| Punching Capacity: |
65 Ton |
| |
1 - 1/16 " In 3/4" |
| Special Tooling: |
4" Max. Dia. |
| Throat Depth: |
9" |
| Flat Bar Shear: |
24" Length |
| |
1" x 6" |
| |
3/4" x 10" |
| |
1/2" x 12" |
| |
3/8" x 16" |
| |
1/4 x 24" |
| Opt. Sabre Blade: |
1" x 6" |
| |
1/2" x 16" |
| Angle Shear 90 Degrees: |
6" x 6" x 3/8" |
| |
5" x 5" x 1/2" |
| Angle Shear 45 Degrees (With Bar Shear): |
3" x 3" x 3/8" |
| |
4" x 4" x 1/2" |
| Brake 12": |
40 Ton |
| Brake 24": |
30 Ton |
| Open End Brake: |
Max. 1/4" x 6" |
| |
Flat Or Angle Iron |
| Pipe Notcher: |
3/4", 1" |
| Schedule 40: |
1 - 1/4" |
| |
1- 1/2", 2 |
| Rectangle Notcher: |
2" x 2- 1/2", x 3/8" |
| 90 Degrees V. Notcher: |
6" x 6" x 5/16" |
| Channel Shear: |
2" To 5" Adj. |
Rod Shear |
| Round Rod (Max.): |
1/4" To 1 - 1/4", 9 |
| Square Rod (Max.): |
1/4" To 1", 1 Cavity |
| Square Tube Shear: |
1/2" To 2", 12 Gauge |
| Square Tube Shear: |
1/2" To 12 Gauge |
| Picket Tool: |
1/2", 3/4" & 1" |
| |
16 Gauge |
| Offset Die Holder: |
Max. 40 Ton |
| Strokes Per Minute In Light Material: |
40 SPM |
| Strokes Per Minute In Heavy Material: |
17 SPM |
| Hydraulics: |
2,600 PSI |
| Motor Standard: |
5 HP 3 PH |
| |
230/460 |
| |
208/380/575 |
| Motor Optional: |
5 HP 1PH |
| |
230 V |
| Dimensions: |
W - 24" |
| |
66" |
| |
L - 60" |
| |
H - 66" |
| Weight: |
2750 LBS. |
| Optional Equipment Available: 6509-24M: |
Part # |
| Optional UL Approval: |
005710 |
NEMA 12 Fusible Disconnect |
| Single Phase Motor, 5 HP 220 Volt/60 HZ: |
006915 |
| Work Light (Factory Installation): |
090392 |
| Work Light (When Ordered Sepatate- Includes Transformer): |
090395 |
| 36" Punch Gaugeing Extension (Left Hand Multi-Loc): |
029291 |
| |
Includes Three Vertical Stop |
| |
Blocks Material Thickness 16 |
| |
Gauge To 3/4" |
| 36" Punch Gauging Extensions (Right Hand Multi-Loc): |
029289 |
| |
Includes Three Vertical Stop |
| |
Blocks Material Thickness 16 |
| |
Gauge To 3/4" |
| 85" Punch Gauging Extension (Left Hand Multi-Loc): |
029292 |
| |
Includes Six Vertical Stop |
| |
Blocks Material Thickness 16 |
| |
Gauge To 3/4" |
| 85" Punch Gauging Extension (Right Hand Multi-Loc): |
029293 |
| |
Includes Six Vertical Stop |
| |
Blocks Material Thickness 16 |
| |
Gauge To 3/4" |
| Punch Slug Receptacle: |
341150 |
| Tool Table Extension W/Punch & Die Storage Rack: |
026695 |
| 48" Deluxe Back Gauge: |
025603 |
| 48" Electric Back Gauge: |
026600 |
| Infeed Conveyor (24" x 5' W/Support Arms): |
026980 |
| 12" Brake W/2" V Opening Dies Std.-For 1/4" Material: |
026300-026211 |
| 24" Brake W/2" V Opening Dies Std.-For 1/4" Material: |
026303-026211 |
| 12" Brake Table W/Scale & Squaring Arm: |
026865 |
| 24" Brake Table W/Scale & Squaring Arm: |
026880 |
| Brake Length Gauge W/Scale: |
026800 |
| Open End Brake (Maximum 1/4" x 6" Flat Or 1/4" x 6" Angle Iron): |
001360-001385 |
Optional Brake Dies Available 1" To 4" V Openings |
| Pipe Notcher Housing (Separate Dies Required For Each Size): |
001195 |
| 3/4" Schedule 40 Pipe Upper & Lower Dies: |
001220 |
