-Position Length Stop, Tool Box With Tools, #SM1767GH

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
1767GH
Capacity: 17"/24" x 67"
Stock: #SM1767GH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Overall Capacity: 17"/24" x 67"
Height of Center from Leg Bottom: 42-3/8"
Swing Over Bed: 17"
Swing Over Cross Slide: 10-3/4"
Swing Over Gap: 24"
Distance Between Centers: 67"
.
Bed
Width of Bed Ways: 12"
Total Travel of Top Slide: 4-3/4"
.
Headstock
Spindle Nose Mounting: STD: D1-6
Spindle Bore: 2-1/4"
Taper Of Spindle Bore: M.T. #6 x #4
Range of Spindle Speeds: 12 Speed
  35 to 2000 rpm
.
Thread & Feed
Lead Screw Diameter & Pitch: 1-1/8", 4 TPI
Range of Threads: 2 to 72 (44 changes) Inches
  0.2 to 14 (39 changes) Metric
Number of Feeds: 36
Range of Longitudinal Feeds: 0.0012" to 0.034"
Range of Crossfeeds: 1/2 of Longitudinal Feeds
.
Tailstock
Quill Diameter: 2-3/8"
Quill Taper: M.T. #4
Quill Travel: 6"
.
Coolant Pump Motor: 1/8 H.P.
.
Warranty: One Year Limited Warranty
Horsepower: 7.5 H.P.
Voltage
Dimension (L x W x H): 115" x 42" x 60"
Weight: 4000 lbs
Register to Discount
Starting At $21,220
Finance As Low As
$434.37 Per Mo.*
more pictures
Compare

42"/58" x 125" Brand New Atrump Heavy Duty Gap Bed Large Swing Center Lathe, Mdl. XT-42120, Chuck Guard with Limit Switch, 4 Way Tool Post with T-slots, Coolant System, 20 H.P. Motor with Y-Delta Start on 6/9/10" Bore Models, Auto Lube System, 4 Way Tool Post Lead Screw Support on 120", Thread Dial, Manual Tailstock with Saddle Pin Body Movement and Anti Slip Lock, Lockable Main Switch, 18 Step Manual Gear Change on 6/9/10" Bore Models, Halogen Work Light, Gears & Bed Ways Hardened and Ground, Leveling Bolts & Pads, Electrical Cabinet Ventilation Fans, Electromagnetic Spindle Brake, 6 Way Rapid Traverse, 6 Way Power Feed, Tool Box, Operation Manual, #SMXT42120

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
XT-42120
Capacity: 42"/58" x 125"
Stock: #SMXT42120
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 42"/58" x 125"
Swing Over Bed: 42'
Center Height: 22"
Swing Over Cross Slide: 29.52"
Swing Over Gap: 58.84"
Width of Gap: 22.44"
Width of Bed: 24"
Distance Between Centers: 125.98"
.
Workpiece Heights
Maximum Weight at Headstock: 4400 lbs
Between Centers Unsupported: 14520 lbs
.
Headstock
Spindle Bore: 6.1" Diameter
  A2 - 11
  5 ~ 610 rpm (18 Steps)
.
Carriage
Cross Slide Feeds: 0.00137" ~ 0.15748"
Cross Slide Travel: 27.55"
Compound Rest Travel: 14.96"
Tool Holder Size: 1.57" x 1.57"
.
Feeds & Threads
Lead Screw Diameter: 1.96" x 2TPI or 0.47"/pitch
Longitudinal Feeds: 0.00196" ~ 0.05984"
Cross Feeds: 0.000984" ~ 0.029921"
Threading Range (inch): 30 ~ 1 TPI
DP. Pitch Threads: 60 ~ 2 TPI
.
Tailstock
Tailstock Quill Diameter: 6.5"
Taper of Center: MT #6
Quill Travel: 11.8"
.
Power
Main Spindle Motor: 20 H.P.
Rapid Motor: 3/4 H.P.
Coolant Pump: 1/4 H.P.
Oil Pump: 12W
.
Weight: 17160 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $94,900
Finance As Low As
$1,942.60 Per Mo.*
more pictures
Compare

50"/67" x 125" Brand New Atrump Heavy Duty Gap Bed Large Swing Center Lathe , Mdl. XT-50120, Chuck Guard with Limit Switch, 4 Way Tool Post with T-slots, Coolant System, 20 H.P. Motor with Y-Delta Start on 6/9/10" Bore Models, Auto Lube System, 4 Way Tool Post Lead Screw Support on 120", Thread Dial, Manual Tailstock with Saddle Pin Body Movement and Anti Slip Lock, Lockable Main Switch, 18 Step Manual Gear Change on 6/9/10" Bore Models, Halogen Work Light, Gears & Bed Ways Hardened and Ground, Leveling Bolts & Pads, Electrical Cabinet Ventilation Fans, Electromagnetic Spindle Brake, 6 Way Rapid Traverse, 6 Way Power Feed, Tool Box, Operation Manual, #SMXT50120

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
XT-50120
Capacity: 50"/67" x 125"
Stock: #SMXT50120
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 50"/67" x 125"
Swing Over Bed: 50"
Center Height: 25.98"
Swing Over Cross Slide: 37.4"
Swing Over Gap: 67.71"
Width of Gap: 22.44"
Width of Bed: 24"
Distance Between Centers: 125.98"
.
Workpiece Heights
Maximum Weight at Headstock: 4400 lbs
Between Centers Unsupported: 14520 lbs
Between Centers with 1 Steady Rest: 16500 lbs
Between Centers with 2 Steady Rest: 18700 lbs
.
Headstock
Spindle Bore: 6.1" Diameter
  A2-11
  5~610 rpm (18 Steps)
.
Carriage
Cross Slide Feeds: 0.00137" ~ 0.15748"
Cross Slide Travel: 27.55"
Compound Rest Travel: 14.96"
Tool Holder Size: 1.57" x 1.57"
.
Feeds & Threads
Lead Screw Diameter: 1.96" x 2TPI or 0.47"/pitch
Longitudinal Feeds: 0.00196" ~ 0.05984"
Cross Feeds: 0.000984" ~ 0.029921"
Threading Range (inch): 30 ~ 1 TPI
DP. Pitch Threads: 60 ~ 2 TPI
.
Tailstock
Tailstock Quill Diameter: 6.5"
Taper of Center: MT #6
Quill Travel: 11.8"
.
Power
Main Spindle Motor: 20 H.P.
Rapid Motor: 3/4 H.P.
Coolant Pump: 1/4 H.P.
Oil Pump: 12W
.
Weight: 17160 lbs
Register to Discount
$98,900
Finance As Low As
$2,024.48 Per Mo.*
more pictures
Compare

