Last Updated :Fri, Sep 22, 2017

  • Facebook
  • Pintrest
  • Youtube
  • Google Plus
  • Twitter
  • Instagram
16" x 100" Brand New Standard Modern Engine Lathe, Mdl. 16100, 10 H.P. Continuous Duty, 100" Between Centers, D1-6" Camlock - 3 Bearing Spindle, 18 Spindle Speeds 40 to 2000 RPM, Electric Brake - Self Actuating, All Hardened & Ground Gears - No Clutches, Direct Reading Speed Dial, Deep Bed Design, Super Stiff Bed - Ready for Future Tools, Full Length Rear Splash Guard, Hardened Quill with Tang Drive, Convenient Hi-Lo Neutral Shifter, Complete Range of Inch-Metric Threads (Switchable), No Transposing Gears, Feed Reverse & Lead Screw Reverse, Chip Clean Out - Front & Rear, Bi-Direction Auto Carriage Stop (Feeds & Threads), Combination Inch-Metric Dials, Nitrided Screw - Anti-Backlash Nuts, Standard 115V Electric Controls, Operation Manual, MADE IN NORTH AMERICA, #SM16100

Brand New Standard Modern Engine Lathe

Racer Machinery International Inc.
Stock No: #SM16100
Manufacturer: Racer Machinery International Inc.
Model: 16100
Capacity: 16" x 100"
Condition: New Machinery
Starting At:
$29,000.00
FINANCING STARTING AT $594.79 *APPLY NOW*
DETAILED SPECIFICATION
Overall Capacity16" x 100"
.
Swing Over Bed & Saddle17"
Swing Over Cross Slide10"
Distance Between Centers100"
Bar Capacity2"
Headstock
Spindle Speeds18
Speed Range40 - 2000 RPM
Spindle Nose - CamlockD1-6"
Spindle Hole2.06"
Spindle Center#4 MT
Feedbox
Feed & Thread Selections66
Inch Feed Range0.0015" - 0.105" /rev.
Inch Thread Range2 to 127 TPI
Metric Feed Range0.04mm - 2.67mm /rev.
Metric Thread Range0.2mm to 14mm
Tailstock
Quill Diameter2.44"
Quill Travel5"
Morse Taper with Tang#4 MT
Off Set+/- 0.75"
Carriage Cross Slide
Carriage Length on Bed 18.25"
Carriage Bridge Width8.5"
Cross Slide Length20"
Cross Slide Travel8.5"
Compound Travel3.8"
Direct Reading Dial Graduation0.001"
Bed & Base
Bed Width11"
Bed Depth15"
Bed Length96"
Base Width31"
Base Length104"
Apron
Hand Wheel - 1 Revolution1"
Half NutsDouble
High Speed Threading to 800 RPM
Repeatability of Auto Carriage Stop+/- 0.005"
Feed Torque Control Variable
Warranty2 Year Limited Warranty
Horsepower10 H.P.
Voltage208/230/460/575V ~ 3 Phase
Dimensions (L x W x H)148" x 36" x 60"
Weight3850 lbs
EQUIPPED WITH
100" Between Centers
10 H.P. Continuous Duty
D1-6" Camlock - 3 Bearing Spindle
18 Spindle Speeds 40 to 2000 RPM
Electric Brake - Self Actuating
All Hardened & Ground Gears - No Clutches
Direct Reading Speed Dial
Deep Bed Design
Super Stiff Bed - Ready for Future Tools
Full Length Rear Splash Guard
Hardened Quill with Tang Drive
Convenient Hi-Lo Neutral Shifter
Complete Range of Inch-Metric Threads (Switchable)
No Transposing Gears
Feed Reverse & Lead Screw Reverse
Chip Clean Out - Front & Rear
Bi-Direction Auto Carriage Stop (Feeds & Threads)
Combination Inch-Metric Dials
Nitrided Screw - Anti-Backlash Nuts
Standard 115V Electric Controls
Operation Manual
MADE IN NORTH AMERICA
OPTIONAL EQUIPMENT AND TOOLING
Racer - 10" 3-Jaw D1-6 (pricing starting from...)
Name:Racer - 10" 3-Jaw D1-6 (pricing starting from...)
Price: $1,420.00
Stock No:Racer12
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - 10" 4-Jaw D1-6 (pricing starting from...)
Name:Racer - 10" 4-Jaw D1-6 (pricing starting from...)
Price: $1,050.00
Stock No:Racer14
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - 12" 3-Jaw D1-6 (pricing starting from...)
Name:Racer - 12" 3-Jaw D1-6 (pricing starting from...)
Price: $1,649.00
Stock No:Racer15
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - 12" 4-Jaw D1-6 (pricing starting from...)
Name:Racer - 12" 4-Jaw D1-6 (pricing starting from...)
Price: $1,158.00
Stock No:Racer16
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - 15" Toolmakers Face Plate
Name:Racer - 15" Toolmakers Face Plate
Price: $860.00
Stock No:Racer28
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Steady Rest - Bronze Type, 6" Capacity
Name:Racer - Steady Rest - Bronze Type, 6" Capacity
Price: $836.00
Stock No:Racer34b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Follow Rest - Roller Type, 2/1/2" Capacity
Name:Racer - Follow Rest - Roller Type, 2/1/2" Capacity
Price: $800.00
Stock No:Racer39
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Digital Readout - Fagor, NewAll, Heidenhain, Acu-Rite (Pricing on Request)
Name:Racer - Digital Readout - Fagor, NewAll, Heidenhain, Acu-Rite (Pricing on Request)
Price: $0.00
Stock No:Racer2
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Set of 17-5C Round Collets - 1/16" to 1-1/16" x 16ths (call for information/pricing)
Name:Racer - Set of 17-5C Round Collets - 1/16" to 1-1/16" x 16ths (call for information/pricin...
Price: $364.00
Stock No:Racer24
ADD TO MACHINE QUOTE:

Racer - Set of 35 piece 5C Collets - 1-1/6" to 1-1/8" x 32nds
Name:Racer - Set of 35 piece 5C Collets - 1-1/6" to 1-1/8" x 32nds
Price: $394.00
Stock No:Racer25
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Safety Guard & Headstock Door Interlock
Name:Racer - Safety Guard & Headstock Door Interlock
Price: $399.00
Stock No:Racer60
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Work Light
Name:Racer - Work Light
Price: $284.00
Stock No:Racer61
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Telescopic Taper Attachment
Name:Racer - Telescopic Taper Attachment
Price: $3,295.00
Stock No:Racer1b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Drill Chuck, 1/32" - 1/2" Capacity with Arbor
Name:Racer - Drill Chuck, 1/32" - 1/2" Capacity with Arbor
Price: $241.00
Stock No:Racer30b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Micrometer Carriage Stop, INCH
Name:Racer - Micrometer Carriage Stop, INCH
Price: $551.00
Stock No:Racer44b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Chip Guard, Saddle Mounted
Name:Racer - Chip Guard, Saddle Mounted
Price: $234.00
Stock No:Racer47b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Coolant Assembly with 5 Gallon Tank & Pump
Name:Racer - Coolant Assembly with 5 Gallon Tank & Pump
Price: $726.00
Stock No:Racer57b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Hand Wheel Collet Chuck 5C D1
Name:Racer - Hand Wheel Collet Chuck 5C D1
Price: $1,894.00
Stock No:Racer71b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Sjogren Collet Chuck D1 Front Mount 5 C Hand Wheel Type
Name:Racer - Sjogren Collet Chuck D1 Front Mount 5 C Hand Wheel Type
Price: $3,128.00
Stock No:Racer22b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Hand Wheel Collet Chuck 5C D1 - Bison D1 Backplate
Name:Racer - Hand Wheel Collet Chuck 5C D1 - Bison D1 Backplate
Price: $1,975.00
Stock No:Racer72b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Atlas Self-Contained Front D1- Mount Air Collet Chuck
Name:Racer - Atlas Self-Contained Front D1- Mount Air Collet Chuck
Price: $9,060.00
Stock No:Racer77b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Aloris 5-Piece Quick Change Tool Post Set: Super Precision Tool Post, Turning and Facing Holder, Boring Holder, Universal Parting Blade Holder
Name:Racer - Aloris 5-Piece Quick Change Tool Post Set: Super Precision Tool Post, Turning and Facing Hol...
Price: $2,364.00
Stock No:Racer32b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Aloris 3-Piece Quick Change Tool Post Set: Super Precision Tool Post, Turning and Facing Holder, Boring Holder
Name:Racer - Aloris 3-Piece Quick Change Tool Post Set: Super Precision Tool Post, Turning and Facing Hol...
Price: $1,308.00
Stock No:Racer20b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Indexing Tool Post: Indexable Turning and Facing Holder, Indexable Boring, Turning and Facing Holder, Cutoff Holder
Name:Racer - Indexing Tool Post: Indexable Turning and Facing Holder, Indexable Boring, Turning and Facin...
Price: $3,501.33
