Popular Search
      Webcam
 Fabricating | Chipmaking
Last Updated: Thu, Mar 30, 2017
Search By:      MANUFACTURER   |    CATEGORY   |    MODEL
Sterling Machinery Exchange
Sterling Machinery Exchange
Sterling Machinery Exchange  Sterling Machinery Exchange  Sterling Machinery Exchange  Sterling Machinery Exchange  Sterling Machinery Exchange Sterling Machinery Exchange

Machinery and Equipment For Sale
Acra (124)
more pictures
Compare

4' x 11" Brand New Acra Radial Arm Drill, Mdl. FD1280, Coolant System, Box Table, Tool Box, Made In Tiawan, #SMFRD1280

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
FD1280
Capacity: 4' x 11"
Stock: #SMFRD1280
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 11"
Arm Length: 55-1/2"
Drilling Capacity In Steel: 2"
Drilling Capacity In Cast Iron: 2-1/8"
Tapping Capacity In Steel: 1"
Tapping Capacity In Cast Iron: 1.25"
Spindle Taper: #4 MT
Spindle Diameter: 3-1/16"
Spindle Stroke: 9-7/8"
Spindle Speeds: 44- 1500 RPM
Horizontal Travel Of Head: 36"
Spindle Feeds: 0.02~0.006 IPR
Voltage: 220V AC/3 PH
Horsepower: 3 H.P.
Dimensions (L x W x H): 90" X 39" X 102"
Weight: 4,730 Lbs.
Register to Discount
$20,000
Finance As Low As
$409.40 Per Mo.*
more pictures
Compare

60 Amp Brand New Acra Electric Discharge Machine, Mdl. EDM1216, Fire Protection Device, Dielectric Level Control Device, Sleep Device, Memory Device Even Power Failure, The Coordinate Value, Machining Condition And Machining Time Could Be Indicated Clearly In the Monitor, 500 Blocks Of Program Sequence Make The Rough Edming-Middle Edming-Fine Finishing Could Be Accomplished Simply By One Step, 2 Steps Servo Speed System Specially For Deep Hole Machining Assure High Precision Performance, Automatic Monitor Protection Device, Automatic Anti-Arc Device, Work Light, Work Head, Clamping Set, Coolant System, Filters, Tool Box, #SMEDM1216

>> View Complete Specs

Acra Edm Machines

Manufacturer: Acra
Model:
EDM1216
Capacity: 60 Amp
Stock: #SMEDM1216
Category: Edm Machines
Condition: New Machinery
Work Tank Capacity: 44" x 24" x 16"
Work Table Dimensions: 28" x 18"
Longitudinal Travel: 16"
Cross Travel: 12"
Spindle Travel: 8"
Headstock Travel: 10"
Amps: 60
Input Rating: 7 KVA
Maximum Processing Speed: 6 G/Min
Electrode Wear Ratio: 0.25%
Maximum Programming Capacity: 500 Blocks
Minimum D.R.O. Resolution: 0.0002"
Maximum D.R.O. Distance: 99.9999"
Fluid Tank Capacity: 380L
Horsepower
Voltage: 220V AC ~ 3 Phase
Dimensions (W x D x H): 87" x 70" x 98"
Weight: 5,250 Lbs.
Register to Discount
Starting At $24,500
Finance As Low As
$501.52 Per Mo.*
more pictures

videos
Compare

10" x 15" Brand New Acra Variable Speed "SWIVEL HEAD MITER CUTTING" Horizontal "Heavy Duty" Bandsaw, Mdl. FHBS-250VS, Large Handwheel And Build-In Gauge For Easy Blade Tensioning, Built In Coolant, And Coolant Is Distributed Through The Blade Guides, Swivel Head Miter Cutting, #SMFHBS250VS

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
FHBS-250VS
Capacity: 10" x 15"
Stock: #SMFHBS250VS
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New Machinery
Operation:: Manual
Type: Swivel Head
Capacity (Round) 90°: 10"
Capacity (Round) 45°: 8 1/2"
Capacity (Rect.) 90°: 10" x 15"
Capacity (Rect.) 45°: 10" x 9 1/2"
Throat Depth: 10 1/2"
Swivel Base: 60~90°
Bed Height: 23 1/2"
Blade Speed: 82~259 FPM
Blade Size: 1" x 0.032" x 130"
Main Motor: 2 HP
Voltage: 220v/440v, 3 Phase
Dimensions (L x W x H): 68" x 30" x 44 1/2"
Weight: 1,200 Lbs.
Register to Discount
$5,650
Finance As Low As
$115.66 Per Mo.*
more pictures
Compare

14" Brand New Acra Manual (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. FHC 370T, Coolant, Adjustable Stop, Rotary Brush, Safety Guard, Tool Vise, #SMFHC370T

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
FHC 370T
Capacity: 14"
Stock: #SMFHC370T
Category: Saws
Subcategory: Cold & Carbide (Chop Saw)
Condition: New Machinery
Material Type:: Ferrous
Blade Size: 12"~14 1/2"
Head Swivel: L45° 90° R45°
Clamping Vise: Single
Coolant Pump Motor: 40 W
Feed Type:: Manual
Blade RPM: 35~105 RPM
Voltage: 220V AC / 3 PH
Main Drive Motor: 3 HP
Dimensions: 32" x 35" x 63"
Weight: 675 Lbs.
Register to Discount
$5,650
Finance As Low As
$115.66 Per Mo.*
more pictures
Compare

12 Ga. x 4' Brand New Acra Floor Type Hand Brake, Mdl. FK-S4812, Stand, #SMFKS4812

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FK-S4812
Capacity: 12 Ga. x 4'
Stock: #SMFKS4812
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Bending Length: 48"
Cap. Mild Steel: 12 GA
Cap. Stainless Steel: 16 GA
Net Weight: 1,384 LBS
Register to Discount
$3,950
Finance As Low As
$80.86 Per Mo.*
more pictures
Compare

12 Ga. x 8' Brand New Acra Floor Type Hand Brake, Mdl. FK-S9612, Stand, #SMFKS9612

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FK-S9612
Capacity: 12 Ga. x 8'
Stock: #SMFKS9612
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Bending Length: 96"
Cap. Mild Steel: 12 GA
Cap. Stainless Steel: 16 GA
Net Weight: 3,550 LBS
Register to Discount
$5,750
Finance As Low As
$117.70 Per Mo.*
more pictures
Compare

16 Ga. x 8' Brand New Acra Floor Type Hand Brake, Mdl. FK-S9616, #SMFKS9616

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FK-S9616
Capacity: 16 Ga. x 8'
Stock: #SMFKS9616
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Bending Length: 96"
Cap. Mild Steel: 16 GA
Cap. Stainless Steel: 20 GA
Net Weight: 2,440 LBS
Register to Discount
$5,050
Finance As Low As
$103.37 Per Mo.*
more pictures
Compare

18 Ga. x 8' New Acra Manual Hand Brake, Mdl. FK-S9618, #SMFK-S9618

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FK-S9618
Capacity: 18 Ga. x 8'
Stock: #SMFK-S9618
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Bending Length: 96"
Cap. Mild Steel: 18 GA
Cap. Stainless Steel: 22 GA
Net Weight: 1,670 LBS
Register to Discount
$4,200
Finance As Low As
$85.97 Per Mo.*
more pictures
Compare

14 Ga. x 10' Brand New Acra Floor Type Hand Brake, Mdl. FK-S12014, Stand, #SMFKS12014

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FK-S12014
Capacity: 14 Ga. x 10'
Stock: #SMFKS12014
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Bending Length: 120"
Cap. Mild Steel: 14 GA
Cap. Stainless Steel: 18 GA
Net Weight: 3,607 LBS
Register to Discount
$6,950
Finance As Low As
$142.27 Per Mo.*
more pictures
Compare

16 Ga. x 10' New Acra Manual Hand Brake, Mdl. FK-S12016, #SMFKS12016

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FK-S12016
Capacity: 16 Ga. x 10'
Stock: #SMFKS12016
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Bending Length: 120"
Cap. Mild Steel: 16 GA.
Cap. Stainless Steel: 20 GA.
Net Weight: 3,232 LBS
Register to Discount
$6,450
Finance As Low As
$132.03 Per Mo.*
more pictures
Compare

16 Ga. x 4' Brand New Acra Foot Shear, Mdl. FS-F5216, Rear Operated Manual Backgauge, 2 Front Supports, Front Gauge- For Smaller Pieces of Material, Made In Taiwan, #SMFSF5216

>> View Complete Specs

Acra Shears

Manufacturer: Acra
Model:
FS-F5216
Capacity: 16 Ga. x 4'
Stock: #SMFSF5216
Category: Shears
Subcategory: Foot (Manual)
Condition: New Machinery
Cutting Length: 52"
Capacity Mild Steel: 16 GA
Back Gauge Range: 25 1/2"
Front Gauge Range: 28"
Dimensions (L x W x H): 65" x 30" x 50"
Weight: 1,188 LBS
Register to Discount
$2,400
Finance As Low As
$49.13 Per Mo.*
more pictures
Compare

20" Brand New Acra Disc Sander, Mdl. DS-20, Stand, Mitering Table, #SMDS20

>> View Complete Specs

Acra Grinders, Sanders

Manufacturer: Acra
Model:
DS-20
Capacity: 20"
Stock: #SMDS20
Category: Grinders, Sanders
Subcategory: Disc
Condition: New Machinery
Disc Size: 20"
Disc RPM: 1720 RPM
Table Tilt: 45º / 30º
Main Motor: 2 HP
Voltage: 220V AC / 3 PH
Dimensions (L x D x H): 28" x 27" x 50"
Weight: 397 LBS
Register to Discount
$1,750
more pictures

videos
Compare

13"/18" x 40" Brand New Acra Gap Bed Engine Lathe (Geared Head), Mdl. FI-1340 GSM, Hardened And Ground Bed Way, Heavy Duty Geared Head; Hardened And Ground Gears, Foot Brake Giving Rapid Braking, Made In China, 3 Jaw Chuck, 4 Jaw Chuck, Steady Rest, Follow Rest, Face Plate, Coolant System, Work Light, (SINGLE PHASE) #SMFI1340GSM

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
FI-1340 GSM
Capacity: 13"/18" x 40"
Stock: #SMFI1340GSM
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Swing Over Bed: 13"
Swing Over Cross Side: 7 3/4
Swing In Gap: 17 3/4
Distance Between Centers: 40"
Bed Width: 7 1/8"
Spindle Nose: D1-4
Spindle Bore: 1 1/2"
Spindle Taper: #5 MT
Spindle Speeds: 8 Steps 70 ~ 2,000 RPM
Tailstock Quill Travel: 3.3
Cross Slide Travel: 6.29
Compound Slide Travel: 2.95"
Lead Screw: Metric-22mm 3mm Pitch/Imperial
Longitudinal Feeds: 36 Steps 0.079~1.291 mm/rev
Cross Feeds: 36 Steps 0.017~0.276 mm/rev
Thread Cutting Capacity (Inch): 4-60 Pitch
Quill Diameter: 1 1/4"
Tailstock Quill Taper: #3 MT
Spindle Drive Motor: 2 HP
Voltage: 110V / 220V AC / 1PH
Motor: 1 Phase
Horsepower:: 2
Dimensions (W x D x H): 74" x 30" x 44"
Weight: 1146 LBS Net
Weight: 1367 LBS Shipping
Register to Discount
Starting At $4,750
Finance As Low As
$97.23 Per Mo.*
more pictures

videos
Compare

16 Ga. x 50" Brand New Acra Powered Slip Roll Machine, Mdl. FR-P5016, Hand Pendant Control, #SMFRP5016

>> View Complete Specs

Acra Rolls

Manufacturer: Acra
Model:
FR-P5016
Capacity: 16 Ga. x 50"
Stock: #SMFRP5016
Category: Rolls
Subcategory: Plate Bending (Slip Roll, Pyramid, Initial Pinch, Double Pinch)
Condition: New Machinery
Capacity Mild (Steel): 16 Ga.
Max. Form Width: 50"
Roll Diameter: 3"
Type:: Slip Roll
Operation:: Hydraulic
Motor: 220V 3PH
Weight: 900 Lbs.
Register to Discount
$3,250
Finance As Low As
$66.53 Per Mo.*
more pictures

videos
Compare

7" x 12" Brand New Acra Horizontal/Vertical Band Saw, Mdl. FHBS-712, Coolant System, Work Length Stop, Casters, Automatic Shut-Off, Rapid Approach Vise, Blade Chip Brush, Safe Guards & Vertical Saw Table, #SMFHBS712

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
FHBS-712
Capacity: 7" x 12"
Stock: #SMFHBS712
Category: Saws
Subcategory: Vertical Bandsaw, Horizontal Bandsaw
Condition: New Machinery
Operation:: Manual
Capacity:
Round: 7"
Rectangle: 7" x 12"
Blade Size: 3/4" x 0.0032" x 95"
Blade Speed (4): 86, 132, 178, 260 FPM
Horsepower: 1 H.P.
Voltage: 110v/220v Single Phase
Dimensions (L x W x H): 50" x 18" x 39"
Weight: 300 LBS
Register to Discount
$1,350
more pictures
Compare

12" x 54" New Acra Heavy Duty Vertical Milling Machine, Mdl. AM3VVV, Hardened & Ground Table & Ways, Double Wall Construction, Turcite On The Table X & Y Axis, Quill Heat Treat Hardened & Chromed, #SMAM3VVV

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM3VVV
Capacity: 12" x 54"
Stock: #SMAM3VVV
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 12" x 54"
Speed Selector: Variable Speed
Spindle Speed: 65 - 4,200 RPM
Spindle: R-8 or #30 Taper
Axis Travel X, Y And X: 39-1/2" x 16" x 16"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x L x H): 6' x 6' x 6'
Weight: 2,900 Lbs.
Register to Discount
Starting At $8,000
Finance As Low As
$163.76 Per Mo.*
more pictures

videos
Compare

14" Brand New Acra Vertical Bandsaw (SINGLE PHASE), Mdl. KB-36, Saw Blade Welder, Grinder, Blade Shear, Worklight, Made In Taiwan, #SMKB36