18"/25" x 40" Brand New Atrump High Speed Precision Gap Bed Engine Lathe, Mdl. KC-1840, One Piece Stand, Rigid Construction Bed is Induction Hardened Over HRC50 and with Precision Ground, Apron Lead Screw/Feed Rod Reverse, Headstock Gears and Spline Shafts are Hardened and Ground for High Speed Running at Low Noise, Precision Taper Roller Bearings, Turcite-B Carriage and Cross Slide Ways, Double Independent Control of Longitudinal and Cross Feeds, Universal Gearbox Design allows Easy Selection of Inch/Metric Threading, Full Length Foot Brake, Full Length Splash Guard, Low Voltage Controls, Coolant System, One Shot Lube System, Motor & Electrics Control System, 4 Way Tool Post, 1 Back Plate for 3 Jaw Chuck, Threads Indicator, Feed Rod is Equipped with Over Load Safety Clutch, Center & Center Sleeve, Full Length Splash Guard, Halogen Lamp, Foot Brake, Leveling Block, Tool Box w/Tools, Operation Manual, #SMKC1840

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KC-1840
Capacity: 18"/25" x 40"
Stock: #SMKC1840
Category: Lathes
Subcategory: Precision, Engine
Condition: New Machinery
Capacity: 18"/25" x 40"
Height of Centers: 8.85"
Swing Over Bed: 18.11"
Swing over Cross Slide: 11"
Swing In Gap: 25.59"
Distance Between Center: 39.37"
Width of Bed: 14"
.
Saddle
Longitudinal Travel (Z): 39.37"
Cross Slide Travel (X): 8.66"
Compound Rest Travel: 4.72"
.
Headstock
Spindle Nose: D1 - 6
Spindle Bore: 2.20" Diameter
Taper of Spindle (Nose & Center): MT #6 x #4 for D1-6, MT #7 x #5 for D1-8
Spindle Speeds: 40 - 3100 rpm
.
Tailstock
Tailstock Quick Travel: 5.9"
Tailstock Quill Diameter: 2.04"
Tailstock Quil Taper: MT #5
.
Threading
Lead Screw: 4 TPI or .25"/pitch
Pitch Threads - Inch: 4 - 56 TPI (36 Kinds)
Pitch Threads - Metric: 0.5 - 7mm/pitch (24 Kinds)
Pitch Threads - Module: 0.25 - 3.5 M (16 Kinds)
DP Threads: 8 - 112 P (36 Kinds)
.
Feeding Range
Range of Longitudinal Feeds: 0.002" - 0.35"/rev.
Range of Crossfeeds: 0.001" - 0.017"/rev.
.
Warranty: One Year Limited Warranty
Motor
Spindle Drive Motor: 7.5 H.P.
Coolant Pump Motor: 1/8 H.P.
.
Weight: 4410 lbs
Register to Discount
Starting At $17,900
Finance As Low As
$366.41 Per Mo.*
more pictures
Compare

42"/58" x 125 Brand New Atrump Heavy Duty Gap Bed Large Swing Center Lathe, Mdl. XT-42200, Chuck Guard with Limit Switch, 4 Way Tool Post with T-slots, Coolant System, 20 H.P. Motor with Y-Delta Start on 6/9/10" Bore Models, Auto Lube System, 4 Way Tool Post Lead Screw Support on 120", Thread Dial, Manual Tailstock with Saddle Pin Body Movement and Anti Slip Lock, Lockable Main Switch, 18 Step Manual Gear Change on 6/9/10" Bore Models, Halogen Work Light, Gears & Bed Ways Hardened and Ground, Leveling Bolts & Pads, Electrical Cabinet Ventilation Fans, Electromagnetic Spindle Brake, 6 Way Rapid Traverse, 6 Way Power Feed, Tool Box, Operation Manual, #SMXT42200

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
XT-42200
Capacity: 42"/58" x 125
Stock: #SMXT42200
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 42"/58" x 125"
Swing Over Bed: 42"
Center Height: 22"
Swing Over Cross Slide: 29.52"
Swing Over Gap: 58.84"
Width of Gap: 22.44"
Width of Bed: 24"
Distance Between Centers: 125.98"
.
Workpiece Heights
Maximum Weight at Headstock: 4400 lbs
Between Centers Unsupported: 14520 lbs
Between Centers with 1 Steady Rest: 16500 lbs
Between Centers with 2 Steady Rest: 18700 lbs
.
Headstock
Spindle Bore: 6.1" Diameter
  A2-11
  5~610 rpm (18 Steps)
.
Carriage
Cross Slide Feeds: 0.00137" ~ 0.15748"
Cross Slide Travel: 27.55"
Compound Rest Travel: 14.96"
Tool Holder Size: 1.57" x 1.57"
.
Feeds & Threads
Lead Screw Diameter: 1.96" x 2TPI or 0.47"/pitch
Longitudinal Feeds: 0.00196" ~ 0.05984"
Cross Feeds: 0.000984" ~ 0.029921"
Threading Range (inch): 30 ~ 1 TPI
DP. Pitch Threads: 60 ~ 2 TPI
.
Tailstock
Tailstock Quill Diameter: 6.5"
Taper of Center: MT #6
Quill Travel: 11.8"
.
Power
Main Spindle Motor: 20 H.P.
Rapid Motor: 3/4 H.P.
Coolant Pump: 1/4 H.P.
Oil Pump: 12W
.
Weight: 17160 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $117,900
Finance As Low As
$2,413.41 Per Mo.*
more pictures
Compare

30" x 78" Brand New Atrump Heavy Duty CNC Lathe, Mdl. KL3080, Centroid T400i Control with 15" Color VGA LCD Screen, User Friendly Controls, X and Z Axes Ball Screw, Coolant System, Automatic Gear Shifting in 3 Gear Range, Auto Lube for X-Z Slide Ways & Ball Screw, 20 H.P. Main Motor with Inverter, Rear Splash Guard, Two Sliding Doors on Front (Semi-Enclosure Guard for Center Distance over 120"), Electric Cabinet to Suit CNC Control, Mounting Block for Tool Post, Halogen Work Light, Encoder for Spindle Speed, Electronic Hand Wheel for X-Z Axes, X & Z Dedicated Jog Buttons, Spindle & Brake Functions, PC Based, PC Style Sealed Full Feature Keyboard, Digital AC Servo Drives & Motors, 120 GB Solid State Hard Drive, USB 2.0 Port, RS-232, Mouse & Parallel Ports, PC Based Technology, Updateable & High Speed Block Throughout, Conversational Programming, Tool Path Graphics, Turning Cycles, Grooving Cycles, Drilling Cycles etc..., G-Codes & Full M-Function Control, Part Program, Storage & Editing, Axis Control, Feed Function, Utilities, Tool Box & Tools, #SMKL3080

