Phone:626-444-0311
Sterling Machinery Exchange
91733
9310 Garvey Ave.
South El Monte,CA
CA
www.sterlingmachinery.com
Price: $26,500.00
FOR SALE:
18" x 59" Brand New Atrump High Speed Precision Engine Lathe, Mdl. KC-1860, One Piece Stand, Rigid Construction Bed is Induction Hardened Over HRC50 and with Precision Ground, Apron Lead Screw/Feed Rod Reverse, Headstock Gears and Spline Shafts are Hardened and Ground for High Speed Running at Low Noise, Precision Taper Roller Bearings, Turcite-B Carriage and Cross Slide Ways, Double Independent Control of Longitudinal and Cross Feeds, Universal Gearbox Design allows Easy Selection of Inch/Metric Threading, Full Length Foot Brake, Full Length Splash Guard, Low Voltage Controls, Motor & Electrics Control System, Coolant System, One Shot Lube System, 1 Back Plate for 3 Jaw Chuck, 4 Way Tool Post, Threads Indicator, Feed Rod is Equipped with Over Load Safety Clutch, Center & Center Sleeve, Full Length Splash Guard, Halogen Lamp, Foot Brake, Leveling Block, Tool Box W/Tools, Operation Manual, #SMKC1860
Details
Stock No: #SMKC1860
Category/Subcategory: Lathes,Engine,Precision,Welders,Spot (Rocker Arm & Press Type)
Manufacturer: Atrump
Model: KC-1860
Capacity: 18" x 59"
Full Description
Capacity:
Height of Centers:8.85"
Swing Over Bed:18.11"
Swing Over Cross Slide:11"
Swing in Gap:25.59"
Distance Between Center:59.05"
Width Of Bed:14"
Saddle:
Longitudinal Travel (Z):59.05"
Cross Slide Travel (X):8.66"
Compound Rest Travel:4.72"
Headstock:
Spindle Nose:D1-6
Spindle Bore:2.20" Diameter
Taper of Spindle (Nose & Center):MT #6 x #4 for D1-6, MT #7 x #5 for D1-8
Spindle Speeds:25-1550 rpm (3.34" Diameter), 23-1300 rpm (4.13" Diameter), 15-830 rpm (6.1" Diameter)
Tailstock:
Tailstock Quick Travel:5.9"
Tailstock Quill Diameter:2.04"
Tailstock Quil Taper:MT #5
Threading:
Lead Screw:4 TPI or .25"/pitch
Pitch Threads - Inch:4 - 56 TPI (36 Kinds)
Pitch Threads - Metric:0.5 - 7mm/pitch (24 Kinds)
Pitch Threads - Module:0.25 - 3.5 M (16 Kinds)
DP Threads:8 - 112 P (36 Kinds)
Feeding Range:
Range of longitudinal feeds:0.002" - 0.35"/rev.
Range of Crossfeeds:0.001" - 0.017"/rev.
Motor:
Spindle Drive Motor:7.5 H.P.
Coolant Pump Motor:1/8 H.P.
WEIGHT:5512 lbs
Warranty:One Year Limited Warranty
Equipped With
One Piece Stand
Rigid Construction Bed Is Induction Hardened Over HRC50 And With Precision Ground
Apron Lead Screw/Feed Rod Reverse
Headstock Gears And Spline Shafts Are Hardened And Ground For High Speed Running At Low Noise
4 Way Tool Post
Turcite-B Carriage And Cross Slide Ways
Double Independent Control Of Longitudinal And Cross Feeds
Universal Gearbox Design Allows Easy Selection Of Inch/Metric Threading
Full Length Foot Brake
Halogen Lamp
Low Voltage Controls
Motor & Electrics Control System
1 Back Plate For 3 Jaw Chuck
Tool Box W/Tools
Center & Center Sleeve
Leveling Block