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
KB-36
Capacity: 14"
Stock: #SMKB36
Category: Saws
Subcategory: Vertical Bandsaw
Condition: New Machinery
Throat: 14"
Type:: Ferrous/Non-Ferrous
Operation:: Manual
Max. Work Height: 9-1/16"
Table Size: 19-1/2" x 15-1/4"
Blade Length: 113"
Blade Width: 1/8 - 5/8"
Blade Speeds: 65 - 295 FPM
Horsepower: 1
Voltage: 220V AC/ 1PH
Dimensions: 50" x 55" x 85"
Weight: 551 Lbs.
Register to Discount
$3,100
Finance As Low As
$63.46 Per Mo.*
more pictures

videos
Compare

20" Brand New Acra Vertical Metal Cutting Bandsaw, Mdl. KV-50, Saw Blade Welder, Grinder, Blade Shear, Worklight, Made In Taiwan, #SMKV50

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
KV-50
Capacity: 20"
Stock: #SMKV50
Category: Saws
Subcategory: Vertical Bandsaw
Condition: New Machinery
Throat: 20-1/2"
Operation:: Manual
Type:: Ferrous/Non-Ferrous
Max. Work Height: 12-3/8"
Blade Length: 151-1/8"
Table Size: 23-1/2" x 19-1/2"
Blade Width: 1/8" - 5/8"
Blade Speeds Low: 65 - 265 FPM
Blade Speeds High: 400 - 1600 FPM
Horsepower: 2 H.P.
Voltage: 220/440V, AC ~ 3 Phase
Dimensions (W x L x H): 40" x 50" x 81"
Weight: 1,586 Lbs.
Register to Discount
$5,300
Finance As Low As
$108.49 Per Mo.*
more pictures
Compare

39" Brand New Acra Vertical Bandsaw, Mdl. KV-100, Saw Blade Welder, Grinder, Blade Shear, Worklight, Made In Taiwan, #SMKV100

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
KV-100
Capacity: 39"
Stock: #SMKV100
Category: Saws
Subcategory: Vertical Bandsaw
Condition: New Machinery
Throat: 39-3/8"
Operation:: Manual
Type:: Ferrous/Non-Ferrous
Max. Work Height: 13-1/2"
Table Size: 17-3/4" x 19-1/2"
  23-1/2" x 19-1/2"
Blade Length: 178-5/8"
Blade Width: 1/8" - 5/8"
Blade Speeds Low: 65 - 265 FPM
Blade Speeds High: 400 - 1600 FPM
Voltage: 220/440V ~ 3 Phase
Horsepower: 2 H.P.
Dimensions: 50" x 55" x 85"
Weight: 1,963 Lbs.
Register to Discount
$6,400
Finance As Low As
$131.01 Per Mo.*
more pictures
Compare

9" x 48" Brand New Acra Vertical Milling Machine (Variable Speed) "Bridgeport Copy", Mdl. AM2J, This Machine Is A Copy Of A Bridgeport Series 1, Hardened & Ground Table & Ways, One-Shot Lube System, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Made In Taiwan, #SMAM2J

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM2J
Capacity: 9" x 48"
Stock: #SMAM2J
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 9" x 48"
X Axis Travel: 36"
Y & Z Axis Travel: 12", 16"
Quill Travel: 5"
Ram Travel: 12"
T-Slot Number , Size: 3 , 5/8"
Throat Distance (Min/Max): 6.75"/18.75"
Spindle Motor: R-8 or #30
Power Quill Feed: 3/4"
Speed Selector: Variable Speed
Manual Drilling Capacity: 3/4"
Spindle RPM: 65~4,200 RPM
Boring Range: 6"
Quill Diameter: 3 3/8"
Spindle Diameter: 1.875"
Manual Adjust: .003"/.006"
Horsepower: 3 H.P.
Votlage: 220/440V AC/3PH
Voltage: 220/440V AC/3PH
Dimensions (L x W x H): 56" x 57" x 90"
Weight: 2,200 LBS
Register to Discount
Starting At $7,750
Finance As Low As
$158.64 Per Mo.*
more pictures
Compare

14"/20" x 40" Brand New Acra Gear Head Gap Bed Engine Lathe, Mdl. GH 14X40A, 6" 3 Jaw Chuck, 8" 4 Jaw Chuck, Face Plate, Coolant System, Steady/Follow Reat, Micro Bed Stop, 4 Way Tool Holder, Full Lenght Splash Guard, Halogen Work Light, #SMGH1440A

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
GH 14X40A
Capacity: 14"/20" x 40"
Stock: #SMGH1440A
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 17"/20" x 40"
Swing Over Bed: 14"
Distance Between Centers: 40"
Swing Over Cross Slide: 8-5/8"
Swing in Gap: 20"
Spindle Bore: 1-1/2"
Spindle Nose: D1-4
Cross Slide Travel: 7"
Tailstock Quill Travel: 4-3/4"
Spindle Taper: MT #3
Spindle RPM: 45 - 1800
Inch Threads: 4 - 112 TPI
Metric Threads: .45 - 7.5 mm
Feeds
Longitudinal: .0012 - .0294"/rev
Cross: .0003 - .01"/rev
Horsepower: 3 H.P.
Motor: 220V 3 PH
Dimensions (W x L x H): 72" x 31" x 49"
Weight: 2000 Lbs.
Register to Discount
Starting At $6,500
Finance As Low As
$133.06 Per Mo.*
more pictures
Compare

16 Ga. x 4' Brand New Acra Manual Box & Pan Brake, Mdl. FPB-4816, Stand, #SMFPB4816

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FPB-4816
Capacity: 16 Ga. x 4'
Stock: #SMFPB4816
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Capacity: (Mild Steel): 16 Ga.
Max Bending Length: 48"
Max. Depth Of Box: 4"
Maximum Lift Of Beam: 1-1/4"
Weight: 850 Lbs.
Register to Discount
$1,750
more pictures
Compare

13"/19-1/4" x 40" Brand New Acra Precision Engine Lathe, Mdl. 1340SS, 6" 3 Jaw Chuck, 8" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Mico Bed Stop, 4 Way Tool Post, #SM1340SS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1340SS
Capacity: 13"/19-1/4" x 40"
Stock: #SM1340SS
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 13"/19-1/4" x 40"
Swing Over Bed: 13"
Swing Over Cross Slide: 7 5/8"
Swing In Gap: 19 1/4"
Distance Between Centers: 40"
Bed Width: 7 1/2"
Spindle Nose: D1-4
Spindle Bore: 1 1/2"
Taper of Spindle: MT NO.5
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 45-1800 RPM
Cross Slide Travel: 6 1/2"
Compound Slide Travel: 3 3/8"
Inch Threads: 4-56 TPI
Metric Threads: 0.4 - 7 mm
Longitudinal Feeds: 0.0033 - 0.0736"/rev
Cross Feeds: 0.0011 - 0.0245"/rev
Quill Diameter: 1 9/16"
Quill Travel: 4 3/8"
Quill Taper: MT NO.3
Spindle Drive Motor: 3 HP
Voltage: 220v/440v, 3 Phase
Net Weight: 1,540 LBS
Shipping Weight: 2,200 LBS
Dimensions (L x W x H): 72" x 29" x 47"
Register to Discount
Starting At $9,500
Finance As Low As
$194.47 Per Mo.*
more pictures
Compare

13"/18" x 40" Brand New Acra Precision Gap Bed Engine Lathe, Mdl. 1340BV, 6" 3 Jaw Chuck, 8" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Mico Bed Stop, 4 Way Tool Post, Made In Taiwan, #SM1340BV

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1340BV
Capacity: 13"/18" x 40"
Stock: #SM1340BV
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 13"/ 18 1/2" x 40"
Swing Over Bed: 13"
Swing Over Cross Slide: 8 1/4"
Swing In Gap: 18 1/2"
Distance Between Centers: 40"
Bed Width: 7 1/2"
Spindle Nose: D1-4
Spindle Bore: 1 9/16"
Taper of Spindle: MT NO. 3
Spindle Speeds - Steps: Variable
Spindle Speeds - Range: 40 - 2000 RPM
Cross Slide Travel: 6 3/4''
Compound Slide Travel: 3 1/8"
Inch Threads: 2-25 TPI
Metric Threads: 0.5 - 12mm
Longitudinal Feeds: 0.0016 - 0.046"/rev
Cross Feeds: 0.0005 - 0.015"/rev
Quill Diameter: 1 9/16"
Quill Travel: 4 3/8"
Quill Taper: MT NO.3
Spindle Drive Motor: 3 HP
Voltage: 220v/440v, 3 Phase
Net Weight: 1,320 LBS
Shipping Weight: 2000 LBS
Dimensions (L x W x H): 72" x 29" x 47"
Register to Discount
Starting At $9,950
Finance As Low As
$203.68 Per Mo.*
more pictures
Compare

14 3/16"/ 21" x 40" Brand New Acra Precision Engine Lathe 8 Speed, Mdl. 1440TE, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Halogen Work Light, 4 Way Tool Holder, #SM1440TE

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1440TE
Capacity: 14 3/16"/ 21" x 40"
Stock: #SM1440TE
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 14 3/16"/ 21" x 40"
Swing Over Bed: 14 3/16"
Swign Over Cross Slide: 8 3/8"
Swing In Gap: 21"
Distance Between Centers: 40"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper of Spindle: MT NO.6
Spindle Speeds - Steps: 8
Spindle Speeds - Range: 70-1800 RPM
Cross SlideTravel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220v/440v, 3 Phase
Net Weight: 3,300 LBS
Shipping Weight: 3,600 LBS
Dimensions (LxWxH): 82" x 32" x 48"
Register to Discount
$13,750
Finance As Low As
$281.46 Per Mo.*
more pictures
Compare

14 3/16" / 21" x 60 Brand New Acra Precision Engine Lathe 8 Speed, Mdl. 1460TE, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Halogen Work Light, 4 Way Tool Holder, #SM1460TE

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1460TE
Capacity: 14 3/16" / 21" x 60
Stock: #SM1460TE
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 14 3/16"/ 21" x 40"
Swing Over Bed: 14 3/16"
Swign Over Cross Slide: 8 3/8"
Swing In Gap: 21"
Distance Between Centers: 40"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper Of Spindle: MT NO.6
Spindle Speeds - Steps: 8
Spindle Speeds - Range: 70-1800 RPM
Cross SlideTravel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220v/440v, 3 Phase
Net Weight: 3,500 LBS
Shipping Weight: 3,800 LBS
Dimensions (LxWxH): 102" x 32" x 48"
Register to Discount
$15,000
Finance As Low As
$307.05 Per Mo.*
more pictures
Compare

16 3/16"/ 23" x 40" Brand New Acra Precision Engine Lathe 12 Speed, Mdl. 1640TE, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Halogen Work Light, 4 Way Tool Holder, #SM1640TE

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1640TE
Capacity: 16 3/16"/ 23" x 40"
Stock: #SM1640TE
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 16 3/16"/ 23" x 40"
Swing Over Bed: 16 3/16"
Swign Over Cross Slide: 10 3/8"
Swing In Gap: 23"
Distance Between Centers: 40"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper of Spindle: MT NO.6
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 36-1800 RPM
Cross SlideTravel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220v/440v, 3 Phase
Net Weight: 3,400 LBS
Shipping Weight: 3,700 LBS
Dimensions (LxWxH): 102" x 32" x 50"
Register to Discount
$15,850
Finance As Low As
$324.45 Per Mo.*
more pictures
Compare

16 3/16" / 23" x 60" Brand New Acra Precision Engine Lathe 12 Speed, Mdl. 1660TE, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Halogen Work Light, 4 Way Tool Holder, #SM1660TE

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1660TE
Capacity: 16 3/16" / 23" x 60"
Stock: #SM1660TE
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 16 3/16" / 23" x 60"
Swing Over Bed: 16 3/16"
Swign Over Cross Slide: 10 3/8"
Swing In Gap: 23"
Distance Between Centers: 60"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper of Spindle: MT NO.6
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 36-1800 RPM
Cross SlideTravel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220v/440v, 3 Phase
Dimensions (LxWxH): 122" x 32" x 50"
Net Weight: 3,600 LBS
Shipping Weight: 3,900 lbs
Register to Discount
$17,150
Finance As Low As
$351.06 Per Mo.*
more pictures
Compare

14 3/16"/ 21" x 60" Brand New Acra Variable Speed Lathe, Mdl. 14X60 TVS, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Yaskawa Inverter, 4 Way Tool Holder, Halogen Work Light, #SM1460TVS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1460TVS
Capacity: 14 3/16"/ 21" x 60"
Stock: #SM1460TVS
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 14 3/16" / 21" x 60"
Swing Over Bed: 14 3/16"
Swing Over Cross Slide: 8 3/8"
Swing In Gap: 21"
Distance Between Centers: 60"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper of Spindle: MT NO.6
Spindle Speeds - Steps: 2
Spindle Speeds - Range: 20 - 2500 RPM
Cross Slide Travel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220V AC / 3 PH / 1 PH
Net Weight: 3,640 LBS
Shipping Weight: 3,970 LBS
Dimensions (LxWxH): 109" x 32" x 48"
Register to Discount
$18,500
Finance As Low As
$378.70 Per Mo.*
more pictures
Compare