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL3080
Capacity: 30" x 78"
Stock: #SMKL3080
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 30" x 78"
.
Swing Over Bed: 30"
Center Height to Bed: 15"
Center Height to Top Cross Slide: 9.5"
Swing Over Cross Slide: 19.5"
Distance Between Centers: 78.5"
Width of Bed: 17.5"
.
Headstock
Spindle Nose: A2-11
Spindle Bore: 4" Diameter
Spindle Speeds: High 1500 - 331 rpm
  Medium 330 - 93 rpm
  Low 92 - 24 rpm
Taper in Spindle: MT #6
.
Saddle
Longitudinal Travel: 78.5"
Cross Slide Travel: 17.5"
Size of Tool Holder: Boring Tool: 1.57" Diameter
  O.D./Facing Tool: 0.98" Diameter
Ball Screw (Diameter x Pitch): X Axis: 0.98" x 0.196"
  Z Axis: 1.96" x 0.39"
.
Tailstock
Quill Diameter: 4"
Quill Travel: 8.5"
Quill Taper: MT #5
.
Motor
Z Axis Drive Motor: 2 kW AC
X Axis Drive Motor: 1 kW AC
Coolant Pump Motor: 1/4 H.P.
.
X,Z Axes Feed
X Axis Rapid Travel: 240 ipm
Z Axis Rapid Travel: 240 ipm
.
Warranty: One Year Limited Warranty
Horsepower: 20 H.P.
Voltage
Dimensions (L x W x H): 160" x 77" x 70"
Weight: 11,000 lbs
Register to Discount
Starting At $78,960
Finance As Low As
$1,616.31 Per Mo.*
more pictures
Compare

25"/31" x 60" Brand New Atrump High Speed Precision Gap Bed Engine Lathe, Mdl. KC-2560, One Piece Stand, Rigid Construction Bed is Induction Hardened Over HRC50 and with Precision Ground, Apron Lead Screw/Feed Rod Reverse, Headstock Gears and Spline Shafts are Hardened and Ground for High Speed Running at Low Noise, Precision Taper Roller Bearings, Turcite-B Carriage and Cross Slide Ways, Double Independent Control of Longitudinal and Cross Feeds, Universal Gearbox Design allows Easy Selection of Inch/Metric Threading, Full Length Foot Brake, Full Length Splash Guard, Low Voltage Controls, Coolant System, One Shot Lube System, Motor & Electrics Control System, 1 Back Plate for 3 Jaw Chuck, 4 Way Tool Post, Threads Indicator, Feed Rod is Equipped with Over Load Safety Clutch, Center & Center Sleeve, Halogen Lamp, Leveling Block, Tool Box With Tools, Operation Manual, #SMKC2560

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KC-2560
Capacity: 25"/31" x 60"
Stock: #SMKC2560
Category: Lathes
Subcategory: Precision, Engine
Condition: New Machinery
Capacity: 25"/31" x 60"
Height of Centers: 12.4"
Swing Over Bed: 24.8"
Swing Over Cross Slide: 17.71"
Swing In Gap: 31.88"
Distance Between Center: 59.05"
Width of Bed: 14"
.
Saddle
Longitudinal Travel (Z): 59.05"
Cross Slide Travel (X): 12.99"
Compound Rest Travel: 5.9"
.
Headstock
Spindle Nose: ISO D1-8
Spindle Bore: 3.34"
Taper of Spindle (Nose & Center): MT #7 x #5
Spindle Speeds: 25-1550 rpm (3.34" Diameter), 23-1300 rpm (4.13" Diameter), 15-830 rpm (6.1" Diameter)
.
Tailstock
Tailstock Quill Travel: 6.69"
Tailstock Quill Diameter: 2.95"
.
Threading
Lead Screw: 4 TPI or .25"/pitch
Pitch Threads - Inch: 4 - 56 TPI (36 Kinds)
Pitch Threads - Metric: 0.5 - 7mm/pitch (24 Kinds)
Pitch Threads - Module: 0.25 - 3.5 M (16 Kinds)
DP Threads: 8 - 112 P (36 Kinds)
.
Feeding Range
Range of Longitudinal Feeds: 0.002" - 0.35"/rev.
Range of Crossfeeds: 0.001" - 0.017"/rev.
.
Motor
Spindle Drive Motor: 10 H.P.
Coolant Pump Motor: 1/8 H.P.
.
Weight: 6504 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $25,300
Finance As Low As
$517.89 Per Mo.*
more pictures
Compare

33"/38" x 80" Brand New Atrump High Speed Precision Gap Bed Engine Lathe, Mdl. KC-3380, One Piece Stand, Rigid Construction Bed is Induction Hardened Over HRC50 and with Precision Ground, Apron Lead Screw/Feed Rod Reverse, Headstock Gears and Spline Shafts are Hardened and Ground for High Speed Running at Low Noise, Precision Taper Roller Bearings, Turcite-B Carriage and Cross Slide Ways, Double Independent Control of Longitudinal and Cross Feeds, Universal Gearbox Design allows Easy Selection of Inch/Metric Threading, Full Length Foot Brake, Full Length Splash Guard, Low Voltage Controls, Motor & Electrics Control System, Coolant System, One Shot Lube System, 1 Back Plate for 3 Jaw Chuck, 4 Way Tool Post, Threads Indicator, Feed Rod is Equipped with Over Load Safety Clutch, Center & Center Sleeve, Full Length Splash Guard, Halogen Lamp, Foot Brake, Leveling Block, Tool Box W/Tools, Operation Manual, #SMKC3380

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KC-3380
Capacity: 33"/38" x 80"
Stock: #SMKC3380
Category: Lathes
Subcategory: Precision, Engine
Condition: New Machinery
Capacity: 33"/38" x 80"
Height of Centers: 16.53"
Swing Over Bed: 33.07"
Swing Over Cross Slide: 22.44"
Distance Between Center: 82.67"
Width of Bed: 17.71"
.
Main Spindle
Spindle Nose: A2-11
Spindle Bore: 4.13"
Spindle Speeds: 4.13" Diameter: 20 - 1500 rpm/6" Diameter: 10 - 800 rpm
  18 Steps
.
Carriage
Gross Slide Travel: 17.71"
Compound Rest Travel: 9.84"
.
Tailstock
Tailstock Spindle Diameter: 4.13"
Tailstock Spindle Travel: 8.66"
Tailstock Spindle Taper: MT #5
.
Threading
Lead Screw: 2 TPI or 0.47"/pitch
Pitch Threads - Inch: 2 - 28 TPI (36 Kinds)
Pitch Threads - Metric: 0.0031" - 0.55"/pitch (65 Kinds)
Pitch Threads - Module: 0.5 - 7 M (22 Kinds)
DP Threads: 4 - 56 TPI (36 Kinds)
.
Feeding Range
Range of Longitudinal Feeds: 0.001" - 0.027"/rev
Range of Crossfeeds: 0.0009" x 0.0137"/rev
.
Motor
Spindle Drive Motor: 15 H.P.
Rapid Feed Motor: 1/4 H.P.
Coolant Pump Motor: 1/4 H.P.
.
Weight: 8488 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $43,600
Finance As Low As
$892.49 Per Mo.*
more pictures
Compare

