Phone:626-444-0311
Sterling Machinery Exchange
91733
9310 Garvey Ave.
South El Monte,CA
CA
www.sterlingmachinery.com
Price: Call For Price
FOR SALE:
90 Tons scotchman 9012-24M, Used #A3377
Details
Stock No: #A3377
Category/Subcategory: Ironworkers
Manufacturer: Scotchman
Model: 9012-24M
Capacity: 90 Tons
Full Description
Punching Capacity:90 Ton
:1 - 1/8"
Special Tooling:4" Max. Dia.
Throat Depth:12"
Flat Bar Shear:24" Length
:1" x 8"
:3/4" x 12"
:1/2" x 16"
:1/4" x 24"
Opt. Sabre Blade:1/2" x 22"
:38" x 24"
Angle Shear 90 Degrees:6" x 6" x 1/2"
Angle Shear 45 Degrees (With Bar Shear):3" x 3" x 3/8"
:4" x 4" x 1/2"
Brake 12":50 Ton
Brake 24":40 Ton
Open End Brake:Max. 1/4" x 6"
:Flat Or Angle Iron
Pipe Notcher:3/4", 1"
Schedule 40:1 - 1/4"
:1 - 1/2", 2
Rectangle Notcher:2" x 2 - 1/2" 3/8"
90 Degrees V. Notcher:6" x 6" x 5/16"
Channel Shear:2" To 6" Adj.
Rod Shear:
Round Rod (Max.):1/4" To 1 - 1/4", 9 Cavity
Square Rod (Max.):1/4" To 1", 1 Cavity
Square Tubes Shear:1/2" To 2", 12 Gauge
Picket Tool:1/2", 3/4" & 1"
:16 Gauge
Offset Die Holder:Max. 40 Ton
Strokes Per Minute In Light Material:37 SPM
Strokes Per Minute In Heavy Material:24 SPM
Hydraulics:2,600 PSI
Motor Standard:5 HP 3PH
:230/240
:208/380/575
Motor Optional:5 HP 1 PH
:230 V
Optional Equipment Available: 9012-24M (Less Angle Shear):
Optional UL Approval:5710
Nema 12 Fusible Disconnect:
Single Phase Motor, 5 HP 220 Volt/60 HZ:6915
Work Light (Factory Installation):90392
Work LIght (When Ordered Separately-Includes Transformer):90395
36" Punch Gauging Extension (Left Hand Multi-Loc):29291
:Includes Three Vertical Stop
:Blocks Material Thickness 16
:Gauge To 3/4"
36" Punch Gauge Extension (Right Hand Multi-Loc):29291
:Includes Three Vertical Stop
:Blocks Material Thickness 16
:Gauge To 3/4"
85" Punch Gauging Extension (Left Hand Multi-Loc):29292
:Includes Six Vertical Stop
:Blocks Material Thickness 16
:Gauge To 3/4"
85" Punch Gauging Extension (Right Hand Multi-Loc):29293
:Includes Six Vertical Stop
:Blocks Material Thickness 16
:Gauge To 3/4"
Punch Slug Receptacle:341150
Tool Table Extension W/Punch & Die Storage Rack:26695
48" Deluxe Back Gauge:25603
48" Electric Back Gauge:26600
Throat:32"
12" Brake W/2" V Opening Dies STD.- For 1/4" Material:026300-016211
24" Brake W/2" V Opening Dies STD.- For 1/4" Material:026303-016211
12" Brake Table W/Scale & Squaring Arm:26865
24" Brake Table W/Scale & Squaring Arm:26880
Brake Length Gauge W/Scale:26800
Open End Brake (Maximum 1/4" x 6" Flat Or 1/4" x 6" Angle Iron):001360-001385
Optional Brake Dies Available 1" To 4" V Opening:
Pipe Notcher Housing (Separate Dies Required For Each Size):1195
3/4" Schedule 40 Pipe Upper & Lower Dies:1220
1" Schedule 40 Pipe Upper & Lower Dies:1222