Stock No:Racer31b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Aloris 7-Piece Quick Change Tool Post Set: Super Precision Tool Post, Turning and Facing Holder, Boring Holder, Universal Parting Blade Holder, Knurling Holder, Carbide Insert Blade, GTN-4.8P Insert (3)
Name:Racer - Aloris 7-Piece Quick Change Tool Post Set: Super Precision Tool Post, Turning and Facing Hol...
Price: $2,965.00
Stock No:Racer21b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Anti-Rotation Key
Name:Racer - Anti-Rotation Key
Price: $473.00
Stock No:Racer78b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Micrometer Carriage Stop, METRIC
Name:Racer - Micrometer Carriage Stop, METRIC
Price: $551.00
Stock No:Racer45b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Follow Rest - Bronze Type, 2/1/2" Capacity
Name:Racer - Follow Rest - Bronze Type, 2/1/2" Capacity
Price: $718.00
Stock No:Racer38b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Chuck Guard, Head Stock Mounted
Name:Racer - Chuck Guard, Head Stock Mounted
Price: $551.00
Stock No:Racer46b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Steady Rest - Roller Type, 6" Capacity
Name:Racer - Steady Rest - Roller Type, 6" Capacity
Price: $1,018.00
Stock No:Racer35b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Follow Rest - Roller Type, 3-1/2" Capacity
Name:Racer - Follow Rest - Roller Type, 3-1/2" Capacity
Price: $680.00
Stock No:Racer41b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Live Center 4MT - Ritten Standard
Name:Racer - Live Center 4MT - Ritten Standard
Price: $543.33
Stock No:Racer80
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Live Center 4MT - Ritten Heavy Duty
Name:Racer - Live Center 4MT - Ritten Heavy Duty
Price: $717.33
Stock No:Racer83
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Live Center 4MT - Ritten Long Nose
Name:Racer - Live Center 4MT - Ritten Long Nose
Price: $543.33
Stock No:Racer86
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Live Center 3MT/4MT/5MT - Ritten Pipe
Name:Racer - Live Center 3MT/4MT/5MT - Ritten Pipe
Price: $738.67
Stock No:Racer88b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Live Center 3MT/4MT/5MT - Ritten Bull Nose
Name:Racer - Live Center 3MT/4MT/5MT - Ritten Bull Nose
Price: $1,114.67
Stock No:Racer89b
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Racer - Leadscrew Covers (On Request)
Name:Racer - Leadscrew Covers (On Request)
Price: $0.00
Stock No:Racer90
MANUFACTURER:Racer Machinery International Inc.
ADD TO MACHINE QUOTE:

Additional information:

Photo shown is of Model #1660. Photo of Model #1640 not available at this time. 

Note: Shown With Optional Digital Readout.  See Pricing Below!

  • Similar Machines
  • New
  • Used
  • OEM Brochure
  • Shipping
  • Manufacturer
Similar Machines New Used OEM Brochure Shipping Manufacturer

* Temporary specifications subject to verification.

   All quotations subject to prior sale.

   Due to fluctuating markets and Gas Prices, Quotes are good for 15 days from quote date.

   Pricing & Payment Methods: In order to be competitive, Our prices reflect a 3% discount

   for payment in company check, money order or cash. Credit cards will be subject to a 3-5%

   fee depending on credit card company.