14 3/16"/ 21" x 40" Brand New Acra Variable Speed Lathe, Mdl. SM1440TVS, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Yaskawa Inverter, 4 Way Tool Holder, Halogen Work Light, #SM1440TVS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1440TVS
Capacity: 14 3/16"/ 21" x 40"
Stock: #SM1440TVS
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 14 3/16"/ 21" x 40
Swing Over Bed: 14 3/16"
Swing Over Cross Slide: 8 3/8"
Swing In Gap: 21"
Distance Between Centers: 40"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper of Spindle: MT NO.6
Spindle Speeds - Steps: 2
Spindle Speeds - Range: 20 - 2500 RPM
Cross Slide Travel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220V AC / 3 PH / 1 PH
Net Weight: 3,200 LBS
Shipping Weight: 3,640 LBS
Dimensions (LxWxH): 89" x 32" x 48"
Register to Discount
$17,500
Finance As Low As
$358.23 Per Mo.*
more pictures
Compare

16 3/16" / 30" x 40" Brand New Acra Variable Speed Lathe, Mdl. SM1640TVS, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Yaskawa Inverter, 4 Way Tool Holder, Halogen Work Light, #SM1640TVS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1640TVS
Capacity: 16 3/16" / 30" x 40"
Stock: #SM1640TVS
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 16 3/16" / 30" x 40"
Swing Over Bed: 16 3/16"
Swing Over Cross Slide: 10 3/8"
Swing In Gap: 30"
Distance Between Centers: 40"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper of Spindle: MT NO.6
Spindle Speeds - Steps: 2
Spindle Speeds - Range: 20 - 2500 RPM
Cross Slide Travel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220V AC / 3 PH / 1 PH
Net Weight: 3,530 LBS
Shipping Weight: 3,970 LBS
Dimensions (LxWxH): 109" x 32" x 50"
Register to Discount
$18,250
Finance As Low As
$373.58 Per Mo.*
more pictures
Compare

16-3/16" / 30" x 60" Brand New Acra Variable Speed Lathe, Mdl. SM1660TVS, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Yaskawa Inverter, 4 Way Tool Holder, Halogen Work Light, #SM1660TVS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1660TVS
Capacity: 16-3/16" / 30" x 60"
Stock: #SM1660TVS
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 16-3/16" / 30" x 60"
Swing Over Bed: 16 3/16"
Swing Over Cross Slide: 10 3/8"
Swing In Gap: 30"
Distance Between Centers: 40"
Bed Width: 10 1/4"
Spindle Nose: D1-6
Spindle Bore: 2 1/16"
Taper of Spindle: MT NO.6
Spindle Speeds - Steps: 2
Spindle Speeds - Range: 20 - 2500 RPM
Cross Slide Travel: 8 11/16"
Compound Slide Travel: 5 1/2"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.034"/rev
Quill Diameter: 2"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 5 HP
Voltage: 220V AC / 3 PH / 1 PH
Net Weight: 3,530 LBS
Shipping Weight: 3,970 LBS
Dimensions (LxWxH): 109" x 32" x 50"
Register to Discount
$19,250
Finance As Low As
$394.05 Per Mo.*
more pictures
Compare

15 1/4" / 24" x 50" , Mdl. 1550C, Brand New Acra 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Halogen Work Light, 4 Way Tool Holder, #SM1550C

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1550C
Capacity: 15 1/4" / 24" x 50"
Stock: #SM1550C
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 15 1/4" / 24" x 50"
Swing Over Bed: 15 1/4"
Swign Over Cross Slide: 9 3/8"
Swing In Gap: 24"
Distance Between Centers: 50"
Bed Width: 11"
Spindle Nose: D1-6
Spindle Bore: 2 3/16"
Taper Of Spindle: MT NO. 4
Spindle Speeds - Steps: 16
Spindle Speeds - Range: 25 - 2000 RPM
Cross SlideTravel: 9 1/4"
Compound Slide Travel: 4 3/4"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.002 - 0.067"/rev
Cross Feeds: 0.001 - 0.0371"/rev
Quill Diameter: 2 5/16"
Quill Travel: 5"
Quill Taper: MT NO.4
Spindle Drive Motor: 7 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 3,200 LBS.
Shipping Weight: 3,750 LBS.
Dimensions (LxWxH): 92" x 38" x 50"
Register to Discount
$20,000
Finance As Low As
$409.40 Per Mo.*
more pictures
Compare

20" x 60" Brand New Acra Gap Bed Engine Lathe, Mdl. 2060 BCY, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Chuck Guard, Full Length Splash Guard, Halogen Light, Coolant System, #SM2060BCY

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2060 BCY
Capacity: 20" x 60"
Stock: #SM2060BCY
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 20" x 60"
Swing Over Bed: 20"
Distance Between Centers: 60"
Swing In Gap: 28-7/8"
Swing Over Cross Slide: 12-5/8"
Spindle Mount: D1-8
Hole Thru Spindle: 3-1/4"
Spindle Speeds: 15 - 1500 RPM
Metric: 0.2 - 14mm
Tailstock Quill Taper: #5 MT
Tailstock Quill Travel: 7"
Horsepower: 10 H.P.
Dimensions (L x D x H): 4'x8'x6'
Weight: 4,765 Lbs.
Register to Discount
Starting At $14,000
Finance As Low As
$286.58 Per Mo.*
more pictures
Compare

14" / 20" x 40" Brand New Acra Precision AC Vari Engine Lathe, Mdl. 1440SVS, 6" 3 Jaw Chuck, 8" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, Micro Bed Stop, 4 Way Tool Holder, #SM1440SVS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1440SVS
Capacity: 14" / 20" x 40"
Stock: #SM1440SVS
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 14"/20"x40"
Swing Over Bed: 14"
Swing Over Cross Slide: 8 5/8"
Swing in Gap: 20"
Distance Between Centers: 40"
Bed Width: 8 1/2"
Spindle Nose: D1-4
Spindle Bore: 1 1/2"
Taper of Spindle: MT NO.5
Spindle Speeds - Steps: Variable Speed 2 Step
Spindle Speeds - Range: 30 - 2500 RPM
Cross SlideTravel: 6 1/2"
Compound Slide Travel: 4"
Inch Threads: 1-56 TPI
Metric Threads: 0.45 - 7.5 mm
Longitudinal Feeds: 0.0011 - 0.0543"/rev
Cross Feeds: 0.0003 - 0.0181"/rev
Quill Diameter: 1 9/16"
Quill Travel: 4 3/4"
Quill Taper: MT NO.3
Spindle Drive Motor: 5 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 1,635 LBS
Shipping Weight: 2,000 LBS
Dimensions (LxWxH): 71" x 32" x 51"
Register to Discount
Starting At $12,500
Finance As Low As
$255.88 Per Mo.*
more pictures
Compare

17" / 24" x 43" , Mdl. SM1743GFEL, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, #SM1743GFEL

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1743GFEL
Capacity: 17" / 24" x 43"
Stock: #SM1743GFEL
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 17" / 24" x 43"
Swing Over Bed: 17"
Swing Over Cross Slide: 10 3/4"
Swing In Gap: 24"
Distance Between Centers: 43"
Bed Width: 12"
Spindle Nose: D1-6
Spindle Bore: 2 1/4"
Taper of Spindle: MT NO.5
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 35 - 2000 RPM
Cross SlideTravel: 10 1/2"
Compound Slide Travel: 4 1/4"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0012 - 0.034"/rev
Cross Feeds: 0.0006 - 0.017"/rev
Quill Diameter: 2 3/8"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 7 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Dimensions (LxWxH): 90" x 38" x 54"
Net Weight: 3,450 LBS
Shipping Weight: 3,740 LBS
Register to Discount
$16,250
Finance As Low As
$332.64 Per Mo.*
more pictures
Compare

17" / 24" x 67" Brand New Acra Precision Engine Lathe, Mdl. SM1767GFEL, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, #SM1767GFEL

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1767GFEL
Capacity: 17" / 24" x 67"
Stock: #SM1767GFEL
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 17" / 24" x 67"
Swing Over Bed: 17"
Swing Over Cross Slide: 10 3/4"
Swing In Gap: 24"
Distance Between Centers: 67"
Bed Width: 12"
Spindle Nose: D1-6
Spindle Bore: 2 1/4"
Taper of Spindle: MT NO.5
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 35 - 2000 RPM
Cross SlideTravel: 10 1/2"
Compound Slide Travel: 4 1/4"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0012 - 0.034"/rev
Cross Feeds: 0.0006 - 0.017"/rev
Quill Diameter: 2 3/8"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 7 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 3,750 LBS
Shipping Weight: 4,180 LBS
Dimensions (LxWxH): 90" x 38" x 54"
Register to Discount
$18,000
Finance As Low As
$368.46 Per Mo.*
more pictures
Compare

18"/25" x 40" Brand New Acra SC Precision Engine Lathe, Mdl. SM1840SC, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, #SM1840SC

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1840SC
Capacity: 18"/25" x 40"
Stock: #SM1840SC
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 18 1/8" / 25 5/8" x 40"
Swing Over Bed: 18 1/8"
Swing Over Cross Slide: 12 1/8"
Swing In Gap: 25 5/8"
Distance Between Centers: 40"
Bed Width: 12"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 30 - 1500 RPM
Cross SlideTravel: 10 11/16"
Compound Slide Travel: 4 3/4"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 7 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 3,740 LBS
Shipping Weight: 4,400 lbs
Dimensions (LxWxH): 95" x 46" x 69"
Register to Discount
$21,000
Finance As Low As
$429.87 Per Mo.*
more pictures
Compare

18"/25" x 60" Brand New Acra SC Precision Engine Lathe, Mdl. SM1860SC, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, #SM1860SC

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1860SC
Capacity: 18"/25" x 60"
Stock: #SM1860SC
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 18 1/8" / 25 5/8" x 60"
Swing Over Bed: 18 1/8"
Swing Over Cross Slide: 12 1/8"
Swing In Gap: 25 5/8"
Distance Between Centers: 40"
Bed Width: 12"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 30 - 1500 RPM
Cross SlideTravel: 10 11/16"
Compound Slide Travel: 4 3/4"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 7 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 4,070 LBS
Shipping Weight: 4,730 LBS
Dimensions (LxWxH): 95/114" x 46" x 69"
Register to Discount
$22,500
Finance As Low As
$460.58 Per Mo.*
more pictures
Compare

21"/28" x 40" Brand New Acra SC Precision Engine Lathe, Mdl. SM2140SC, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, #SM2140SC

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2140SC
Capacity: 21"/28" x 40"
Stock: #SM2140SC
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 21" / 28 3/4" x 40"
Swing Over Bed: 21"
Swing Over Cross Slide: 15 1/4"
Swing In Gap: 28 3/4"
Distance Between Centers: 40"
Bed Width: 12"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 30 - 1500 RPM
Cross SlideTravel: 10 11/16"
Compound Slide Travel: 4 3/4"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 10 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 3,850 LBS
Shipping Weight: 4, 510 LBS
Dimensions (LxWxH): 95/114" x 46" x 69"
Register to Discount
$22,000
Finance As Low As
$450.34 Per Mo.*
more pictures
Compare

21"/28" x 60" Brand New Acra SC Precision Engine Lathe, Mdl. SM2160SC, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, #SM2160SC

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2160SC
Capacity: 21"/28" x 60"
Stock: #SM2160SC
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 21" / 28 3/4" x 60"
Swing Over Bed: 21"
Swing Over Cross Slide: 15 1/4"
Swing In Gap: 28 3/4"
Distance Between Centers: 60"
Bed Width: 12"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 30 - 1500 RPM
Cross SlideTravel: 10 11/16"
Compound Slide Travel: 4 3/4"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6"
Quill Taper: MT NO.4
Spindle Drive Motor: 10 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 4,180 LBS
Shipping Weight: 4,840 LBS
Dimensions (LxWxH): 95/114" x 46" x 69"
Register to Discount
$23,500
Finance As Low As
$481.05 Per Mo.*
more pictures
Compare

18"/28" x 60" Brand New Acra Precision Engine Lathe, Mdl. 1860C, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Micro Bed Stop, #SM1860C

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1860C
Capacity: 18"/28" x 60"
Stock: #SM1860C
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 18" / 28" x 60"
Swing Over Bed: 18"
Swing Over Cross Slide: 11"
Swing In Gap: 28"
Distance Between Centers: 60"
Bed Width: 13 9/16"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 16
Spindle Speeds - Range: 20 - 1600 RPM
Cross SlideTravel: 11"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6 1/2"
Quill Taper: MT NO.5
Spindle Drive Motor: 12 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 5,200 LBS
Shipping Weight: 6,100 LBS
Dimensions (LxWxH): 110" x 48" x 54"
Register to Discount
$27,500
Finance As Low As
$562.93 Per Mo.*
more pictures
Compare

18"/28" x 80" Brand New Acra Precision Engine Lathe, Mdl. 1880C, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Micro Bed Stop, #SM1880C

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1880C
Capacity: 18"/28" x 80"
Stock: #SM1880C
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 18" / 28" x 80"
Swing Over Bed: 18"
Swing Over Cross Slide: 11"
Swing In Gap: 28"
Distance Between Centers: 80"
Bed Width: 13 9/16"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 16
Spindle Speeds - Range: 20 - 1600 RPM
Cross SlideTravel: 11"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6 1/2"
Quill Taper: MT NO.5
Spindle Drive Motor: 12 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 6,000 LBS
Shipping Weight: 6,820 LBS
Dimensions (LxWxH): 130" x 48" x 54"
Register to Discount
$29,000
Finance As Low As
$593.63 Per Mo.*
more pictures
Compare

18"/28" x 120" Brand New Acra Precision Engine Lathe, Mdl. 18120C, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Micro Bed Stop, #SM18120C