33"/40" x 200" Brand New Atrump High Speed Precision Gap Bed Engine Lathe, Mdl. KC-33200, One Piece Stand, Rigid Construction Bed is Induction Hardened Over HRC50 and with Precision Ground, Apron Lead Screw/Feed Rod Reverse, Headstock Gears and Spline Shafts are Hardened and Ground for High Speed Running at Low Noise, Precision Taper Roller Bearings, Turcite-B Carriage and Cross Slide Ways, Double Independent Control of Longitudinal and Cross Feeds, Universal Gearbox Design allows Easy Selection of Inch/Metric Threading, Full Length Foot Brake, Full Length Splash Guard, Low Voltage Controls, Motor & Electrics Control System, Coolant System, One Shot Lube System, 1 Back Plate for 3 Jaw Chuck, 4 Way Tool Post, Threads Indicator, Feed Rod is Equipped with Over Load Safety Clutch, Center & Center Sleeve, Full Length Splash Guard, Halogen Lamp, Foot Brake, Leveling Block, Tool Box W/Tools, Operation Manual, #SMKC33200

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KC-33200
Capacity: 33"/40" x 200"
Stock: #SMKC33200
Category: Lathes
Subcategory: Precision, Engine
Condition: New Machinery
Capacity: 33"/40" x 200"
Height of Centers: 16.53"
Swing Over Bed: 33.07"
Swing Over Cross Slide: 22.44"
Distance Between Center: 200.78"
Width of Bed: 17.71"
.
Main Spindle
Spindle Nose: A2-11
Spindle Bore: 4.13"
Spindle Speeds: 4.13" Diameter: 20 - 1500 rpm/6" Diameter: 10 - 800 rpm
  18 Steps
.
Carriage
Gross Slide Travel: 17.71"
Compound Rest Travel: 9.84"
.
Tailstock
Tailstock Spindle Diameter: 4.13"
Tailstock Spindle Travel: 8.66"
Tailstock Spindle Taper: MT #5
.
Threading
Lead Screw: 2 TPI or 0.47"/pitch
Pitch Threads - Inch: 2 - 28 TPI (36 Kinds)
Pitch Threads - Metric: 0.0031" - 0.55"/pitch (65 Kinds)
Pitch Threads - Module: 0.5 - 7 M (22 Kinds)
DP Threads: 4 - 56 TPI (36 Kinds)
.
Feeding Range
Range of Longitudinal Feeds: 0.001" - 0.027"/rev
Range of Crossfeeds: 0.0009" x 0.0137"/rev
.
Motor
Spindle Drive Motor: 15 H.P.
Rapid Feed Motor: 1/4 H.P.
Coolant Pump Motor: 1/4 H.P.
.
Weight: 11795 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $73,600
Finance As Low As
$1,506.59 Per Mo.*
more pictures
Compare

16" x 37" Brand New Atrump CNC Flat Bed Tool Room Lathe, Mdl. KL1640NC, Centroid T400i Control with 15" Color LCD, 7.5 H.P. Spindle Motor, D1-6, 2-1/8" through Hole Spindle, Max. 3000 rpm Spindle Speed with Auto 2 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, Positioning Accuracy: +/-0.0004", Reputability: +/- 0.0002", FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SMKL1640NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL1640NC
Capacity: 16" x 37"
Stock: #SMKL1640NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Basic Dimensions
Height of Center: 8"
Swing Over Bed: 16"
Swing Over Cross Slide: 9"
Distance Between Centers: 37.4"
.
Bed
Width of Bed Ways: 11.8"
.
Spindle
Spindle Nose Mounting: STD: D1-6
Spindle Bore: STD: 2-1/8"
Taper of Spindle Bore: MT #6 (Sleeve MT #4)
Range of Spindle Speeds: Auto 2 Speed Shift
  25 - 3000 rpm
Longitudinal Travel (Z Axis): 31.5"
Cross Slide Travel (X Axis): 7.4"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 3/4"
.
Tailstock
Quill Diameter: 2"
Quill Taper: MT #4
Quill Travel: 6"
.
Motor
Main Spindle Motor: 7.5 H.P.
.
Coolant Tank Capacity: 20 Gallons
Power Requirements: 16 H.P., 3 Phase, 208V to 230V (Max)
Crate Dimensions (L x W x H): 96" x 74" x 77"
Weight: 3630 lbs
Warranty: One Year Limited Warranty
Register to Discount
Starting At $38,750
Finance As Low As
$793.21 Per Mo.*
more pictures
Compare

17" x 39" Brand New Atrump CNC Lathe, Mdl. KL1640 Plus, Centroid T400i Control with 15" Color LCD, 7.5 H.P. Spindle Motor, D1-6, 2-1/8" through Hole Spindle, 2500 rpm Spindle Speed with Auto 2 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, Positioning Accuracy: +/-0.0004", Reputability: +/- 0.0002", FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SMKL1640Plus

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL1640 Plus
Capacity: 17" x 39"
Stock: #SMKL1640Plus
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Basic Dimensions
Height of Center: 8.6"
Swing Over Bed: 17.3"
Swing Over Cross Slide: 9.4"
Distance Between Centers: 39.3"
.
Bed
Width of Bed Ways: 11.8"
.
Spindle
Spindle Nose Mounting: D1-6
Spindle Bore: 2-1/8"
Taper of Spindle Bore: MT #6
Range of Spindle Speeds: L: 50 - 355 rpm
  H: 352 - 2500 rpm
Longitudinal Travel (Z Axis): 31.5"
Cross Slide Travel (X Axis): 8.1"
Rapid Travel/Cutting Feed Rate: 590/196 ipm
.
Tool
Max. Size Cutting Tool: 1"
.
Tailstock
Quill Diameter: 2"
Quill Taper: MT #4
Quill Travel: 5.9"
.
Coolant Tank Capacity: 20 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 7.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 86" x 47" x 62"
Weight: 3520 lbs
Register to Discount
Starting At $38,750
Finance As Low As
$793.21 Per Mo.*
more pictures
Compare

