|
 | 
|
Machinery and Equipment For Sale
Ironworkers (14)
|
|
|
30 Ton Used Amada Hydraulic Turret Punch, Mdl. IW-304,5 Punching Dies, Pwr. Turret#6684
| Manufacturer: |
Amada |
| Model: |
IW-304 |
| Capacity: |
30 Ton |
| Stock: |
#6684 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Tonnage: |
30 |
| Ram Stroke: |
1" |
| Strokes Per Minute: |
30 |
| Open Height: |
11" |
| Shut Height: |
8.375" |
| Die Height: |
3 1/2" |
| Gauging Table: X-Axis: |
84" |
| Y-Axis: |
12" |
| Weight: |
6,800 LBS |
>> View Complete Specs
Amada Ironworkers
|
|
|
45 Ton Brand New Scotchman Ironworker, Mdl. Porta Fab 45, 45 - Ton Punch Station (1 - 1/8" In 1/2"), Keyed Punch Ram For Safety, 4 - 1/4" Throat Depth, 2" Die Holders, One Round Punch & Die: Max. Diameter 1", Adjustable Electric Stroke Control With Scale, Three - In - One Combination Tool, #A2737
| Manufacturer: |
Scotchman |
| Model: |
Porta Fab 45 |
| Capacity: |
45 Ton |
| Stock: |
#A2737 |
| Category: |
Ironworkers |
| Condition: |
New Machinery |
| Tonnage: |
45 Ton |
| Punching Capacity: |
1-1/2" x 3/8" |
| Special Tooling: |
2 - 1/4" Max. Dia. |
| Throat Depth: |
4 - 1/2" |
| Flat Bar Shear: |
6" Length |
| |
1/2 " x 4" |
| |
3/8" x 6" |
| Angle Shear 90 Degrees: |
3" x 3" x 5/16" |
| Angle Shear 45°
: |
2" x 2" x 1/4" |
| Round Rod (Max.): |
1/4" To 1", 5 Cavity |
| Strokes Per Minute In Light Material: |
20 SPM |
| Strokes Per Minute In Heavy Material: |
6 SPM |
| Hydraulics: |
2,500 PSI |
| Dimensions (L x W x H): |
36" x 18" x 39" |
| Weight: |
640 LBS. |
>> View Complete Specs
Scotchman Ironworkers
|
|
|
50 Ton Brand New Scotchman Ironworker With Built In Notcher, Mdl. 50514 - CM, Keyed Punch Ram For Safety, Rectangle Notcher, Punch Nut With Wrench & Stripper, Adjustable Stroke Control, Tool Table Work Area, One Punch And Die Set Included, Angle Shear, Flat Bar Shear, Punching Station, #A2734
| Manufacturer: |
Scotchman |
| Model: |
50514 - CM |
| Capacity: |
50 Ton |
| Stock: |
#A2734 |
| Category: |
Ironworkers |
| Condition: |
New Machinery |
| Tonnage: |
50 Ton |
| Punching Capacity: |
1 1/4" IN 1/2" |
| Throat Depth: |
6" |
| Angle Shear Capacity At 45º: |
2" x 2" x 3/8" |
| Angle Shear Capacity At 90º: |
4" x 4" x 3/8" |
| Flat Bar Shear Capacities: |
| |
1/4" x 14" |
| |
3/8" x 10" |
| |
1/2" x 8" |
| |
3/4" x 4" |
| Rectangle Notcher: |
2 - 1/2" x 3" x 5/16" |
| Hydraulics: |
2100 psi |
| Horsepower: |
3 H.P. |
| Voltage: |
220v, 3 Phase |
| Dimensions (WxLxH): |
29" x 47" x 59" |
| Weight: |
1,275 Lbs |
>> View Complete Specs
Scotchman Ironworkers
|
|
|
55 Ton Used Mubea Mechanical Ironworker, Mdl. KBL-1/2, 5 Stations, One Shot Lube System, Tooling, #A2279
| Manufacturer: |
Mubea |
| Model: |
KBL-1/2 |
| Capacity: |
55 Ton |
| Stock: |
#A2279 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Capacity: |
55 Ton |
| Channels: |
7" x 2 3/16" |
| Hole: |
1" Through 7/16" |
| 45 Degrees: |
3 1/2" x 3/8" |
| Angle Shear: Square: |
4" x 1/2" |
| Throat: |
15 3/4" |
| |
3/4" Through 1/2" |
| Flat Bars: |
6" x 5/8" |
| Coper- Notcher: Plates: |
7/16" |
| Punch Capacity: Tonnage: |
55 Ton |
| Bar Shear: Round: |
1 5/8" |
| Angles: |
3" x 3/8" |
| Channels: |
4" x 1 3/4" |