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
18120C
Capacity: 18"/28" x 120"
Stock: #SM18120C
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 18" / 28" x 120"
Swing Over Bed: 18"
Swing Over Cross Slide: 11"
Swing In Gap: 28"
Distance Between Centers: 120"
Bed Width: 13 9/16"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 16
Spindle Speeds - Range: 20 - 1600 RPM
Cross SlideTravel: 11"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6 1/2"
Quill Taper: MT NO.5
Spindle Drive Motor: 12 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 8,000 LBS
Shipping Weight: 8,400 LBS
Dimensions (LxWxH): 171" x 48" x 54"
Register to Discount
$34,000
Finance As Low As
$695.98 Per Mo.*
more pictures
Compare

21"/31" x 60" Brand New Acra Precision Engine Lathe, Mdl. 2160C, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Micro Bed Stop, #SM2160C

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2160C
Capacity: 21"/31" x 60"
Stock: #SM2160C
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 21" / 31" x 60"
Swing Over Bed: 21"
Swing Over Cross Slide: 14"
Swing In Gap: 31"
Distance Between Centers: 60"
Bed Width: 13 9/16"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 16
Spindle Speeds - Range: 20 - 1600 RPM
Cross SlideTravel: 11"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6 1/2"
Quill Taper: MT NO.5
Spindle Drive Motor: 12 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 6,500 LBS
Shipping Weight: 6,750 LBS
Dimensions (LxWxH): 110" x 48" x 56"
Register to Discount
$28,250
Finance As Low As
$578.28 Per Mo.*
more pictures
Compare

21" / 31" x 80" Brand New Acra Precision Engine Lathe, Mdl. 2180C, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Micro Bed Stop, #SM2180C

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2180C
Capacity: 21" / 31" x 80"
Stock: #SM2180C
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 21" / 31" x 80"
Swing Over Bed: 21"
Swing Over Cross Slide: 14"
Swing In Gap: 31"
Distance Between Centers: 80"
Bed Width: 13 9/16"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 16
Spindle Speeds - Range: 20 - 1600 RPM
Cross SlideTravel: 11"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6 1/2"
Quill Taper: MT NO.5
Spindle Drive Motor: 12 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 7,000 LBS
Shipping Weight: 7,480 LBS
Dimensions (LxWxH): 130" x 48" x 56"
Register to Discount
$29,950
Finance As Low As
$613.08 Per Mo.*
more pictures
Compare

21" / 31" x 120" Brand New Acra Precision Engine Lathe, Mdl. 21120C, 10" 3 Jaw Chuck, 12" 4 Jaw Chuck, Steady Rest, Follow Rest, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Micro Bed Stop, #SM21120C

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
21120C
Capacity: 21" / 31" x 120"
Stock: #SM21120C
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 21" / 31" x 120"
Swing Over Bed: 21"
Swing Over Cross Slide: 14"
Swing In Gap: 31"
Distance Between Centers: 120"
Bed Width: 13 9/16"
Spindle Nose: D1-8
Spindle Bore: 3 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 16
Spindle Speeds - Range: 20 - 1600 RPM
Cross SlideTravel: 11"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.0015 - 0.04"/rev
Cross Feeds: 0.00075 - 0.02"/rev
Quill Diameter: 2 5/16"
Quill Travel: 6 1/2"
Quill Taper: MT NO.5
Spindle Drive Motor: 12 1/2 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 10,200 LBS
Shipping Weight: 11,000 LBS
Dimensions (LxWxH): 171" x 48" x 56"
Register to Discount
$35,000
Finance As Low As
$716.45 Per Mo.*
more pictures
Compare

22" / 31 3/8" x 60" Brand New Acra Precision Engine Lathe, Mdl. 2260ACH, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM2260ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2260ACH
Capacity: 22" / 31 3/8" x 60"
Stock: #SM2260ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 22" / 31 3/8" x 60"
Swing Over Bed: 22"
Swing Over Cross Slide: 13 3/8"
Swing In Gap: 31 3/8"
Distance Between Centers: 60"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 6,160 LBS
Shipping Weight: 6,500 LBS
Dimensions (LxWxH): 130" x 50" x 60"
Register to Discount
$28,500
Finance As Low As
$583.40 Per Mo.*
more pictures

videos
Compare

22"/31" x 90" Brand New Acra Precision Engine Lathe, Mdl. 2290ACH, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM2290ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2290ACH
Capacity: 22"/31" x 90"
Stock: #SM2290ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 22" / 31 3/8" x 90"
Swing Over Bed: 22"
Swing Over Cross Slide: 13 3/8"
Swing In Gap: 31 3/8"
Distance Between Centers: 90"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 6,710 LBS
Shipping Weight: 7,000 LBS
Dimensions (LxWxH): 160" x 50" x 60"
Register to Discount
$30,500
Finance As Low As
$624.34 Per Mo.*
more pictures
Compare

22" / 31 3/8" x 120" Brand New Acra Precision Engine Lathe, Mdl. 22120ACH, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM22120ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
22120ACH
Capacity: 22" / 31 3/8" x 120"
Stock: #SM22120ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 22" / 31 3/8" x 120"
Swing Over Bed: 22"
Swing Over Cross Slide: 13 3/8"
Swing In Gap: 31 3/8"
Distance Between Centers: 120"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Dimensions (LxWxH): 190" x 50" x 60"
Net Weight: 7,200 LBS
Shipping Weight: 7,500 LBS
Register to Discount
$34,500
Finance As Low As
$706.22 Per Mo.*
more pictures
Compare

22" / 31 3/8" x 160" Brand New Acra Precision Engine Lathe, Mdl. 22160ACH, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM22160ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
22160ACH
Capacity: 22" / 31 3/8" x 160"
Stock: #SM22160ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 22" / 31 3/8" x 160"
Swing Over Bed: 22"
Swing Over Cross Slide: 13 3/8"
Swing In Gap: 31 3/8"
Distance Between Centers: 90"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 7,770 LBS
Shipping Weight: 8,250 LBS
Dimensions (LxWxH): 190" x 50" x 60"
Register to Discount
$42,000
Finance As Low As
$859.74 Per Mo.*
more pictures
Compare

26" / 35 3/8" x 60" Brand New Acra Precision Engine Lathe, Mdl. 2660ACH, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM2660ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2660ACH
Capacity: 26" / 35 3/8" x 60"
Stock: #SM2660ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 35 5/8" x 60"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 35 3/8"
Distance Between Centers: 60"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 6,360 LBS
Shipping Weight: 6,700 LBS
Dimensions (LxWxH): 130" x 50" x 60"
Lead Screw Pitch: 4TPI/6mm
Register to Discount
$29,500
Finance As Low As
$603.87 Per Mo.*
more pictures
Compare

26"/ 35-3/8" x 90" Brand New Acra Precision Engine Lathe, Mdl. 2690ACH, 15" 3 Jaw Chuck, Full Length Rear Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM2690ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2690ACH
Capacity: 26"/ 35-3/8" x 90"
Stock: #SM2690ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 35 3/8" x 90"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 35 3/8"
Distance Between Centers: 90"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Dimensions (LxWxH): 160" x 50" x 60"
Net Weight: 6,910 LBS
Shipping Weight: 7,200 LBS
Register to Discount
$31,500
Finance As Low As
$644.81 Per Mo.*
more pictures
Compare

26" / 35 3/8" x 120" Brand New Acra Precision Engine Lathe, Mdl. 26120ACH, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM26120ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
26120ACH
Capacity: 26" / 35 3/8" x 120"
Stock: #SM26120ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 35 3/8" x 120"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 35 3/8"
Distance Between Centers: 120"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 7,400 LBS
Shipping Weight: 7,700 LBS
Dimensions (LxWxH): 190" x 50" x 60"
Register to Discount
$35,500
Finance As Low As
$726.69 Per Mo.*
more pictures
Compare

26" / 35 3/8" x 160" Brand New Acra Precision Engine Lathe, Mdl. 26160ACH, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady (1 3/5" - 10"), #SM26160ACH

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
26160ACH
Capacity: 26" / 35 3/8" x 160"
Stock: #SM26160ACH
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 35 3/8" x 160"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 35 3/8"
Distance Between Centers: 160"
Bed Width: 15 3/4"
Spindle Nose: D1-11
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds - Steps: 12
Spindle Speeds - Range: 13 - 1200 RPM
Cross SlideTravel: 9 9/16"
Compound Slide Travel: 5 3/8"
Inch Threads: 2 - 72 TPI
Metric Threads: 0.2 - 14 mm
Longitudinal Feeds: 0.035 - 0.09"/rev
Cross Feeds: 0.0175 - 0.045"/rev
Quill Diameter: 2 15/16"
Quill Travel: 7"
Quill Taper: MT NO.5
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 7,900 LBS
Shipping Weight: 8,450 LBS
Dimensions (LxWxH): 230" x 50" x 60"
Register to Discount
$43,000
Finance As Low As
$880.21 Per Mo.*
more pictures
Compare

26" / 38 1/8" x 80" Brand New Acra Precision Engine Lathe, Mdl. 2680HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM2680HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
2680HR
Capacity: 26" / 38 1/8" x 80"
Stock: #SM2680HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 38 1/8" x 80"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 38 1/8"
Distance Between Centers: 80"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 12 - 1000 RPM (12 Speeds)
Cross SlideTravel: 13 3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 8,159 LBS
Register to Discount
$41,800
Finance As Low As
$855.65 Per Mo.*
more pictures
Compare

26" / 38 1/8" x 120" Brand New Acra Precision Engine Lathe, Mdl. 26120HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM26120HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
26120HR
Capacity: 26" / 38 1/8" x 120"
Stock: #SM26120HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 38 1/8" x 120"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 38 1/8"
Distance Between Centers: 120"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 12 - 1000 RPM (12 Speeds)
Cross SlideTravel: 13 3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 8,820 LBS
Register to Discount
$46,750
Finance As Low As
$956.97 Per Mo.*
more pictures
Compare

26" / 38 1/8" x 160" Brand New Acra Precision Engine Lathe, Mdl. 26160HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM26160HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
26160HR
Capacity: 26" / 38 1/8" x 160"
Stock: #SM26160HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 38 1/8" x 160"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 38 1/8"
Distance Between Centers: 160"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 12 - 1000 RPM (12 Speeds)
Cross SlideTravel: 13 3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 10,800 LBS
Register to Discount
$52,250
Finance As Low As
$1,069.56 Per Mo.*
more pictures
Compare

26" / 38-1/8" x 200" Brand New Acra Precision Engine Lathe, Mdl. 26200HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM26200HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
26200HR
Capacity: 26" / 38-1/8" x 200"
Stock: #SM26200HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 26" / 38-1/8" x 200"
Swing Over Bed: 26"
Swing Over Cross Slide: 17 3/8"
Swing In Gap: 38 1/8"
Distance Between Centers: 200"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 12 - 1000 RPM (12 Speeds)
Cross SlideTravel: 13 3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 12,790 LBS
Register to Discount
$60,500
Finance As Low As
$1,238.44 Per Mo.*
more pictures
Compare

31" / 42-1/8" x 80" Brand New Acra Precision Engine Lathe, Mdl. 3180HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM3180HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
3180HR
Capacity: 31" / 42-1/8" x 80"
Stock: #SM3180HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 31" / 42-1/8" x 80"
Swing Over Bed: 31"
Swing Over Cross Slide: 21-1/4"
Swing In Gap: 42-1/8"
Distance Between Centers: 80"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 10-800 RPM (12 Speeds)
Cross SlideTravel: 15-3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 8,600 LBS
Register to Discount
$44,300
Finance As Low As
$906.82 Per Mo.*
more pictures
Compare

31" / 42-1/8" x 120" Brand New Acra Precision Engine Lathe, Mdl. 31120HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM31120HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
31120HR
Capacity: 31" / 42-1/8" x 120"
Stock: #SM31120HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 31" / 42-1/8" x 120"
Swing Over Bed: 31"
Swing Over Cross Slide: 21-1/4"
Swing In Gap: 42-1/8"
Distance Between Centers: 120"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 10-800 RPM (12 Speeds)
Cross SlideTravel: 15-3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 9,260 LBS
Register to Discount
$49,800
Finance As Low As
$1,019.41 Per Mo.*
more pictures
Compare

31" / 42-1/8" x 160" Brand New Acra Precision Engine Lathe, Mdl. 31160HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM31160HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
31160HR
Capacity: 31" / 42-1/8" x 160"
Stock: #SM31160HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 31" / 42-1/8" x 160"
Swing Over Bed: 31"
Swing Over Cross Slide: 21-1/4"
Swing In Gap: 42-1/8"
Distance Between Centers: 160"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 10-800 RPM (12 Speeds)
Cross SlideTravel: 15-3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 11,245 LBS
Register to Discount
$55,300
Finance As Low As
$1,131.99 Per Mo.*
more pictures
Compare

31" / 42-1/8" x 200" Brand New Acra Precision Engine Lathe, Mdl. 31200HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM31200HR

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
31200HR
Capacity: 31" / 42-1/8" x 200"
Stock: #SM31200HR
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 31" / 42-1/8" x 200"
Swing Over Bed: 31"
Swing Over Cross Slide: 21-1/4"
Swing In Gap: 42-1/8"
Distance Between Centers: 200"
Bed Width: 18"
Spindle Nose: D1-11 (A2-11 Opt.)
Spindle Bore: 4 1/8"
Taper of Spindle: MT NO.7
Spindle Speeds: 10-800 RPM (12 Speeds)
Cross SlideTravel: 15-3/8"
Compound Slide Travel: 9 1/2"
Inch Threads: 36KINDS 2-28 TPI
Metric Threads: 65KINDS 0.8-14 MM
Module Threads: 22KINDS 0.5-7
Diametrical Threads: 36KINDS 4-56
Longitudinal Feeds: 36KINDS 0.002-0.0276 IPR
Cross Feeds: 36KINDS 0.001-0.01378 IPR
Quill Diameter: 4 1/8"
Quill Travel: 8 1/4"
Quill Taper: MT NO.6
Spindle Drive Motor: 15 HP
Voltage: 220 / 440V AC/ 3 PH
Net Weight: 13,230 LBS
Register to Discount
$65,450
Finance As Low As
$1,339.76 Per Mo.*
more pictures
Compare