18" x 39" Brand New Atrump CNC Lathe, Mdl. KL1840NC, Centroid T400i Control with 15" Color LCD, 7.5 H.P. Spindle Motor, A1-6, 2-1/8" through Hole Spindle, Max. 3000 rpm Spindle Speed with Auto 2 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SMKL1840NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL1840NC
Capacity: 18" x 39"
Stock: #SMKL1840NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 18" x 39"
.
Height of Center: 9"
Swing Over Bed: 18"
Swing Over Cross Slide: 9"
Distance Between Centers: 39.4"
.
Bed
Width of Bed Ways: 11.8"
.
Spindle
Spindle Nose Mounting: STD: A1-6 or D1-6
Spindle Bore: STD: 2-1/8"
Taper of Spindle Bore: MT #6 (Sleeve MT #4)
Range of Spindle Speeds: Auto 2 Speed Shift
  60 to 3000 rpm
Longitudinal Travel (Z Axis): 32"
Cross Slide Travel (X Axis): 11"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1"
.
Tailstock
Quill Diameter: 2-1/4"
Quill Taper: MT #4
Quill Travel: 6-1/2"
.
Coolant Tank Capacity: 20 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 7.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96" x 74" x 77"
Weight: 4400 lbs
Register to Discount
Starting At $41,750
Finance As Low As
$854.62 Per Mo.*
more pictures
Compare

43" x 24" x 27" Brand New Atrump Vertical CNC Machining Center, Mdl. M1100 (Fanuc), Fanuc Oi-MD Control with 8.4" Color LCD, Armless Type 20 Tool ATC, 15 H.P. Spindle Motor, CAT40/BT40 Spindle Taper, 8000 rpm Spindle Speed with Spindle Oil Cooler, Hardened & Ground with Turcite-B Coating Guide Way, Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Meehanite Casting Main Frame, 100% Laser Tested for Positioning Accuracy & Repeatability, Telescopic Steel Way Covers on all Three Axes, Coolant System, Air Blast System, Central Lubrication System, Built In Quartz Work Light, Boster (Unclamp) Cylinder, Full Enclosure, Screw Type Chip Auger, Automatic Lubrication System, Power Chain, Spindle Chiller, Electric Cabinet Set with Bracket, Air Gun & Spindle Air Blast, Encoder Set, Tool Box & Tools, Operation Manual, 4 Box Ways Design on Y Axis to Provide Maximum Rigidity & Stability, #SMM1100 (Fanuc)

>> View Complete Specs

Atrump Machining Centers

Manufacturer: Atrump
Model:
M1100 (Fanuc)
Capacity: 43" x 24" x 27"
Stock: #SMM1100 (Fanuc)
Category: Machining Centers
Subcategory: Vertical, CNC
Condition: New Machinery
Specifications
X/Y/Z Travel: 43.3" / 24" / 27.5"
Distance From Spindle to Column: 25.8"
Distance From Spindle to Table Top: 5.5" ~ 33"
.
Working Table
Size (X/Y): 49.6" / 23.6"
T-Slot: 0.7" x 5 x 4.7"
Load Capacity: 2200 lbs
.
Spindle
Spindle Motor: 15 H.P.
Spindle Speed: 8,000 RPM
Spindle Taper: CAT40 / BT40
.
Feed Rate
Rapid Feed Rate (X/Y/Z): X/Z: 960 ipm AC, Y: 800 ipm
Cutting Feed Rate: 1 to 400 ipm
.
ATC
Tool Magazine Capacity: Armless 20 Tool
Max. Tool Diameter: 3.1"
Adj. Pocket Empty Diameter: 5.9"
Max. Tool Length : 11.8"
Max. Tool Weight: 15.4 Lbs.
.
Power Requirements: 42 H.P.
Coolant Tank Capacity : 63.4 Gallons
.
Dimensions (L x W x H): 144" x 97" x 116"
Weight: 14,300 lbs
Warranty: 1 Year Limited Warranty
Register to Discount
Starting At $105,550
Finance As Low As
$2,160.61 Per Mo.*
more pictures
Compare

17" x 38" Brand New Atrump CNC Lathe, Mdl. 1740NC, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 1800 rpm Spindle Speed with Auto 3 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SM1740NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
1740NC
Capacity: 17" x 38"
Stock: #SM1740NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 17" x 38"
.
Height of Center: 8.5"
Swing Over Bed: 17"
Swing Over Cross Slide: 7.5"
Distance Between Centers: 38.4"
.
Bed
Width of Bed Ways: 13"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto 3 Speed Shift
  10 to 1800 rpm Nose Test Max 78dB
Longitudinal Travel (Z Axis): 36.5"
Cross Slide Travel (X Axis): 11"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1"
.
Tailstock
Quill Diameter: 3"
Quill Taper: MT #5
Quill Travel: 6-1/4"
.
Coolant Tank Capacity: 20 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96" x 74" x 77"
Weight: 4000 lbs
Register to Discount
Starting At $42,890
Finance As Low As
$877.96 Per Mo.*
more pictures
Compare

19" x 60" Brand New Atrump CNC Lathe, Mdl. 1960NC, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 1800 rpm Spindle Speed with Auto 3 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SM1960NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
1960NC
Capacity: 19" x 60"
Stock: #SM1960NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 19" x 60"
.
Height of Center: 10"
Swing Over Bed: 19"
Swing Over Cross Slide: 10.2"
Distance Between Centers: 60"
.
Bed
Width of Bed Ways: 13"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto 3 Speed Shift
  10 to 1800 rpm Nose Test Max 78dB
Longitudinal Travel (Z Axis): 56.25
Cross Slide Travel (X Axis): 11"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1"
.
Tailstock
Quill Diameter: 3"
Quill Taper: MT #5
Quill Travel: 6-1/4"
.
Coolant Tank Capacity: 20 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96" x 74" x 79"
Weight: 5060 lbs
Register to Discount
Starting At $47,930
Finance As Low As
$981.13 Per Mo.*
more pictures
Compare