| Plate Shear: Slitting: |
1/2" |
| Square: |
1 1/2" |
| Dimensions (L x W x H): |
78" x 44" x 89" |
| Weight: |
6,000 Lbs |
| Horsepower: |
3 H.P. |
>> View Complete Specs
Mubea Ironworkers
|
|
|
58 Ton Used Hill Acme Hydraulic Ironworker, Mdl. #4, Punches & Dies, Punch, 12" Shear, 2 3/4" x 2 3/4" x 3/8" Coper, 4" x 4" x 1/2" Angle #9754
| Manufacturer: |
Hill Acme |
| Model: |
#4 |
| Capacity: |
58 Ton |
| Stock: |
#9754 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Tonnage: |
58 |
| Punching Capacity: |
| Diameter Thru Thickness: |
1 1/16" Thru 5/8" |
| |
7/8" Thru 3/4" |
| Throat: |
20" |
| Stroke: |
1 1/2" |
| Strokes Per Minute @ 1/2" Stroke: |
60 |
| @ 1 1/2" Stroke: |
30 |
| Plate Shear Capacity: |
| Blade Length: |
12" |
| Flat Blade: |
5/8" x 7" |
| |
1/2" x 8" |
| |
3/8" x 8 1/2" |
| Shear Capacity: |
| Rounds: |
1 3/4" |
| Square: |
1 1/2" |
| Angles: |
4" x 4" x 1/2" |
| Coping Capacity: |
| Square Notch: |
2 3/4" x 2 3/4" x 3/8" |
| Dimensions (W x D x H): |
39" x 70" x 77" |
| Weight: |
6,500 Lbs. |
>> View Complete Specs
Hill Acme Ironworkers
|
|
|
65 Ton Brand New Scotchman Ironworker, Mdl. 6509 - 24 M, 65 - Ton Punch Station (1 - 1/16" In 3/4"), Keyed Punch Ram For Safety, Angle Shear, 9" Throat Depth, Punch Gauging Table With Fence And Scale, Die Holder Complete With 2" Die Insert, Punch Nut With Wrench And Stripper, One Round Punch & Die: Maximum Diameter 1 - 1/, #A2130
| Manufacturer: |
Scotchman |
| Model: |
6509 - 24 M |
| Capacity: |
65 Ton |
| Stock: |
#A2130 |
| Category: |
Ironworkers |
| Condition: |
New Machinery |
| Punching Capacity: |
65 Ton |
| Diameter Thru Thickness: |
1 1/16" Thru 3/4" |
| Throat Depth: |
9" |
| Special Tooling: |
4" Max. Dia. |
| 90 Degrees: |
6" x 6" x 3/8" |
| Blade Length: |
24" |
| Flat Bar Shear: |
24" Length |
| Flat Bar: |
1" x 6" |
| |
3/4" x 10" |
| |
1/2" x 12" |
| |
1/4" x 24" |
| Plate Shear Capacity: |
3/16" x 24" |
| Strokes Per Minute: |
40 |
| Stroke: |
3 1/2" |
| Angel Shear Capacity: |
| 45 Degrees: |
4" x 4" x 1/2" |
| 45 Degrees: |
3" x 3" x 3/8" |
| Horsepower: |
5 |
| Dimensions (L x D x H): |
60" x 24" x 66" |
| Weight: |
2,750 Lbs |
>> View Complete Specs
Scotchman Ironworkers
|
|
|
65 Ton Used Buffalo DUAL OPERATION Universal Metalworking Ironworker, Mdl. 1-1/2, Tooling, 24" THROAT, Foot Treadle, Hand Lever Controls, #A2346
| Manufacturer: |
Buffalo |
| Model: |
1-1/2 |
| Capacity: |
65 Ton |
| Stock: |
#A2346 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Tonnage: |
65 Ton |
| Punch Capacity: |
1-1/6" Diameter Thru 3/4" Or 7/8" Diameter Thru 7/8" Mild Steel |
| Throat: |
24" |
| Shear Capacity:: |
3/4" x 6" or 5/8" x 10" |
| Angle Shear: |
5" X 5" X 1/2" at 90 Degrees |
| Angle Shear: |
4" x 4" x 3/8" |
| Rounds: |
1 7/8" |
| Squares: |
1 3/4" |
| Coper Notcher: |
2" x 3" x 1/2" |
| Dimensions (L x D x H): |
77" x 55" x 88" |
| Weight: |
6,000 Lbs. |
| Horsepower: |
5 H.P. |
>> View Complete Specs
Buffalo Ironworkers
|
|
|
70 Ton Used Iron Crafter Hydraulic Ironworker, Mdl. 70-70, 9" Plate Shear, 4" x 4" x 1'2" Angle Shear, Round Bar Shear, Corner Notcher, Note: This machine does not have a punching head #A1737 **LOCATED IN ROSEMEAD, CA**
| Manufacturer: |