| 1" Schedule 40 Pipe Upper & Lower Dies: |
001222 |
| 1-1/4" Schedule 40 Pipe Upper & Lower Dies: |
001224 |
| 1-1/2" Schedule 40 Pipe Upper & Lower Dies: |
001226 |
| 2" Schedule 40 Pipe Upper & Lower Dies: |
001228 |
| Puncher Pusher For Pipe Notcher: |
001205 |
| Tool Table Pusher For Pipe Notcher: |
001207 |
| Rectangle Notcher 2 x 2-1/2 x 3/8": |
026000 |
| 90 Degree V Notcher 6 x 6 x 5/16": |
016600 |
| Channel Shear (2" To 6" Adjustable) (Maximum 5" Std. Channel): |
026372-016575 |
| Rod Shear (Up To 1" Square Or 1-1/4" Round): |
026774-026247 |
| Square Tube Shear (1/2" To 2" 14 Gauge Max.): |
026350-016590 |
| Picket Tool Housing (Separate Dies Required For Each Size): |
001293-016550 |
* Mounts In The Punch Station Only |
| 1/2" 14 Gauge Max. Upper & Lower Dies: |
001150-001249 |
| 3/4" 14 Gauge Max. Upper & Lower Dies: |
001190-001292 |
| 1" 14 Gauge Max. Upper & Lower Dies: |
001162-001264 |
| #45 Retaining Nut (Punching From 1-19/32" To 4"): |
016096 |
| Heavy Duty Retaining Nut: |
026500 |
| |
(Oversized Punching From |
| |
1-19/32" To 4") |
| Wrench For Heavy Duty Retaining Nut: |
018507 |
| Die Insert For 2-1/2" O.D. Dies: |
006252 |
| Die Insert For 3" O.D. Dies: |
006302 |
| Die Holder For 6" x 6" Dies: |
028300 |
| Offset Die Holder (For Flange Punching -2" O.D. Dies Only Max. 40 Ton): |
013186 |
| Stripper For Offset Die Holder (Includes Guard): |
012127 |
| Urethane Stripper Assembly: |
026040 |
Note: The Urethane Stripper Works With The #40 Tooling Only-Maximum |
Diameter 1-1/4". The Urethane Stripper Will NOT Work With The Offset |
Die Holder |
Unequal Leg Angle Shear Blades |
| 66 Degree (4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2"): |
016238 |
| 70 Degree (4" x 3", 2-1/2" x 2", 2" x 1-1/2": |
016239 |
| 74 Degree (6" x 4", 5" x 3-1/2", 3" x 2"): |
016240 |
| 80 Degree (6" x 3-1/2", 5" x 3"): |
016241 |
| Upper Angle Blade Quick Change Hardware: |
026708 |
| Angle Shear 6 x 6 x 3/8" Or 5 x 5 x 1/2" (When Ordered Separate): |
026727 |
| Hydraulic Bar Shear Hold Down: |
017580 |
Note: Must Be Factory Installed |
Economy Fabricating Packages: |
#2545 Includes: |
#40 & #82 Round Punch & Die Package |
| Rounds: |
11/32, 15/32, 17/32, 19/32, |
| |
21/32, 23/32, 25/32, 27/32, |
| |
29/32, 31/32, 1-1/32 & 1-3/16 |
#2855 Includes: |
Deluxe #40 & #82 Punch & Die Package |
| Rounds: |
1/4, 9/32, 5/16, 3/8, 13/32, |
| |
7/16, 1/2, 9/16, 5/8, 11/16, |
| |
3/4, 13/16, 7/8, 15/16, 1", |
| |
1-1/16, 1-1/8, 1-3/16, & 1-1/4 |
| Squares: |
1/2, 3/4 & 7/8 |
| Ovals: |
9/32 x 3/4, 5/16 x 3/4, 9/32 x |
| |
1, 5/16 x 1, 13/32 x 1, 7/16 x |
| |
1, 17/32 x 1, 9/16 x 1, 9/16 x |
| |
1-1/4, 11/16 x 1-1/4 & 13/16 x |
| |
1-1/4 |
| #2747 Includes:: |
12" Brake, Brake Table W/Scale |
| |
& Squaring Arm, Brake length |
| |
W/Scale, Work Light, Punch |
| |
Slug Receptacle, 48" Back |
| |
Gauge & Tool Table Extension |
| #2752 Includes:: |
24" Brake, Brake Table W/Scale |
| |
& Squaring Arm, Brake Length |
| |
Gauge W/Scale, Work Light, |
| |
Punch Slug Receptacle, 48" |
| |
Back Gauge & Tool Table |
| |
Extension |