20" x 18" Brand New Atrump Diamond Cut Alloy Wheel Lathe, Mdl. VTL30, Control Features:, Syntec 21MA Controller, With Series Bus Connection, High Speed, High Precision Machining (HSHP), Smooth Precision Advanced (SPA), Path Smoothing, High Precision Contour Control (HPCC), Graphic Conversational Input, Machine Features:, 10 H.P. Spindle, A2-6 Spindle Taper, 60~1000 rpm Spindle Speed, 30" Max. Turning Diameter, Meehanite Integrated Casting, Heavy Duty Roller Type Linear Guideway, C5 Double Nut Precision Ball Screws, Digitizing Package with Software, 2 Iscar Cutting Tool, Full Enclosure, Way Covers, 4 Way Tool Post, 2 Inserts (Diamond & Carbide), Halogen Work Light, Chip Cart, Auto Lubrication, M4 Stylus L=1.57", RS-232 & Ethernet Ports, Tool Box & Tools, Operation Manual, #SMVTL30

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
VTL-30
Capacity: 20" x 18"
Stock: #SMVTL30
Category: Lathes
Subcategory: Vertical Turning Center, VTL, CNC and Manual
Condition: New Machinery
Travel
X-Axis Travel: 20"
Z-Axis Travel: 18"
Max. Turning Diameter: 30"
.
Table
Jaw Chuck: 15" with 3 Step Soft Jaw (Manual)
Gripping O.D. Range: 14"~30"
.
Distance
Distance from Spindle End to Table: 0"~18"
Spindle Nose Taper/Tool: A2-6
.
Spindle
Spindle Speed: 60~1000 rpm
Spindle Type: Belt Drive
Warranty: One Year Limited Warranty
Spindle Motor (4P): 10 H.P.
2 Axes Servo Motor (X/Z): 1.15/1.15 H.P.
.
Feed
X Axis Rapid Traverse: 393 ipm
Z Axis Rapid Traverse: 393 ipm
Cutting Feed Rate: 393 ipm
.
Connected Electricity: 20 H.P.
Dimensions (L x W x H): 63" x 76" x 104"
Shipping Dimensions (L x W x H): 69" x 76" x 104"
Weight: 5000 lbs
Register to Discount
Starting At $56,000
Finance As Low As
$1,146.32 Per Mo.*
more pictures
Compare

17" x 60" Brand New Atrump CNC Lathe, Mdl. 1760NC, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 1800 rpm Spindle Speed with Auto 3 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SM1760NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
1760NC
Capacity: 17" x 60"
Stock: #SM1760NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 17" x 60"
.
Height of Center: 8.5"
Swing Over Bed: 17"
Swing Over Cross Slide: 7.5"
Distance Between Centers: 60"
.
Bed
Width of Bed Ways: 13"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto 3 Speed Shift
  10 to 1800 rpm Nose Test Max 78dB
Longitudinal Travel (Z Axis): 55"
Cross Slide Travel (X Axis): 11"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1"
.
Tailstock
Quill Diameter: 3"
Quill Taper: MT #5
Quill Travel: 6-1/4"
.
Coolant Tank Capacity: 20 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 116" x 74" x 77"
Weight: 4300 lbs
Register to Discount
Starting At $45,690
Finance As Low As
$935.27 Per Mo.*
more pictures
Compare

19" x 40" Brand New Atrump CNC Lathe, Mdl. 1940NC, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 1800 rpm Spindle Speed with Auto 3 Speed Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, Rugged Cast Iron Design to Provide Maximum Rigidity & Stability, Shop Floor Programming/Conversational, Coolant System, Central Lubrication System, Dual Hand Wheel for Manual Operation, Built-In Quartz Work Light, Leveling Bolts & Plate, Full Guarding, RS-232 Interface, USB 2.0 Port, 60 GB Solid State Hard Drive, Tool Box & Tools, Operation Manual, #SM1940NC

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
1940NC
Capacity: 19" x 40"
Stock: #SM1940NC
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 19" x 40"
.
Height of Center: 10"
Swing Over Bed: 19"
Swing Over Cross Slide: 10.2"
Distance Between Centers: 40''
.
Bed
Width of Bed Ways: 13"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto 3 Speed Shift
  10 to 1800 rpm Nose Test Max 78dB
Longitudinal Travel (Z Axis): 36.5"
Cross Slide Travel (X Axis): 11"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1"
.
Tailstock
Quill Diameter: 3"
Quill Taper: MT #5
Quill Travel: 6-1/4"
.
Coolant Tank Capacity: 20 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96" x 74" x 79"
Weight: 4620 lbs
Register to Discount
Starting At $45,130
Finance As Low As
$923.81 Per Mo.*
more pictures
Compare

21" x 40" Brand New Atrump CNC Lathe, Mdl. KL2140, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14" Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2140

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL2140
Capacity: 21" x 40"
Stock: #SMKL2140
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 21" x 40"
.
Height of Center: 10.53"
Swing Over Bed: 21"
Swing Over Cross Slide: 12"
Distance Between Centers: 40"
Width of Bed Ways: 13.78"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High - Middle - Low
  2000~491 - 490~125 - 124~25 rpm
Longitudinal Travel (Z Axis): 31.5"
Cross Slide Travel (X Axis): 11.6"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1 " (4 Way Tool Post)
.
Tailstock
Quill Diameter: 2.5"
Quill Taper: MT #5
Quill Travel: 7"
.
Coolant Tank Capacity: 6 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96" x 74" x 77"
Weight: 6270 lbs
Register to Discount
Starting At $51,100
Finance As Low As
$1,046.02 Per Mo.*
more pictures
Compare

21" x 60" Brand New Atrump CNC Lathe, Mdl. KL2160, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14" Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2160

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL2160
Capacity: 21" x 60"
Stock: #SMKL2160
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 21" x 60"
.
Height of Center: 10.53"
Swing Over Bed: 21"
Swing Over Cross Slide: 12"
Distance Between Centers: 60"
Width of Bed Ways: 13.78"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High - Middle - Low
  2000~491 - 490~125 - 124~25 rpm
Longitudinal Travel (Z Axis): 51.2"
Cross Slide Travel (X Axis): 11.6"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1 " (4 Way Tool Post)
.
Tailstock
Quill Diameter: 2.5"
Quill Taper: MT #5
Quill Travel: 7"
.
Coolant Tank Capacity: 6 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 126" x 74" x 77"
Weight: 6930 lbs
Register to Discount
Starting At $53,690
Finance As Low As
$1,099.03 Per Mo.*
more pictures
Compare

21" x 80" Brand New Atrump CNC Lathe, Mdl. KL2180, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14" Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2180

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL2180
Capacity: 21" x 80"
Stock: #SMKL2180
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 21" x 80"
.
Height of Center: 10.53"
Swing Over Bed: 21"
Swing Over Cross Slide: 12"
Distance Between Centers: 80"
Width of Bed Ways: 13.78"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High - Middle - Low
  2000~491 - 490~125 - 124~25 rpm
Longitudinal Travel (Z Axis): 70.86"
Cross Slide Travel (X Axis): 11.6"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1 " (4 Way Tool Post)
.
Tailstock
Quill Diameter: 2.5"
Quill Taper: MT #5
Quill Travel: 7"
.
Coolant Tank Capacity: 6 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 136" x 74" x 77"
Weight: 7700 lbs
Register to Discount
Starting At $56,275
Finance As Low As
$1,151.95 Per Mo.*
more pictures
Compare