11" x 18" Brand New Acra Precision Tool Room Lathe (Hardinge Copy), Mdl. 618EVS, 5C Lever Collet Closer, Special Tools, Coolant System, Direct Reading Spindle Speeds, Tool Holder, #SM618EVS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
618EVS
Capacity: 11" x 18"
Stock: #SM618EVS
Category: Lathes
Subcategory: Precision
Condition: New Machinery
Spindle Capacity With Chuck: 6"
Capacity w/ Expanding Collets: 3"
Capacity w/ Round 5C Collets: 1-1/16"
Capacity w/ Hexagon 5C Collets: 7/8"
Capacity w/ Square 5C Collets: 3/4"
Capacity w/ Step Chucks: 1 1/16" - 6"
Spindle Nose Diameter: 2-3/16"
Spindle Nose: 5C (10°) / 4° x Taper
Spindle RPM (Variable): 0 - 4000 RPM
Spindle Motor: 3 H.P.
Hole Through Spindle: 1-1/4"
Bar Stock Diameter (5C Collet) Collet): 1-1/16"
Swing Over Bed: 11"
Swing Over Carriage: 9"
Swing Over Cross Slide: 6"
Carriage Power Feed Range: 3/16" - 4"
Cross Slide Travel: 6"
Quick-Action Compound Slide Travel: 0.1"
Compound Slide Travel: 3"
Coolant Pump: 1/8 HP, 220V, 3PH
Feed Motor: 220V
Range of Threads: 0.275 - 2.7mm (108 - 11TPI)
Net Weight: 2300 LBS
Shipping Weight: 2530 LBS
Dimensions (LxWxH): 73" x 30" x 67"
Register to Discount
$24,000
Finance As Low As
$491.28 Per Mo.*
more pictures
Compare

13" x 14" Brand New Acra Precision Tool Room Lathe & Chucker - Hardinge Copy, Mdl. 68EVS, 5C Lever Collet Closer, Special Tools, Coolant System, Direct Reading Spindle Speeds, Tool Holder, 8 Position Tool Turret, 8 Position Carriage Stop, #SM68EVS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
68EVS
Capacity: 13" x 14"
Stock: #SM68EVS
Category: Lathes
Subcategory: Second Operation & Chuckers, Precision
Condition: New Machinery
Spindle Capacity With Chuck: 6"
Capacity w/ Expanding Collets: 3"
Capacity w/ Round 5C Collets: 1-1/16"
Capacity w/ Hexagon 5C Collets: 7/8"
Capacity w/ Square 5C Collets: 3/4"
Capacity w/ Step Chucks: 1 1/16" - 6"
Spindle Nose Diameter: 2-3/16"
Spindle Nose: 5C (10°) / 2-3/16" - 10 R.H
Spindle RPM (Variable): 0 - 4000 RPM
Spindle Motor: 3 HP / 5 HP (Optional)
Hole Through Spindle: 1-1/4"
Bar Stock Diameter (5C Collet) Collet): 1-1/16"
Swing Over Bed: 13"
Swing Over Carriage
Swing Over Cross Slide
Carriage Power Feed Range: 1/4" - 10"
Cross Slide Travel: 4 1/2"
Quick-Action Compound Slide Travel
Compound Slide Travel
Coolant Pump: 1/8 HP, 220V, 3PH
Feed Motor: 220V
Range of Threads
Dimensions (LxWxH): 73" x 30" x 67"
Net Weight: 2200 LBS
Shipping Weight: 2420 LBS
Register to Discount
$22,500
Finance As Low As
$460.58 Per Mo.*
more pictures
Compare

11" x 18" Brand New Acra Precision Tool Room Lathe (Hardinge Copy), Mdl. 618CTL, 5C Lever Collet Closer, Special Tools, Coolant System, Direct Reading Spindle Speeds, Tool Holder, Electronic Threading, D.R.O., #SM618CTL

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
618CTL
Capacity: 11" x 18"
Stock: #SM618CTL
Category: Lathes
Subcategory: Precision
Condition: New Machinery
Spindle Capacity With Chuck: 6"
Capacity w/ Expanding Collets: 3"
Capacity w/ Round 5C Collets: 1-1/16"
Capacity w/ Hexagon 5C Collets: 7/8"
Capacity w/ Square 5C Collets: 3/4"
Capacity w/ Step Chucks: 1 1/16" - 6"
Spindle Nose Diameter: 2-3/16"
Spindle Nose: 5C (10°) / 4° x Taper
Spindle RPM (Variable): 0 - 4000 RPM
Spindle Motor: 5 HP
Hole Through Spindle: 1-1/4"
Bar Stock Diameter (5C Collet) Collet): 1-1/16"
Swing Over Bed: 11"
Swing Over Carriage: 9"
Swing Over Cross Slide: 6"
Carriage Power Feed Range: 3/16" - 4"
Cross Slide Power Feed Range: 5/16" - 7"
Cross Slide Travel: 6"
Quick-Action Compound Slide Travel: 0.1"
Compound Slide Travel: 3"
Tailstock Quill Travel: 3-3/4"
Coolant Pump: 1/8 HP, 220V, 3PH
Feed Motor: Inverter 1/2 HP
Range of Threads: 0.2~10mm (4~120 per inch)
Dimensions (LxWxH): 73" x 30" x 67"
Net Weight: 2420 LBS
Shipping Weight: 2640 LBS
Register to Discount
$27,500
Finance As Low As
$562.93 Per Mo.*
more pictures

videos
Compare

10'' x 18'' Brand New Acra Horizontal (SWIVEL BASE FOR QUICK MITER CUTS) Bandsaw, Mdl. RF-1018 SRV, Laser Guide, Coolant System, Work Length Stop, #SMRF1018SRV

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
RF-1018 SRV
Capacity: 10'' x 18''
Stock: #SMRF1018SRV
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New Machinery
Operation:: Manual
Type: Swivel Head
Capacity:
Rectangle (90 Degrees): 10'' x 18''
Rectangle (45 degrees): 10'' x 9 1/2''
Round (90 Degrees): 10''
Round (45 Degrees): 8 1/2''
Blade Speed (Variable): 62 - 335 FPM
Blade Size: 1.06" x 0.035" x 121.65"
Horsepower: 2 H.P.
Voltage: 240v/480v 3 Phase
Dimensions (L x W x H): 68'' x 30'' x 45''
Weight: 1,200 Lbs.
Register to Discount
$5,150
Finance As Low As
$105.42 Per Mo.*
more pictures
Compare

12 Ga. x 4' Brand New Acra Box & Pan Manual Finger Brake, Mdl. FP-S4812, Stand, #SMFPS4812

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FP-S4812
Capacity: 12 Ga. x 4'
Stock: #SMFPS4812
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Capacity (Mild Steel): 12 Ga.
Max. Bending Length: 48"
Fingers Width: 2"- 3"- 4"
Degree Of Bend Maximum: 120 Degrees
Dimensions: 73" x 31" x 46"
Weight: 2,300 Lbs.
Register to Discount
$4,950
Finance As Low As
$101.33 Per Mo.*
more pictures
Compare

10 Ga. x 6" x 6" Brand New Acra Hand Operated Notcher, Mdl. FN-M616, Work Guides, #SMFNM616

>> View Complete Specs

Acra Notchers

Manufacturer: Acra
Model:
FN-M616
Capacity: 10 Ga. x 6" x 6"
Stock: #SMFNM616
Category: Notchers
Condition: New Machinery
Tonnage: 4
Capacity (Mild Steel): 16 GA.
Shearing Capacity: 6" x 6"
Ram Stroke: 3/4"
Table Size: 18" x 12"
Weight: 240 Lbs.
Register to Discount
$850
more pictures
Compare

9" x 15" Brand New Acra Second Operation Toolmakers Lathe, Mdl. 27ATS, Lever 5C Collet Closer, Six Station Bed Turret, Tailstock, Double Tool Cross Slide, Automatic Spindle Brake, Compound, Cross Slide, Coolant System, #SM27ATS

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
27ATS
Capacity: 9" x 15"
Stock: #SM27ATS
Category: Lathes
Subcategory: Second Operation & Chuckers
Condition: New Machinery
Spindle Capacity w/ Chuck: 6"
Spindle w/ Expanding Collets: 3"
Spindle w/ Round 5C Collets: 1-1/16"
Spindle w/ Hexagon 5C Collets: 7/8"
Spindle w/ Square 5C Collets: 3/4"
Spindle w/ Step Chucks: 1-1/16" - 6"
Spindle Nose Diameter: 2-3/16"
Spindle Nose: 5C (10 Degrees)/4 Degree x Taper
Spindle RPM (Variable): 0 - 4000 RPM
Spindle Motor: 3 HP
Hole Through Spindle: 1-1/4"
Bar Stock Diameter (5C Collet) : 1-1/16"
Distance Between Centers: 15"
Swing Over Bed: 9"
Cross Slide Travel: 3-3/4"
Compound Slide Travel: X - 4-1/2" Z - 5-1/2"
Tailstock Spindle Travel: 3-3/4"
Coolant Pump: 1/8 HP, 220V, 3PH
Net Weight: 990 LBS
Shipping Weight: 1,364 LBS
Dimensions (L x W x H): 69" x 28" x 63"
Register to Discount
$14,000
Finance As Low As
$286.58 Per Mo.*
more pictures
Compare

9" x 15" Brand New Acra Second Operation Toolmakers Lathe, Mdl. 27ATL, Lever 5C Collet Closer, Six Station Bed Turret, Tailstock, Double Tool Cross Slide, Automatic Spindle Brake, Compound, Cross Slide, Coolant System, #SM27ATL

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
27ATL
Capacity: 9" x 15"
Stock: #SM27ATL
Category: Lathes
Subcategory: Second Operation & Chuckers
Condition: New Machinery
Spindle Capacity w/ Chuck: 6"
Spindle w/ Expanding Collets: 3"
Spindle w/ Round 5C Collets: 1-1/16"
Spindle w/ Hexagon 5C Collets: 7/8"
Spindle w/ Square 5C Collets: 3/4"
Spindle w/ Step Chucks: 1-1/16" - 6"
Spindle Nose Diameter: 2-3/16"
Spindle Nose: 5C (10 Degrees)/4 Degree x Taper
Spindle RPM (Variable): 0 - 4000 RPM
Spindle Motor: 3 HP
Hole Through Spindle: 1-1/4"
Bar Stock Diameter (5C Collet) : 1-1/16"
Distance Between Centers: 15"
Swing Over Bed: 9"
Cross Slide Travel: 3-3/4"
Compound Slide Travel: X - 4-1/2" Z - 5-1/2"
Tailstock Spindle Travel: 3-3/4"
Coolant Pump: 1/8 HP, 220V, 3PH
Net Weight: 990 LBS
Shipping Weight: 1,364 LBS
Dimensions (L x W x H): 69" x 28" x 63"
Register to Discount
$14,000
Finance As Low As
$286.58 Per Mo.*
more pictures
Compare

9" x 10" Brand New Acra Second Operation Toolmakers Lathe, Mdl. 27AFL, Lever 5C Collet Closer, #SM27AFL

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
27AFL
Capacity: 9" x 10"
Stock: #SM27AFL
Category: Lathes
Subcategory: Second Operation & Chuckers
Condition: New Machinery
Spindle Capacity w/ Chuck: 5"
Spindle w/ Expanding Collets: 3"
Spindle w/ Round 5C Collets: 1-1/16"
Spindle w/ Hexagon 5C Collets: 7/8"
Spindle w/ Square 5C Collets: 3/4"
Spindle w/ Step Chucks: 1-1/16" - 6"
Spindle Nose Diameter: 2-3/16"
Spindle Nose: 5C (10 Degrees)/4 Degree x Taper
Spindle RPM (Variable): 0 - 4000 RPM
Spindle Motor: 1 HP
Bar Stock Diameter (5C Collet) : 1-1/16"
Swing Over Bed: 9"
Coolant Pump: Optional
Net Weight: 660 LBS
Shipping Weight: 820 LBS
Dimensions (L x W x H): 36" x 36" x 55"
Register to Discount
$8,000
Finance As Low As
$163.76 Per Mo.*
more pictures
Compare

10" x 54" Brand New Acra Vertical Milling Machine (Step Pulley) "Bridgeport Copy", Mdl. AM3S, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM3S

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM3S
Capacity: 10" x 54"
Stock: #SMAM3S
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 10" x 54"
X Axis Travel: 39 1/2"
Y & Z Axis Travel: 16 1/2". 16"
Ram Travel: 18"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: R-8 or #30
Speed Selector: Variable Speed
Spindle Speed: 2 Speed
Spindle RPM: 80-5440 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 2 H.P.
Votlage: 220V/440V
Dimensions (L x W x H): 69" x 57" x 92"
Weight: 3,400 LBS
Register to Discount
Starting At $8,450
Finance As Low As
$172.97 Per Mo.*
more pictures
Compare

10" x 54" Brand New Acra Vertical Milling Machine (Variable Speed) "Bridgeport Copy", Mdl. AM3V, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM3V

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM3V
Capacity: 10" x 54"
Stock: #SMAM3V
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 10" x 54"
X Axis Travel: 39 1/2"
Y & Z Axis Travel: 16 1/2". 16"
Ram Travel: 18"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: R-8 or #30
Speed Selector: Variable Speed
Spindle RPM: 65~4200 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220/440V AC/3PH
Dimensions (L x W x H): 69" x 57" x 88"
Weight: 3,400 LBS
Register to Discount
Starting At $9,000
Finance As Low As
$184.23 Per Mo.*
more pictures
Compare

10" x 54" Brand New Acra Vertical Milling Machine (AC Inverter Drive) "Bridgeport Copy", Mdl. AM3AC, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM3AC