1-1/4" Schedule 40 Pipe Upper & Lower Dies:1224
1-1/2" Schedule 40 Pipe Upper & Lower Dies:1226
2" Schedule 40 Pipe Upper & Lower Dies:1228
Punch Pusher For Pipe Notcher:1205
Tool Table Pusher For Pipe Notcher:1207
Rectangle Notcher 2 x 2-1/2 x 3/8":26000
90 Degree V Notcher 6 x 6 x 5/16":16610
Channel Shear (2" To 6" Adjustable):026372-016576
Rod Shear (Up To 1" Square Or 1-1/4" Round):026774-016247
Square Tube Shear (1/2" To 2" 14 Gauge Max.):026350-016590
Picket Tool Housing (Separate Dies Required For Each Size):001293-016550
* Mounts In The Punch Station Only:
1/2" 14 Gauge Max. Upper & Lower Dies:001150-001249
3/4" 14 Gauge Max. Upper & Lower Dies:001190-001292
1" 14 Gauge Max. Upper & Lower Dies:001162-001264
#45 Retaining Nut (Punching From 1-9/32" To 1-9/16"):16096
Heavy Duty Retaining Nut (Punching From 1-19/32" To 4"):26500
Wrench For Heavy Duty Retaining Nut:18507
Die Insert For 2-1/2" O.D. Dies:6252
Die Insert For 3" O.D. Dies:6302
Die Holder For 6" x 6" Dies:28300
Offset Die Holder (For Flange Punching-2" O.D. Dies Only- Max. 40 Ton):13186
Stripper For Sffset Die Holder (Includes Guard):12127
Urethane Stripper Assembly:26060
Note: The Urethane Stripper Works With the #40 Tooling Only- Maximum:
Diameter 1-1/4". The Urethane Stripper Will NOT Work With The:
Offset Die Holder:
Unequal Leg Angle Shear Blades::
66 Degree (4" x 3-1/2" x 3", 3" x 2-1/2"):16238
70 Degree (4" x 3", 2-1/2" x 2", 2" x 1-1/2"):16239
74 Degree (6" x 4", 5" x 3-1/2", 3" x 2"):16240
80 Degree (6" x 3-1/2", 5" x 3"):16241
Upper Angle Blade Quick Change Hardware:26708
Angle Shear 6 x 6 x 1/2" Or 5 x 5 x 1/2" (When Ordered Separate):26727
Hydraulic Bar Shear Hold Down:17580
Note: Must Be Factory Installed:
Economy Fabricatin Packages::
#2545 Includes::
#40 & #82 Rounds Punch & Die Package:
Rounds:11/32, 15/32, 17/32, 19/32,
:21/32, 23/32, 25/32,27/32,
:29/32, 31/32, 1-1/32 & 1-3/16
#2855 Includes::
Delux #40 & #82 Punch & Die Package:
Rounds:1/4, 9/32, 5/16, 3/8, 13/32,
:7/16, 1/2, 9/16, 5/8, 11/16,
:3/4, 13/16, 7/8, 15/16, 1", 1-
:1/16, 1-1/8, 1-3/16 & 1-1/4
Squares:1/2, 3/4, & 7/8
Ovals:9/32 x 3/4, 5/16 x 3/4, 9/32 x
:1, 5/16 x 1, 13/32 x 1, 7/16 x
:1, 17/32 x 1, 9/16 x 1, 9/16 x
:1-1/4, 11/16 x 1-1/4 & 13/16 x
:1-1/4
#2755 Includes::12" Brake, Brake Table W/Scale
:& Squaring Arm, Brake Length
:Gauge W/Scale, Work Light,
:Punch Slug Receptacle, 48"
:Back Gauge & Tool Table
:Extension
#2757 Includes::24" Brake, Brake Table W/Scale
:& Squaring Arm, Brake Length
:Gauge W/Scale, Work Light,
:Punch Slug Receptacle, 48"
:Back Gauge & Tool Table
:Extension
Type:Hydraulic
Dimensions:76" x 26" x 70"
WEIGHT:3900 LBS.
Equipped With
Rod Shear
24" Flat Shear
Punch Station
3 Year Manufacturers Warranty!