24" x 40" Brand New Atrump CNC Lathe, Mdl. KL2440, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14" Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2440

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL2440
Capacity: 24" x 40"
Stock: #SMKL2440
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 24" x 40"
.
Height of Center: 12"
Swing Over Bed: 24"
Swing Over Cross Slide: 13.5"
Distance Between Centers: 40"
Width of Bed Ways: 13.78"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High - Middle - Low
  2000~491 - 490~125 - 124~25 rpm
Longitudinal Travel (Z Axis): 34.5"
Cross Slide Travel (X Axis): 11.6"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1 " (4 Way Tool Post)
.
Tailstock
Quill Diameter: 2.5"
Quill Taper: MT #5
Quill Travel: 7"
.
Coolant Tank Capacity: 6 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 96" x 74" x 77"
Weight: 6270 lbs
Register to Discount
Starting At $53,100
Finance As Low As
$1,086.96 Per Mo.*
more pictures
Compare

24" x 60" Brand New Atrump CNC Lathe, Mdl. KL2460, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14" Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2460

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL2460
Capacity: 24" x 60"
Stock: #SMKL2460
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 24" x 60"
.
Height of Center: 12"
Swing Over Bed: 24"
Swing Over Cross Slide: 13.5"
Distance Between Centers: 60"
Width of Bed Ways: 13.78"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High - Middle - Low
  2000~491 - 490~125 - 124~25 rpm
Longitudinal Travel (Z Axis): 53"
Cross Slide Travel (X Axis): 11.6"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1 " (4 Way Tool Post)
.
Tailstock
Quill Diameter: 2.5"
Quill Taper: MT #5
Quill Travel: 7"
.
Coolant Tank Capacity: 6 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 126" x 74" x 77"
Weight: 6930 lbs
Register to Discount
Starting At $55,690
Finance As Low As
$1,139.97 Per Mo.*
more pictures
Compare

24" x 80" Brand New Atrump CNC Lathe, Mdl. KL2480, Centroid T400i Control with 15" Color LCD, 10 H.P. Spindle Motor, D1-8, 3-3/8" through Hole Spindle, Max. 2000 rpm Spindle Speed with Auto Shift 3 Gear Range, Hardened & Ground with Turcite-B Coating Guide Way, C5 Double Nut Precision Ball Screws Hardened & Ground for High Accuracy & Long Lasting, FC30 Mechanite Casting Main Frame with Annealed & Stressed Relieved for Long Term Reliability, 100% Laser Tested for Positioning Accuracy & Repeatability, Massive One Piece Casting Construction for Maximum Cutting Performance, 14" Wide Bed Ways Designed to Provide Maximum Rigidity & Stability, Coolant System, Central Lubrication System, Built-In Quartz Work Light, Dual Hand Wheel for Manual Operation, USB 2.0 Port, RS-232 Interface, 60 GB Solid State Hard Drive, Leveling Bolts & Plate, Full Guarding, Shop Floor Programming/Conversational, Tool Box & Tools, Operation Manual, #SMKL2480

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL2480
Capacity: 24" x 80"
Stock: #SMKL2480
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 24" x 80"
.
Height of Center: 12"
Swing Over Bed: 24"
Swing Over Cross Slide: 13.5"
Distance Between Centers: 80"
Width of Bed Ways: 13.78"
.
Spindle
Spindle Nose Mounting: STD: D1-8
Spindle Bore: STD: 3-3/8"
Taper of Spindle Bore: MT #7 (Sleeve MT #5)
Range of Spindle Speeds: Auto Shift High - Middle - Low
  2000~491 - 490~125 - 124~25 rpm
Longitudinal Travel (Z Axis): 72.8"
Cross Slide Travel (X Axis): 11.6"
Rapid Travel/Cutting Feed Rate: 270/120 ipm
.
Tool
Max. Size Cutting Tool: 1 " (4 Way Tool Post)
.
Tailstock
Quill Diameter: 2.5"
Quill Taper: MT #5
Quill Travel: 7"
.
Coolant Tank Capacity: 6 Gallons
.
Warranty: One Year Limited Warranty
Horsepower: 10 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 136" x 74" x 77"
Weight: 7700 lbs
Register to Discount
Starting At $58,275
Finance As Low As
$1,192.89 Per Mo.*
more pictures
Compare

16"/21" x 40" Brand New Atrump Precision Gap Bed Engine Lathe, Mdl. LD-1640, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8", 3 Jaw Scroll Chuck 6", 4 Way Tool Post, Floor Stand, Follow Rest, Face Plate 10", D1-6 Back Plate 8", Complete Electric Control Unit, Tool Box & Kits, #SMLD1640

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
LD-1640
Capacity: 16"/21" x 40"
Stock: #SMLD1640
Category: Lathes
Subcategory: Precision, Engine
Condition: New Machinery
Basic Dimension: 16"/21" x 40"
Swing Over Bed: 16"
Swing Over Gap: 21-3/4"
Swing Over Cross Slide: 9-1/2"
Distance Between Centers: 40"
.
Bed
Width of Bed Ways: 10"
Top Slide Travel: 4"
Cross Slide Travel: 8"
.
Spindle
Spindle Nose Mounting: D1-6
Spindle Bore: 2-3/16"
Spindle Nose Taper & Sleeve: Outer M.T. #5, Inner M.T. #3
Range of Spindle Speeds: 12 Speed Gear Change
  50 to 2000 rpm
.
Thread & Feed
Range of Inch Threads: 4 to 56 T.P.I. (32 kinds)
Range of Metric Threads: 0.4 to 7.0 (30 kinds)
Range of Longitudinal Feeds: 0.0017" to 0.0242"/rev
Range of Crossfeeds: 0.0013" to 0.03919"/rev
.
Tailstock
Quill Taper: M.T. #4
Quill Travel: 4-3/8"
.
Motor
Main Spindle Motor: 5 H.P.
Coolant Pump Motor: 1/8 H.P.
.
Warranty: One Year Limited Warranty
Horsepower: 8.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 82" x 34" x 60"
Weight: 1896 lbs
Register to Discount
Starting At $13,950
Finance As Low As
$285.56 Per Mo.*
more pictures
Compare