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM3AC
Capacity: 12" x 54"
Stock: #SMAM3AC
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 10" x 54"
X Axis Travel: 39 1/2"
Y & Z Axis Travel: 16 1/2". 16"
Ram Travel: 18"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: R-8 or #30
Speed Selector: Variable Speed
Spindle RPM: 50~5,000 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Power Draw Bar: Yes
Digital Readout: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220V/3PH/1PH (Opt 440V)
Dimensions (L x W x H): 74" x 60" x 88"
Weight: 3,400 LBS
Register to Discount
Starting At $10,250
Finance As Low As
$209.82 Per Mo.*
more pictures
Compare

9" x 49" Brand New Acra Vertical Milling Machine (Step Pulley Type) "Bridgeport Copy", Mdl. AM2S-949, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM2S949

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM2S-949
Capacity: 9" x 49"
Stock: #SMAM2S949
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 9" x 49"
X Axis Travel: 35 1/2"
Y & Z Axis Travel: 12 1/2". 16"
Ram Travel: 12 1/4"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: R-8 or #30
Spindle Speed: 2 Speed
Speed Selector: Variable Speed
Spindle RPM: 80-5440 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Digital Readout: No
Table Feed: No
Power Draw Bar: No
Horsepower: 2
Voltage: 220v/440v, 3 Phase
Dimensions (L x W x H): 56" x 57" x 90"
Weight: 2,200 LBS
Register to Discount
Starting At $6,700
Finance As Low As
$137.15 Per Mo.*
more pictures

videos
Compare

9" x 42" Brand New Acra Vertical Milling Machine (Variable Speed) "Bridgeport Copy", Mdl. AM2V-942, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM2V942

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM2V-942
Capacity: 9" x 42"
Stock: #SMAM2V942
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 9'' x 42''
X Axis Travel: 30"
Y & Z Axis Travel: 12 1/2". 16"
Ram Travel: 12 1/4"
T-Slot Number , Size: 3 , 5/8"
Speed Selector: Variable Speed
Spindle Motor: R-8 or #30
Spindle RPM: 65~4200 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Power Draw Bar: No
Table Feed: No
Digital Readout: No
Horsepower: 3 H.P.
Voltage: 220/440v, 3 Phase
Dimensions (L x W x H): 54" x 48" x 90"
Weight: 2,200 LBS
Register to Discount
Starting At $7,000
Finance As Low As
$143.29 Per Mo.*
more pictures

videos
Compare

9" x 49" Brand New Acra Vertical Milling Machine (Variable Speed) "Bridgeport Copy", Mdl. AM2V-949, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, One-Shot Lube System, Made In Taiwan, #SMAM2V949

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM2V-949
Capacity: 9" x 49"
Stock: #SMAM2V949
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 9" x 49"
X Axis Travel: 35 1/2"
Y & Z Axis Travel: 12 1/2". 16"
Ram Travel: 12 1/4"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: R-8 or #30
Speed Selector: Variable Speed
Spindle RPM: 65~4,200 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Power Draw Bar: No
Digital Readout: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220/440V AC/3PH
Dimensions (L x W x H): 56" x 57" x 90"
Weight: 2,200 LBS
Register to Discount
Starting At $7,250
Finance As Low As
$148.41 Per Mo.*
more pictures
Compare

9" x 42" Brand New Acra Vertical Milling Machine (AC Inverter Drive) "Bridgeport Copy", Mdl. AM2AC-942, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM2AC942

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM2AC-942
Capacity: 9" x 42"
Stock: #SMAM2AC942
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 9'' x 42''
X Axis Travel: 30"
Y & Z Axis Travel: 12 1/2". 16"
Ram Travel: 12 1/4"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: R-8 or #30
Speed Selector: A/C Inverter Frequency Drive
Spindle RPM: 50~5,000 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Power Draw Bar: No
Digital Readout: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220V/3PH/1PH (Opt 440V)
Dimensions (L x W x H): 54" x 48" x 90"
Weight: 2,200 LBS
Register to Discount
Starting At $8,250
Finance As Low As
$168.88 Per Mo.*
more pictures
Compare

9" x 49" Brand New Acra Vertical Milling Machine (AC Inverter Drive) "Bridgeport Copy", Mdl. AM2AC-949, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM2AC949

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM2AC-949
Capacity: 9" x 49"
Stock: #SMAM2AC949
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 9" x 49"
X Axis Travel: 35 1/2"
Y & Z Axis Travel: 12 1/2". 16"
Ram Travel: 12 1/4"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: R-8 or #30
Speed Selector: A/C Inverter Frequency Drive
Spindle RPM: 50~5,000 RPM
Quill Diameter: 3 3/8"
Quill Travel: 5"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220V/3PH/1PH (Opt 440V)
Dimensions (W x L x H): 57" x 57" x 88"
Weight: 2,200 LBS
Register to Discount
Starting At $8,500
Finance As Low As
$174.00 Per Mo.*
more pictures
Compare

10" x 54" Brand New Acra Vertical Milling Machine (Variable Speed) "Bridgeport Copy", Mdl. AM4V, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM4V

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM4V
Capacity: 10" x 54"
Stock: #SMAM4V
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 10" x 54"
X Axis Travel: 39 1/2"
Y & Z Axis Travel: 16". 16"
Ram Travel: 18"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: #40
Speed Selector: Variable Speed
Spindle RPM: 50~3,750 RPM
Quill Diameter: 4"
Quill Travel: 5"
Equipped With:
Digital Readout: No
Table Feed: No
Power Draw Bar: No
Horsepower: 5 H.P.
Voltage: 220/440V AC/3PH
Dimensions (L x W x H): 56 1/2" x 68 1/2" x 90"
Weight: 3,520 LBS
Register to Discount
Starting At $11,250
Finance As Low As
$230.29 Per Mo.*
more pictures
Compare

10" x 54" Brand New Acra Vertical Milling Machine (AC Inverter Drive) "Bridgeport Copy", Mdl. AM4AC, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, #SMAM4AC

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM4AC
Capacity: 10" x 54"
Stock: #SMAM4AC
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 10" x 54"
X Axis Travel: 39 1/2"
Y & Z Axis Travel: 16". 16"
Ram Travel: 18"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: #40
Speed Selector: Variable Speed
Spindle RPM: 50~5,000 RPM
Quill Diameter: 4"
Quill Travel: 5"
Equipped With:
Power Draw Bar: No
Digital Readout: No
Table Feed: No
Horsepower: 5 H.P.
Voltage: 220V/3PH/1PH (Opt 440V)
Dimensions (L x W x H): 56 1/2" x 68 1/2" x 90"
Weight: 3,520 LBS
Register to Discount
Starting At $11,500
Finance As Low As
$235.41 Per Mo.*
more pictures
Compare

12" x 58" Brand New Acra Vertical Milling Machine (Variable Speed) "Bridgeport Copy", Mdl. AM5V, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, Coolant System, Z Axis Power Rapid, Splash Guard, #SMAM5V

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM5V
Capacity: 12" x 58"
Stock: #SMAM5V
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 12" x 58"
X Axis Travel: 42"
Y & Z Axis Travel: 15-1/2". 16"
Ram Travel: 21"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: #40
Speed Selector: Variable Speed
Spindle RPM: 50~3,750 RPM
Quill Diameter: 4"
Quill Travel: 5"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 5 H.P.
Voltage: 220/440V AC/3PH
Dimensions (L x W x H): 58-1/2" x 72-1/2" x 90"
Weight: 3,960 LBS
Register to Discount
$13,500
Finance As Low As
$276.35 Per Mo.*
more pictures
Compare

12" x 58" Brand New Acra Vertical Milling Machine (AC Inverter Drive) "Bridgeport Copy", Mdl. AM5AC, Hardened & Ground Table & Ways, Quill Heat Treat Hardened & Chromed, Double Wall Construction, Turcite On The Table X & Y Axis, Coolant System, Splash Guard, Z Axis Power Rapid, #SMAM5AC

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM5V
Capacity: 12" x 58"
Stock: #SMAM5AC
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 12" x 58"
X Axis Travel: 42"
Y & Z Axis Travel: 15-1/2". 16"
Ram Travel: 21"
T-Slot Number , Size: 3 , 5/8"
Spindle Motor: #40
Speed Selector: A/C Inverter Frequency Drive
Spindle RPM: 50~5,000 RPM
Quill Diameter: 4"
Quill Travel: 5"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Knee Feed: Yes
Table Feed: No
Horsepower: 5 H.P.
Voltage: 220V 1PH/3PH
Dimensions (L x W x H): 58-1/2" x 72-1/2" x 90"
Weight: 4,000 Lbs.
Register to Discount
Starting At $14,950
Finance As Low As
$306.03 Per Mo.*
more pictures
Compare

11-13/16" x 51-3/16" Brand New Acra Vertical/Horizontal Milling Machine "Bridgeport Copy", Mdl. AMJY2HT, Double Box Ways, Spindle Brake & Lock, Auto Lube System, Box Column Ways, Three Axis Simultaneous Movement & Rapid, Boring & Tapping Feature, #SMAMJY2HT

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AMJY2HT
Capacity: 11-13/16" x 51-3/16"
Stock: #SMAMJY2HT
Category: Milling Machines
Subcategory: Ram Type (Horizontal & Vertical)
Condition: New Machinery
Table Size: 11-13/16" x 51-3/16"
Longitudinal Travel: 39-3/8"
Cross Travel: 15-3/8"
Vertical Knee Travel: 19-5/16"
Vertical Spindle
Spindle Taper: N.S.T. #40
Speed Selector: A/C Inverter Frequency Drive
Spindle RPM: 16 Steps 75 - 3600
Distance From Spindle Nose To Table: 4-5/16" - 22-1/16"
Distance From Center Spindle To Column: 4-5/16" - 27-9/16"
Quill Travel: 5 1/2"
Cross Travel Ram: 26"
CNC Axis: 3 Axis
Controller: Acra
Horizontal Spindle:
Spindle Taper: N.S.T. #40
Spindle RPM: 9 Steps 85-1300
Distance From Center Spindle To Overarm: 14-1/2"
Distance From Center Spindle To Table Surface: 0" - 17-11/16"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Main Motor (Vertical): 5 HP
Main Motor (Horizontal): 5 HP
Voltage: 220V AC/1PH/3PH
Dimensions (LxWxH): 72" x 89" x 83"
Weight: 5,500 LBS
Register to Discount
$37,500
Finance As Low As
$767.63 Per Mo.*
more pictures
Compare

22" Brand New Acra Floor Drill With Powered Down Feed, Mdl. MDP-435VA, Power Down Feed, #SMMDP435VA

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
MDP-435VA
Capacity: 22"
Stock: #SMMDP435VA
Category: Drills
Subcategory: Floor Type (Heavy Duty)
Condition: New Machinery
Drilling Capacity
Steel: 1"
Cast Iron: 1-1/4"
Tapping Capacity
Steel: 3/4"
Cast Iron: 15/16"
Column Diameter: 4-5/16"
Spindle Taper: #4 MT
Spindle Center To Column: 11"
Spindle Nose to Table: 6-5/16" - 16-1/8"
Spindle RPM: 125 - 4000 RPM
Table Size: 19-5/16" - 16-1/8"
Type:: Variable Speed
Main Motor: 2 HP
Voltage: 220V/3PH
Dimensions (L x W x H): 33-5/16" x 19-3/4" x 73-1/4"
Weight: 730 LBS
Register to Discount
$2,450
Finance As Low As
$50.15 Per Mo.*
more pictures
Compare

12 Ga. x 8' Brand New Acra Box & Pan Manual Finger Brake, Mdl. FP-S9612, Stand, #SMFPS9612

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FP-S9612
Capacity: 12 Ga. x 8'
Stock: #SMFPS9612
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Capacity (Mild Steel): 12 Ga.
Max. Bending Length: 96"
Fingers Width: 2"- 3"- 4"
Degree Of Bend Maximum: 120 Degrees
Dimensions: 73" x 31" x 96"
Weight: 3,652 Lbs
Register to Discount
$7,200
Finance As Low As
$147.38 Per Mo.*
more pictures
Compare

16 Ga. x 8' Brand New Acra Box & Pan Finger Brake, Mdl. FP-S9616, Stand, #SMFPS9616

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FP-S9616
Capacity: 16 Ga. x 8'
Stock: #SMFPS9616
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Capacity (Mild Steel): 16 Ga.
Max. Bending Length: 96"
Fingers Width: 2"- 3"- 4"
Degree Of Bend Maximum: 120 Degrees
Dimensions: 73" x 31" x 96"
Weight: 2,840 Lbs
Register to Discount
$6,500
Finance As Low As
$133.06 Per Mo.*
more pictures
Compare

14 Ga. x 10' Brand New Acra Box & Pan Manual Finger Brake, Mdl. FP-S12014, Stand, #SMFPS12014

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FP-S12014
Capacity: 14 Ga. x 10'
Stock: #SMFPS12014
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Capacity (Mild Steel): 14 Ga.
Max. Bending Length: 120"
Fingers Width: 2"- 3"- 4"
Degree Of Bend Maximum: 120 Degrees
Dimensions: 73" x 31" x 120"
Weight: 4,420 Lbs
Register to Discount
$8,400
Finance As Low As
$171.95 Per Mo.*
more pictures
Compare

16 Ga. x 10' Brand New Acra Box & Pan Finger Brake, Mdl. FP-S12016, Stand, #SMFPS12016

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FP-S12016
Capacity: 16 Ga. x 10'
Stock: #SMFPS12016
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Capacity (Mild Steel): 16 Ga.
Max. Bending Length: 120"
Fingers Width: 2"- 3"- 4"
Degree Of Bend Maximum: 120 Degrees
Dimensions: 73" x 31" x 120"
Weight: 3,430 Lbs
Register to Discount
$7,400
Finance As Low As
$151.48 Per Mo.*
more pictures
Compare