Iron Crafter |
| Model: |
70-70 |
| Capacity: |
70 Ton |
| Stock: |
#A1737 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Capacity: |
70 Tons |
| Plate Shear: |
9'' |
| Angle Shear: |
4'' x 4'' x 1/2'' |
| Round Bar Shear: |
1'', 1 1/4'', 1 1/2'', 2'' |
| Corner Notcher: |
6'' |
| Dimensions W x D x H: |
7'' x 4'' x 8'' |
| Weight: |
3000 LBS |
>> View Complete Specs
Iron Crafter Ironworkers
|
|
|
75 Ton Used Hill Acme Hydraulic Ironworker (Dual Operator), Mdl. #5, Punches & Dies, 2- Electric Foot Pedal, #A2344
| Manufacturer: |
Hill Acme |
| Model: |
#5 |
| Capacity: |
75 Ton |
| Stock: |
#A2344 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Tonnage: |
75 |
| Punching Capacity: |
| Diameter Thru Thickness: |
1 1/4" Thru 11/16" |
| |
1" Thru 7/8" |
| Throat: |
20" |
| Stroke: |
1 1/2" |
| Strokes Per Minute @ 1/2" Stroke: |
40 |
| @ 1 1/2" Stroke: |
20 |
| Plate Shear Capacity: |
| Blade Length: |
12" |
| Flat Bar: |
1" x 4" |
| |
3/4" x 6" |
| |
5/8" x 10" |
| Shear Capacity: |
| Rounds: |
1 7/8" |
| Squares: |
1 3/4" |
| Angles: |
5" x 5" x 1/2" |
| Coping Capacity: |
| Square Notch: |
3" x 3" x 1/2" |
| Dimensions (L x W x H): |
72" x 39" x 82" |
| Weight: |
7,600 Lbs. |
>> View Complete Specs
Hill Acme Ironworkers
|
|
|
86 Tons Used Metal Muncher Multi-Station Ironworker, Mdl. MM90C-18, Punches And Dies, 3/16" x 22" Flat Shear, 3" x 1/2" Coper, 1-1/16" thru 1" Punch Capacity #A2387
| Manufacturer: |
Metal Muncher |
| Model: |
MM90C-18 |
| Capacity: |
86 Tons |
| Stock: |
#A2387 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Punch Capacity: |
1-1/16 Dia. x 1" |
| Flat Bar Shear: |
3/16" x 22", 3/8" x 15" |
| |
1/2" x 12" |
| Square: |
1-1/4" |
| Round: |
1-3/8" |
| Angle: |
4" x 4" x 3/8", 3" x 3" x 1/2" |
| Coper Notcher: |
3" x 3" x 1/2" |
| Horsepower: |
7-1/2 H.P. |
| Dimensions (L x D x H): |
48" x 72" x 72" |
| Weight: |
4,000 Lbs. |
>> View Complete Specs
Metal Muncher Ironworkers
|
|
|
90 Ton Used Scotchman Hydraulic Ironworker, Mdl. 9012 - 24 M, 6" x 6" Angle Shear Attachment, Foot Control, Punch Head, #A2697
| Manufacturer: |
Scotchman |
| Model: |
9012 - 24 M |
| Capacity: |
90 Ton |
| Stock: |
#A2697 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Punching Capacity: |
90 Ton |
| |
1 - 1/8" |
| Special Tooling: |
4" Max. Dia. |
| Throat Depth: |
12" |
| Flat Bar Shear: |
24" Length |
| |
1" x 8" |
| |
3/4" x 12" |
| |
1/2" x 16" |
| |
1/4" x 24" |
| Angle Shear 90 Degrees: |
6" x 6" x 1/2" |
| Angle Shear 45 Degrees (With Bar Shear): |
3" x 3" x 3/8" |
| |
4" x 4" x 1/2" |
| Brake 12": |
50 Ton |
| Brake 24": |
40 Ton |
| Open End Brake: |
Max. 1/4" x 6" |
| |
Flat Or Angle Iron |
| Pipe Notcher: |
3/4", 1" |
| Schedule 40: |
1 - 1/4" |
| |
1 - 1/2", 2 |
| Rectangle Notcher: |
2" x 2 - 1/2" 3/8" |
| 90 Degrees V. Notcher: |
6" x 6" x 5/16" |
| Channel Shear: |
2" To 6" Adj. |
| Rod Shear |
| Round Rod (Max.): |
1/4" To 1 - 1/4", 9 Cavity |
| Square Rod (Max.): |
1/4" To 1", 1 Cavity |
| Square Tubes Shear: |
1/2" To 2", 12 Gauge |
| Picket Tool: |
1/2", 3/4" & 1" |
| |
16 Gauge |
| Offset Die Holder: |
Max. 40 Ton |
| Strokes Per Minute In Light Material: |
37 SPM |
| Strokes Per Minute In Heavy Material: |