16"/21" x 60" Brand New Atrump Precision Engine Lathe, Mdl. LD-1660, Hardened & Ground Bed Ways, Hardened & Ground Gears in Headstock, Rapid Foot Break, Precision Taper Roller Bearing, Feed Rod is Equipped with Over Load Safety Clutch, Apron Equipped with Interlocking Device to Prevent Feeding Inter-Gearing During Automatic Feeding, Change Gears, Rear Splash Guard, Steady Rest, 4 Jaw Independent Chuck 8", 3 Jaw Scroll Chuck 6", 4 Way Tool Post, Floor Stand, Follow Rest, Face Plate 10", D1-6 Back Plate 8", Complete Electric Control Unit, Tool Box & Kits, #SMLD1660

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
LD-1660
Capacity: 16"/21" x 60"
Stock: #SMLD1660
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 16"/21" x 60"
Swing Over Bed: 16"
Swing Over Gap: 21-3/4"
Swing Over Cross Slide: 9-1/2"
Distance Between Centers: 60"
.
Bed
Width of Bed Ways: 10"
Top Slide Travel: 4"
Cross Slide Travel: 8"
.
Spindle
Spindle Nose Mounting: D1-6
Spindle Bore: 2-3/16"
Spindle Nose Taper & Sleeve: Outer MT #6, Inner MT #5
Range of Spindle Speeds: 12 Speed Gear Change
  50 to 2000 rpm
.
Thread & Feed
Range of Inch Threads: 4 to 56 T.P.I. (32 kinds)
Range of Metric Threads: 0.4 to 7.0 (30 kinds)
Range of Longitudinal Feeds: 0.0017" to 0.0242"/rev
Range of Crossfeeds: 0.0013" to 0.03919"/rev
.
Tailstock
Quill Taper: M.T. #4
Quill Travel: 4-3/8"
.
Motor
Main Spindle Motor: 5 H.P.
Coolant Pump Motor: 1/8 H.P.
.
Warranty: One Year Limited Warranty
Horsepower: 8.5 H.P.
Voltage: 208V to 230V (Max) ~ 3 Phase
Dimensions (L x W x H): 102" x 34" x 60"
Weight: 2249 LBS
Register to Discount
Starting At $15,600
Finance As Low As
$319.33 Per Mo.*
more pictures
Compare

30" x 59" Brand New Atrump Heavy Duty CNC Lathe, Mdl. KL3060, Centroid T400i Control with 15" Color VGA LCD Screen, User Friendly Controls, X and Z Axes Ball Screw, Coolant System, Automatic Gear Shifting in 3 Gear Range, Auto Lube for X-Z Slide Ways & Ball Screw, 20 H.P. Main Motor with Inverter, Rear Splash Guard, Two Sliding Doors on Front (Semi-Enclosure Guard for Center Distance over 120"), Electric Cabinet to Suit CNC Control, Mounting Block for Tool Post, Halogen Work Light, Encoder for Spindle Speed, Electronic Hand Wheel for X-Z Axes, X & Z Dedicated Jog Buttons, Spindle & Brake Functions, PC Based, PC Style Sealed Full Feature Keyboard, Digital AC Servo Drives & Motors, 120 GB Solid State Hard Drive, USB 2.0 Port, RS-232, Mouse & Parallel Ports, PC Based Technology, Updateable & High Speed Block Throughout, Conversational Programming, Tool Path Graphics, Turning Cycles, Grooving Cycles, Drilling Cycles etc..., G-Codes & Full M-Function Control, Part Program, Storage & Editing, Axis Control, Feed Function, Utilities, Tool Box & Tools, #SMKL3060

>> View Complete Specs

Atrump Lathes

Manufacturer: Atrump
Model:
KL3060
Capacity: 30" x 59"
Stock: #SMKL3060
Category: Lathes
Subcategory: CNC
Condition: New Machinery
Overall Capacity: 30" x 59"
.
Swing Over Bed: 30"
Center Height to Bed: 15"
Center Height to Top Cross Slide: 9.5"
Swing Over Cross Slide: 19.5"
Distance Between Centers: 59"
Width of Bed: 17.5"
.
Headstock
Spindle Nose: A2-11
Spindle Bore: 4" Diameter
Spindle Speeds: High 1500 - 331 rpm
  Medium 330 - 93 rpm
  Low 92 - 24 rpm
Taper in Spindle: MT #6
.
Saddle
Longitudinal Travel: 59"
Cross Slide Travel: 17.5"
Size of Tool Holder: Boring Tool: 1.57" Diameter
  O.D./Facing Tool: 0.98" Diameter
Ball Screw (Diameter x Pitch): X Axis: 0.98" x 0.196"
  Z Axis: 1.96" x 0.39"
.
Tailstock
Quill Diameter: 4"
Quill Travel: 8.5"
Quill Taper: MT #5
.
Motor
Z Axis Drive Motor: 2 kW AC
X Axis Drive Motor: 1 kW AC
Coolant Pump Motor: 1/4 H.P.
.
X,Z Axes Feed
X Axis Rapid Travel: 240 ipm
Z Axis Rapid Travel: 240 ipm
.
Warranty: One Year Limited Warranty
Horsepower: 20 H.P.
Voltage
Dimensions (L x W x H): 140" x 77" x 70"
Weight: 9900 lbs
Register to Discount
Starting At $76,975
Finance As Low As
$1,575.68 Per Mo.*
more pictures
Compare

30" x 118" Brand New Atrump Heavy Duty CNC Lathe, Mdl. KL30120, Centroid T400i Control with 15" Color VGA LCD Screen, User Friendly Controls, X and Z Axes Ball Screw, Coolant System, Automatic Gear Shifting in 3 Gear Range, Auto Lube for X-Z Slide Ways & Ball Screw, 20 H.P. Main Motor with Inverter, Rear Splash Guard, Two Sliding Doors on Front (Semi-Enclosure Guard for Center Distance over 120"), Electric Cabinet to Suit CNC Control, Mounting Block for Tool Post, Halogen Work Light, Encoder for Spindle Speed, Electronic Hand Wheel for X-Z Axes, X & Z Dedicated Jog Buttons, Spindle & Brake Functions, PC Based, PC Style Sealed Full Feature Keyboard, Digital AC Servo Drives & Motors, 120 GB Solid State Hard Drive, USB 2.0 Port, RS-232, Mouse & Parallel Ports, PC Based Technology, Updateable & High Speed Block Throughout, Conversational Programming, Tool Path Graphics, Turning Cycles, Grooving Cycles, Drilling Cycles etc..., G-Codes & Full M-Function Control, Part Program, Storage & Editing, Axis Control, Feed Function, Utilities, Tool Box & Tools, #SMKL3