12 Ga. x 4' Brand New Acra Box & Pan Manual Finger Brake, Mdl. FP-B4812, Stand, Made In China, #SMFPB4812C

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FP-B4812
Capacity: 12 Ga. x 4'
Stock: #SMFPB4812C
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Capacity (Mild Steel): 12 Ga.
Max. Bending Length: 48"
Fingers Width: 2"- 3"- 4"
Degree Of Bend Maximum: 120 Degrees
Dimensions: 73" x 31" x 46"
Weight: 1,750 Lbs
Register to Discount
$2,250
Finance As Low As
$46.06 Per Mo.*
more pictures
Compare

16 Ga. x 4' Brand New Acra Floor Type Hand Brake, Mdl. FK-H5016, #SMFK-H5016

>> View Complete Specs

Acra Brake Press, Press Brake

Manufacturer: Acra
Model:
FK-H5016
Capacity: 16 Ga. x 4'
Stock: #SMFK-H5016
Category: Brake Press, Press Brake
Subcategory: Box & Pan/Hand-Manual, Box & Pan/Hand-Manual
Condition: New Machinery
Bending Length: 48"
Cap. Mild Steel: 16 GA.
Max. Deep Of Box: 4"
Max. Lift Of Beam: 1-1/4"
Net Weight: 450 LBS
Register to Discount
$1,000
more pictures
Compare

16"/22" x 40" Brand New Acra Gap Bed Engine Lathe, Mdl. 1640GCY, 8" 3 Jaw Chuck, 10"-4 Jaw Chuck, Steady / Follow Rest, Coolant System, Halogen Light, 4 Way Tool Holder, Full Length Splash Guard, Chuck Guard, Faceplate, #SM1640GCY

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1640GCY
Capacity: 16"/22" x 40"
Stock: #SM1640GCY
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Swing Over Bed: 16"
Swing Over Cross Slide: 10-3/16"
Swing In Gap: 22"
Distance Between Centers: 40"
Hole Thru Spindle: 2-1/32"
Spindle Nose: D1 - 6
Spindle Speeds (16): 33- 2,000 RPM
Horsepower: 7.5 H.P.
Voltage: 220 / 440V AC/ 3 PH
Threads: Inch: .0028 - .0387" TPI
Threads (Metric): 0.5 - 4
Threading MP: 0.5 - 3.5
Threading - Diametral Thread: 8 - 56
Dimensions (L x W x H): 88" x 51" x 79
Weight: 3,085 Lbs.
Register to Discount
Starting At $11,000
Finance As Low As
$225.17 Per Mo.*
more pictures

videos
Compare

16 Ga. x 4' Brand New Acra Hand Operated Slip Roll, Mdl. FR-S5016, With Stand, #SMFRS5016

>> View Complete Specs

Acra Rolls

Manufacturer: Acra
Model:
FR-S5016
Capacity: 16 Ga. x 4'
Stock: #SMFRS5016
Category: Rolls
Subcategory: Plate Bending (Slip Roll, Pyramid, Initial Pinch, Double Pinch)
Condition: New Machinery
Max. Width: 50"
Capacity (Mild Steel): 16 Ga.
Roll Diameter: 3"
Turning Ratio: 3:1
Dimensions (L x W x H): 68" x 17" x 40"
Weight: 600 Lbs.
Register to Discount
$1,850
more pictures
Compare

12" X 24" Brand New Acra Fully Automatic Surface Grinder, Mdl. 1224HS, Grinding Wheel, Diamond Wheel Dresser, Wheel Balancing Stand, Wheel Balancing Arbor, Wheel Flange, Leveling Screws & Plates, Flange Extractor, Halogen Light, #SM1224HS

>> View Complete Specs

Acra Grinders

Manufacturer: Acra
Model:
1224HS
Capacity: 12" X 24"
Stock: #SM1224HS
Category: Grinders
Subcategory: Surface, Reciprocating (Horizontal Spindle), N/C & CNC
Condition: New Machinery
Table Work Surface: 12" X 24"
Max. Table Travel: 14 1/2" X 27 1/2"
Grinding Wheel: 14" X 1 1/2" X 5"
Center Height: 25"
Wheel RPM: 1750
Horsepower: 5 H.P.
Voltage: 220/440V AC/3PH
Operation: 3 Axis Automatic
Weight: 4850 Lbs
Dimensions (L x W x H): 90" x 71" x 88"
Register to Discount
$21,000
Finance As Low As
$429.87 Per Mo.*
more pictures

videos
Compare

10'' x 18'' Brand New Acra Horizontal "Step Pulley Speed Control" Bandsaw, Mdl. RF-1018S, Laser Guide, Coolant System, Work Length Stop, Made In Taiwan, #SMRF1018S

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
RF-1018S
Capacity: 10'' x 18''
Stock: #SMRF1018S
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New Machinery
Operation:: Manual
Capacity:
Rectangle (90 Degrees): 10'' x 18''
Rectangle (45 degrees): 10'' x 9 1/2''
Round (90 Degrees): 10''
Round (45 Degrees): 8 1/2''
Blade Speed (Variable): 62 - 335 FPM
Blade Size: 1.06" x 0.035" x 121.65"
Voltage: 240v/480v 3 Phase
Horsepower: 2 H.P.
Dimensions (L x W x H): 68'' x 30'' x 45''
Weight: 1,200 Lbs.
Register to Discount
$3,125
Finance As Low As
$63.97 Per Mo.*
more pictures
Compare

4' x 11" Brand New Acra Radial Arm Drill, Mdl. FDR1300, Coolant System, Box Table, Tool Box, Made In Tiawan, #SMFDR1300

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
FDR1300
Capacity: 4' x 11"
Stock: #SMFDR1300
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 11"
Arm Length: 55-1/2"
Drilling Capacity In Steel: 2-1/8"
Drilling Capacity In Cast Iron: 2-1/2"
Tapping Capacity In Steel: 1-9/16"
Tapping Capacity In Cast Iron: 2"
Spindle Taper: #5MT
Spindle Diameter: 3-1/16"
Spindle Stroke: 9-7/8"
Spindle Speeds: 44- 1500 RPM
Horizontal Travel Of Head: 36-1/8"
Spindle Feeds: 0.02 ~ 0.012 IPR
Voltage: 230V ~ 3 Phase
Horsepower: 5 H.P.
Dimensions (L x W x H): 90" x 39" x 88"
Weight: 5,830 Lbs.
Register to Discount
$22,500
Finance As Low As
$460.58 Per Mo.*
more pictures
Compare

32" x 200" Brand New Acra Set High Speed Engine Lathe, Mdl. SET32200, Full Length Rear Splash Guard, 20" 3 Jaw Chuck, Steady & Follow Rests, Coolant System, Halogen Light, 4 Way Tool Holder, Full Length Splash Guard, Rapid Travel, #SMSET32200

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
SET32200
Capacity: 32" x 200"
Stock: #SMSET32200
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Swing Over Bed: 32"
Swing Over Cross Slide: 23"
Distance Between Centers: 200"
Swing In Gap: 44"
Hole Thru Spindle: 6"
Spindle Nose: A2-11
Spindle Speeds: 15 - 1000 RPM
Horsepower: 20 H.P.
Voltage: 220/440V AC/3PH
Register to Discount
$78,500
Finance As Low As
$1,606.90 Per Mo.*
more pictures
Compare

3' x 11" Brand New Acra Radial Arm Drill, Mdl. FRD1100, Coolant System, Box Table, Tool Box, Made In Tiawan, #SMFRD1100

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
FRD1100
Capacity: 3' x 11"
Stock: #SMFRD1100
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 11"
Arm Length: 45"
Drilling Capacity In Steel: 2"
Drilling Capacity In Cast Iron: 2-3/8"
Tapping Capacity In Steel: 1"
Tapping Capacity In Cast Iron: 1.25"
Spindle Taper: #4 MT
Spindle Diameter: 3-1/16"
Spindle Stroke: 9-7/8"
Spindle Speeds: 44- 1500 RPM
Horizontal Travel Of Head: 32"
Spindle Feeds: 0.02~0.006 IPR
Voltage: 220V ~ 3 Phase
Horsepower: 3 H.P.
Dimensions (L x W x H): 79" x 39" x 88"
Weight: 4,630 Lbs.
Register to Discount
$17,000
Finance As Low As
$347.99 Per Mo.*
more pictures
Compare

3' x 8" Brand New Acra Radial Arm Drill, Mdl. FRD900, Coolant System, Box Table, Tool Box, Made In Tiawan, #SMFRD900

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
FRD900
Capacity: 3' x 8"
Stock: #SMFRD900
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 8"
Arm Length: 36''
Drilling Capacity In Steel: 1-1/2"
Drilling Capacity In Cast Iron: 2"
Tapping Capacity In Steel: 3/4"
Tapping Capacity In Cast Iron: 1"
Spindle Taper: #4 MT
Spindle Diameter: 2 3/8"
Spindle Stroke: 7 7/8"
Spindle Speeds: 88 - 1500 RPM
Horizontal Travel Of Head: 24-13/16"
Spindle Feeds: 0.02~0.006 IPR
Voltage: 220V /440V, 3 Phase
Horsepower: 2 H.P.
Dimensions (L x W x H): 62" x 32" x 81"
Weight: 2,800 Lbs.
Register to Discount
$11,000
Finance As Low As
$225.17 Per Mo.*
more pictures
Compare

4' x 13" Brand New Acra Radial Arm Drill, Mdl. ARD1250, Coolant System, Tool Box, 19" x 24" Box Table, Made In China, #SMARD1250

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
ARD1250
Capacity: 4' x 13"
Stock: #SMARD1250
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 13"
Distance Column To Spindle: 13.78" - 49.21"
Distance Spindle To Base: 12.59" - 48"
Vertical Travel Of Arm: 22.83"
Distance of Head Travel: 35.43"
Drilling Capacity In Steel: 2"
Drilling Capacity In Cast Iron: 2-3/8"
Tapping Capacity In Steel: 1-21/32"
Tapping Capacity In Cast Iron: 1-7/8"
Spindle Taper: #5 MT
Spindle Diameter: 3.11"
Spindle Travel: 12"
Spindle Speeds: 25 - 2000 RPM
Horsepower: 5.4 H.P.
Voltage: 220V /440V, 3 Phase
Dimensions (L x W x H): 85" x 43" x 105"
Weight: 6,600 Lbs.
Register to Discount
$17,750
Finance As Low As
$363.34 Per Mo.*
more pictures
Compare

4' x 13" Brand New Acra Radial Arm Drill, Mdl. ARD1600, Coolant System, Tool Box, 19" x 24" Box Table, Made In China, #SMARD1600

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
ARD1600
Capacity: 4' x 13"
Stock: #SMARD1600
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 13"
Distance Column To Spindle: 13.78" - 63"
Distance Spindle To Base: 12.59" - 48"
Vertical Travel Of Arm: 22.83"
Distance of Head Travel: 49.21"
Drilling Capacity In Steel: 2"
Drilling Capacity In Cast Iron: 2-3/8"
Tapping Capacity In Steel: 1-21/32"
Tapping Capacity In Cast Iron: 1-7/8"
Spindle Taper: #5 MT
Spindle Diameter: 3.11"
Spindle Travel: 12"
Spindle Speeds: 25 - 2000 RPM
Horsepower: 5.4 H.P.
Voltage: 220V /440V, 3 Phase
Dimensions (L x W x H): 98" x 41" x 118"
Weight: 7,700 Lbs.
Register to Discount
$33,350
Finance As Low As
$682.67 Per Mo.*
more pictures
Compare

5' x 17" Brand New Acra Radial Arm Drill, Mdl. ARD2000, Coolant System, Tool Box, 24" x 31" Box Table, Made In China, #SMARD2000

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
ARD2000
Capacity: 5' x 17"
Stock: #SMARD2000
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 17"
Distance Column To Spindle: 17.71" - 78.74"
Distance Spindle To Base: 15.75" - 63"
Vertical Travel Of Arm: 31.50"
Distance of Head Travel: 61"
Drilling Capacity In Steel: 2-1/2"
Drilling Capacity In Cast Iron: 3"
Tapping Capacity In Steel: 2-3/16"
Tapping Capacity In Cast Iron: 2-1/2"
Spindle Taper: #5 MT
Spindle Diameter: 3.35"
Spindle Travel: 15 3/4"
Spindle Speeds: 20 - 1600 RPM
Horsepower: 7.4 H.P.
Voltage: 220/440V AC / 3 PH
Dimensions (L x W x H): 122" x 50" x 127"
Weight: 15,500 Lbs.
Register to Discount
$49,750
Finance As Low As
$1,018.38 Per Mo.*
more pictures
Compare

6' x 21" Brand New Acra Radial Arm Drill, Mdl. ARD2000, Coolant System, Tool Box, 31.5" x 39.37" Box Table, Made In China, #SMARD2500

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
ARD2000
Capacity: 6' x 21"
Stock: #SMARD2500
Category: Drills
Subcategory: Radial
Condition: New Machinery
Column Diameter: 21"
Distance Column To Spindle: 19.68" - 98.42"
Distance Spindle To Base: 21.65" - 78.74"
Vertical Travel Of Arm: 39.37"
Distance of Head Travel: 78.74"
Drilling Capacity In Steel: 3-5/32"
Drilling Capacity In Cast Iron: 3-3/4"
Tapping Capacity In Steel: 3-17/32"
Tapping Capacity In Cast Iron: 3-5/8"
Spindle Taper: #6 MT
Spindle Diameter: 4.1"
Spindle Travel: 17 5/8"
Spindle Speeds: 16 - 1250 RPM
Horsepower: 10 H.P.
Voltage: 220/440V AC / 3 PH
Dimensions (L x W x H): 147" x 52" x 151"
Weight: 24,200 Lbs.
Register to Discount
$67,500
Finance As Low As
$1,381.73 Per Mo.*
more pictures
Compare