24 SPM |
| Hydraulics: |
2,600 PSI |
| Motor Standard: |
5 HP 3PH |
| |
230/240 |
| Dimensions: |
W - 26" |
| |
L - 76" |
| |
H - 70" |
| Weight: |
3900 LBS. |
>> View Complete Specs
Scotchman Ironworkers
|
|
|
100 Ton Used Kingsland Mechanical Heavy Duty Muiti Station Ironworker, Mdl. J25, Type XA, Foot Pedal, Hand Lever Controls, One Shot Lube System, Flat Bar Shearing Station, Channel Shear, Square and Round Bar Shear, Angle Shear, Punch, V Notcher, Rectangular Notcher, #A2467 *Located Rosemead, Ca*
| Manufacturer: |
Kingsland |
| Model: |
J25, Type XA |
| Capacity: |
100 Ton |
| Stock: |
#A2467 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Tonnage: |
100 Ton |
| Punching Capacity |
| Diameter Thru Thickness: |
1-1/8" Thru 1" or 1-1/2" Thru 3/4" |
| Plate Shear Capacity:: |
12" x 1/2" Plate or 7" x 1" Plate |
| Blade Length: |
14" |
| Shear Capacity: |
| Rounds: |
2" |
| Squares: |
1 1/4" |
| Angle Cropping: |
90° 6" x 6" x 5/8" or 45° 4" x 4" x 1/2" |
| Tee Shear: |
4" x 8" |
| Channel Shear: |
8" x 3 1/2" |
| Joist Shear: |
8" x 4" |
| Angle Shear: |
8" x 4" |
| Rectangle Notcher: |
3" x 3 3/4" x 1/2" |
| V - Notch: |
7 1/2" x 3 3/4" x 1/2" |
| Motor: |
5.5Kw |
| Dimensions (L x W x H): |
93" x 39" x 96" |
>> View Complete Specs
Kingsland Ironworkers
|
|
|
100 Ton Used Scotchman Dual Operation Ironworker , Mdl. DO-100-24, Dual Operator Allows For Two Operators To Work At The Same Time At Full Capacity, Shearing Gauge Table, Emergency Stop, (2) Foot Pedals, Angle Shear, Press Brake Attachment, Square Notcher, #A2725
| Manufacturer: |
Scotchman |
| Model: |
DO-100-24 |
| Capacity: |
100 Ton |
| Stock: |
#A2725 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Punch: |
1-1/4" x 1" Material |
| Shear Capacity: |
| |
1" x 8" |
| |
3/4" x 10" |
| |
1/2" x 18" |
| |
3/8" x 24" |
| Angel Shear Capacity:: |
6" x 6" x 1/2" |
| Rod Shear: |
| |
1-1/4" Round |
| |
1" Square |
| Brake Capacity:: |
24" x 1/4" @ 45 Tons |
| Rectangle Notcher: |
3" x 5" x 1/2" |
| Horsepower: |
5 H.P. |
| Voltage: |
230v, 3 Phase |
| Dimensions (L x W x H): |
74" x 48" x 68" |
| Weight: |
4,800 Lbs. |
>> View Complete Specs
Scotchman Ironworkers
|
|
|
130 Ton Used Spartan/Marvel Hydraulic Dual Operation Multi-Station Ironworker, Mdl. IW130D Spartan, Punches And Dies, Dual Operator Allows For Two Operators To Work At The Same Time At Full Capacity, 2- Electric Foot Pedals, 24" Flat Shear, Rectangular Notcher, Bar Shear, Punch Station, Angle Shear, #A2696
| Manufacturer: |
Marvel |
| Model: |
IW130D Spartan |
| Capacity: |
130 Ton |
| Stock: |
#A2696 |
| Category: |
Ironworkers |
| Condition: |
Used Machinery |
| Capacity: |
130 Ton |
| Punch: Hole Capacity: |
1-1/2" in 7/8", 2" in 11/16" |
| Throat Depth: |
12" |
| Stroke Length Punch: |
4" |
| Strokes Per Minute: |
28 |
| Flat Bar Shear: |
24" in 11/16" |
| Round Bar Shear: |
2" |
| Square Bar Shear (Solid): |
2" x 2" |
| Angle Shear 45 Degrees: |
3-1/8" x 3-1/8" in 3/8" |
| Angle Shear 90 Degrees: |
6" x 6" in 11/16" |
| Rectangle Notcher: |
2-1/2" x 3-1/2" in 1/2" |
| Horsepower: |
15 H.P. |
| Dimensions (L x D x H): |
86" x 35" x 73" |
| Weight: |
7,400 LBS |
>> View Complete Specs
Marvel Ironworkers
|
|
|
|