14" x 40" Brand New Acra Gap Bed Engine Lathe, Mdl. 1440GWI, 6" 3 Jaw Chuck, 3" 4 Jaw Chuck, Face Plate, Coolant System, Halogen Light, Steady/Follow Reat, 4 Way Tool Holder, Full Length Splash Guard, Made in China, #SM1440GWI

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
1440GWI
Capacity: 14" x 40"
Stock: #SM1440GWI
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Swing Over Bed: 14"
Swing Over Cross Slide: 8-5/8"
Distance Between Centers: 40"
Hole Thru Spindle: 1-1/2"
Swing In Gap: 20"
Spindle Nose: D1-4
Spindle Speeds: 40 - 1800 RPM
Options:
5C Collet Closer: No
Digital Readout: No
Taper Attachment: No
Rapid Traverse:: No
Horsepower: 3 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x D x H)
Weight
Register to Discount
Starting At $7,950
Finance As Low As
$162.74 Per Mo.*
more pictures

videos
Compare

9" x 50" Brand New Acra MillPower CNC Vertical Mill 3 Axis CNC, Mdl. LCM-50 MillPWR 3AX, Milled Oil Grooves, Hard Chrome Ways, Hand Scraped Saddle, Meechanite Casting, ABEC-7 Spindle Bearings, One Shot Lube System, 10" Color LCD MillPower 3 Axis G2 Controller, Easy Conversational Shop Floor Programming, Translate DXF Files Directly Into Program Mode, Built-In Alphanumeric Engraving Capability, Direct Closed Loop Fedback From Precision Absolute Linear Scales, CF Flash Drive and RS-232 With Remote Storage Capability, Runs G-Code Files From CAD/CAM Programs For Full 3-D Contouring Capability, Remote Stop/Go Switch, 3-D Tactile-Feel Sealed Color Keypad, Immediate Part-View Graphics, Turcite On The Table X & Y Axis, Hardened & Ground Table & Ways, Auto Lubrication System, X,Y, & Z Scales, Double Wall Construction, #SMLCM50MILLPWR3AX

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
LCM-50 MillPWR 3AX
Capacity: 9" x 50"
Stock: #SMLCM50MILLPWR3AX
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table size: 9" x 50"
Longitudinal Travel: 36"
Cross Travel: 12"
Vertical Knee Travel: 16"
Spindle Quill Travel: 5"
Spindle Nose: R-8
Spindle Speeds: 60 - 4,500 RPM
Spindle To Table: 2-1/8" - 18"
Spindle Quill Feeds: 0.0015" - 0.003" -0.006"
Ram Travel: 12"
Equipped With:
Controller: MillPower
CNC Axis: 3 Axis
Power Draw Bar: No
Speed Selector: Variable Speed
Horsepower: 3 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x D x H): 78" x 71" x 86"
Weight: 2,700 Lbs.
Register to Discount
Starting At $30,000
Finance As Low As
$614.10 Per Mo.*
more pictures

videos
Compare

9" x 50" Brand New Acra Variable Speed Knee Milling Machine "Bridgeport Copy", Mdl. LCM-50, Milled Oil Grooves, Hard Chrome Ways, Hand Scraped Saddle, Meechanite Casting, ABEC-7 Spindle Bearings, One Shot Lube System, #SMLCM50

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
LCM-50
Capacity: 9" x 50"
Stock: #SMLCM50
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table size: 9" x 50"
Longitudinal Travel: 36"
Cross Travel: 12"
Vertical Knee Travel: 16"
Spindle Quill Travel: 5"
Spindle Nose: R-8
Spindle Speeds: 60 - 4,500 RPM
Spindle To Table: 2-1/8" - 18"
Spindle Quill Feeds: 0.0015" - 0.003" -0.006"
Ram Travel: 12"
Equipped With:
Digital Readout: No
Table Feed: No
Power Draw Bar: No
Speed Selector: Variable Speed
Horsepower: 3 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x D x H): 78" x 71" x 86"
Weight: 2,700 Lbs.
Register to Discount
Starting At $8,000
Finance As Low As
$163.76 Per Mo.*
more pictures

videos
Compare

9" x 50" Brand New Acra MillPower CNC Vertical Mill, Mdl. LCM-50 MillPWR 2AX, Milled Oil Grooves, Hard Chrome Ways, Hand Scraped Saddle, Meechanite Casting, ABEC-7 Spindle Bearings, One Shot Lube System, 10" Color LCD MillPower 2 Axis G2 Controller, Easy Conversational Shop Floor Programming, Translate DXF Files Directly Into Program Mode, Built-In Alphanumeric Engraving Capability, Direct Closed Loop Fedback From Precision Absolute Linear Scales, CF Flash Drive and RS-232 With Remote Storage Capability, Runs G-Code Files From CAD/CAM Programs For Full 3-D Contouring Capability, Remote Stop/Go Switch, 3-D Tactile-Feel Sealed Color Keypad, Immediate Part-View Graphics, Turcite On The Table X & Y Axis, Hardened & Ground Table & Ways, Auto Lubrication System, X,Y, & Z Scales, Double Wall Construction, #SMLCM50MILLPWR2AX

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
LCM-50 MillPWR 2AX
Capacity: 9" x 50"
Stock: #SMLCM50MILLPWR2AX
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type), CNC
Condition: New Machinery
Table size: 9" x 50"
Longitudinal Travel: 36"
Cross Travel: 12"
Vertical Knee Travel: 16"
Spindle Quill Travel: 5"
Spindle Nose: R-8
Spindle Speeds: 60 - 4,500 RPM
Spindle To Table: 2-1/8" - 18"
Spindle Quill Feeds: 0.0015" - 0.003" -0.006"
Ram Travel: 12"
Equipped With:
Controller: MillPower
CNC Axis: 2 Axis
Power Draw Bar: No
Speed Selector: Variable Speed
Horsepower: 3 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (W x D x H): 78" x 71" x 86"
Weight: 2,700 Lbs.
Register to Discount
$26,000
Finance As Low As
$532.22 Per Mo.*
more pictures

videos
Compare

10'' x 18'' Brand New Acra Horizontal (Variable Speed Blade Control) Band Saw, Mdl. RF-1018SV, Laser Guide, Coolant System, Work Length Stop, Variable Speed Drive, #SMRF1018SV

>> View Complete Specs

Acra Saws

Manufacturer: Acra
Model:
RF-1018SV
Capacity: 10'' x 18''
Stock: #SMRF1018SV
Category: Saws
Subcategory: Horizontal Bandsaw
Condition: New Machinery
Operation:: Manual
Capacity:
Rectangle (90 Degrees): 10'' x 18''
Rectangle (45 degrees): 10'' x 9 1/2''
Round (90 Degrees): 10''
Round (45 Degrees): 8 1/2''
Blade Speed (Variable): 62 - 335 FPM
Blade Size: 1.06" x 0.035" x 121.65"
Horsepower: 2 H.P.
Voltage: 240v/480v 3 Phase
Dimensions (L x W x H): 68'' x 30'' x 45''
Weight: 1,200 Lbs.
Register to Discount
$3,600
Finance As Low As
$73.69 Per Mo.*
more pictures
Compare

9" x 32" Brand New Rong Fu/Acra Milling/Drilling Machine , Mdl. RF45, Stand, Drill Chuck & Arbor, Draw Bar 1 Pc., Forward/Reverse Switch, #SMRF45

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
RF45
Capacity: 9" x 32"
Stock: #SMRF45
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Capacities:
Cast Iron: 1.5"
Steel: 1.25"
Face Mill: 4"
End Mill: 3/4"
Table Size: 9" x 32"
No. of T Slots: (4) 5/8"
Longitudinal Travel: 20-1/2"
Cross Travel: 8-1/4"
Spindle Travel: 5-1/8"
Swing: 20"
Spindle Taper: R-8 "Same As Bridgeport"
Speed Selector: Belt Change Pulley
Spindle Diameter: 3"
Spindle RPM: 60~1500 RPM
Spindle To Table: 18"
Spindle To Column: 10"
Equipped With:
Power Draw Bar: No
Digital Readout: No
Table Feed: No
Horsepower: 1.5 H.P.
Voltage: 110/220V, 1 Phase
Dimensions (L x D x H): 43" x 38" x 74"
Weight: 900 Lbs.
Register to Discount
$2,938
Finance As Low As
$60.14 Per Mo.*
more pictures
Compare

10" x 54" Used Acra Variable Speed Heavy Duty Vertical Milling Machine, Mdl. 1054, Brand New Powered Table Feed, Bijur Lubrication System, Box Ways, Box Ways, #A3940

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
1054
Capacity: 10" x 54"
Stock: #A3940
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: Used Machinery
Table Size: 10" x 54"
Longitudinal Travel: 37"
Speed Selector: Belt Change Pulley
Saddle Travel: 14.5"
Ram Travel: 16"
Quill Travel: 5"
Knee Travel: 14"
Spindle taper: R-8
Quill Feed Speeds: 0.0015" x 0.003" x 0.006"
Horsepower: 3 H.P.
Voltage: 220/440v, 3 Phase
Dimensions (L x W x H): 69" x 76" x 84"
Weight: 2,750 Lbs.
$6,500
Finance As Low As
$133.06 Per Mo.*
more pictures
Compare

12" x 54" New Acra Milling Machine With Inverter Head Speed Control, Mdl. AM3VVAC, Hardened & Ground Table & Ways, Double Wall Construction, Turcite On The Table X & Y Axis, Quill Heat Treat Hardened & Chromed, #SMAM3VVAC

>> View Complete Specs

Acra Milling Machines

Manufacturer: Acra
Model:
AM3VVAC
Capacity: 12" x 54"
Stock: #SMAM3VVAC
Category: Milling Machines
Subcategory: Vertical (Bridgeport Type)
Condition: New Machinery
Table Size: 12" x 54"
Speed Selector: Variable Speed
Spindle Speed: 50 - 5,000 RPM
Spindle: R-8 or #30 Taper
Axis Travel X, Y And X: 37", 17", 16"
Equipped With:
Digital Readout: No
Power Draw Bar: No
Table Feed: No
Horsepower: 3 H.P.
Voltage: 220V ~ Single or Three Phase
Dimensions (W x L x H): 6' x 6' x 6'
Weight: 2,900 Lbs.
Register to Discount
Starting At $9,250
Finance As Low As
$189.35 Per Mo.*
more pictures
Compare

16" x 32" Brand New Acra Fully Automatic Surface Grinder, Mdl. 1632HS, Grinding Wheel, Diamond Wheel Dresser, Wheel Balancing Stand, Wheel Balancing Arbor, Wheel Flange, Leveling Screws & Plates, Flange Extractor, Halogen Light, Made In Taiwan, #SM1632HS

>> View Complete Specs

Acra Grinders

Manufacturer: Acra
Model:
1632HS
Capacity: 16" x 32"
Stock: #SM1632HS
Category: Grinders
Subcategory: Surface, Reciprocating (Horizontal Spindle), N/C & CNC
Condition: New Machinery
Table Work Surface: 16" x 32"
Table Load Capacity: 880 Lbs.
Table Guideway: F-V
Max. Table Travel: 18" x 35"
Table Speed: 16'~82'
Grinding Wheel: 16" x 2" x 5"
Center Height: 25"
Wheel RPM: 1750
Operation: 2 Axis Automatic
Horsepower: 7-1/2 H.P.
Voltage: 220/440V AC/3PH
Dimensions (L x W x H): 110" x 92" x 90"
Weight: 7,700 Lbs.
Register to Discount
Starting At $30,000
Finance As Low As
$614.10 Per Mo.*
more pictures
Compare

32"/44" x 80" Brand New Acra Precision Engine Lathe, Mdl. SET3280, 20"- 3 Jaw Chuck, Full Length Rear Splash Guard, Coolant System, 4 Way Tool Post, Halogen Work Light, Steady & Follow Rest, 4 Way Rapid Traverse, Thread Chasing Dial, Auto Lube System, Tool Box w/Tools, #SMSET3280

>> View Complete Specs

Acra Lathes

Manufacturer: Acra
Model:
SET3280
Capacity: 32"/44" x 80"
Stock: #SMSET3280
Category: Lathes
Subcategory: Engine
Condition: New Machinery
Capacity: 32"/44" x 80"
Swing Over Bed: 32"
Swing Over Cross Slide: 23"
Swing In Gap: 44"
Distance Between Centers: 80"
Bed Width: 18"
Spindle Nose: A2-11
Spindle Bore: 6"
Taper of Spindle: MT #5
Spindle Speeds - Range: 15 ~ 1000 RPM
Spindle Drive Motor: 25 H.P.
Voltage: 220/440V ~ 3 Phase
Dimensions (LxWxH): 15' x 6' x 6'
Weight: 13,000 Lbs.
Register to Discount
Starting At $52,000
Finance As Low As
$1,064.44 Per Mo.*
more pictures
Compare

20" Brand New Acra RF Heavy Duty Geared Head Floor Type Drill Press With Powered Down Feed, Mdl. 46 SF, Coolant System, Powered Down Feed, Made In Taiwan, #SM46SF

>> View Complete Specs

Acra Drills

Manufacturer: Acra
Model:
46 SF
Capacity: 20"
Stock: #SM46SF
Category: Drills
Subcategory: Floor Type (Heavy Duty)
Condition: New Machinery
Drilling Capacity (Mild Steel): 1-1/4"
Column Diameter: 4-1/2"
Spindle Taper: MT #4
Spindle Stroke: 5-1/8"
Swing: 20-1/2"
Spindle RPM: 60 - 1,500 RPM
Work Table Space: 21-1/4" x 18-1/2"
Horsepower: 1-1/2 H.P.
Voltage: 110/220V AC, 1 Phase
Weight: 740 Lbs.
Dimensions (L x D x H): 36" x 30" x 82"